MiniAir Product Range

MiniAir Replacement Snap Heads

The MiniAir anemometers with plastic anemometer heads are designed with snap on heads that can be replaced on site without any need for recalibration or adjustment. Replacement snap heads should be of the same original size, flow range and vane material as the original probes. A table is provided on this page to allow you to select the correct replacement snap head for your MiniAir probe.

Price range : £181.15 - £552.99

MiniAir Brass Anemometer for Solvent Flows

MiniAir Brass Anemometers for Aggressive Gas Flow Monitoring

The MiniAir Brass anemometers are designed for monitoring the flows of aggressive gases with the Macro sized anemometer. The anemometer head is a Brass measuring head with Aluminium vanes and are ideal for aggressive gases that could react with the standard plastic or stainless steel measuring heads. MiniAir probes are available with a frequency, 0-2V and 4-20mA outputs and 2m of cable. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £807.50 - £1,080.05

MiniAir 64 High Temp Steel Anemometer with Separate Electronics

MiniAir64 High Temperature Steel Anemometers with Separate Electronic Housing

These MiniAir 64's are Steel vane anemometer for high temperature air and gas flows with a separate electronics housing with a linear current output. The separate electronics housing allows the Steel anemometer to be used for air flow measurements up to 250°C. The MiniAir 64 provides a 4-20mA output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro and Mini sized turbines. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £2,342.15 - £2,429.36

MiniAir 64 Steel Anemometer with Separate Electronics

MiniAir64 Steel Anemometers with Separate Electronic Housing

These MiniAir 64's are vane anemometer with a separate electronics housing for measuring the flow velocities of corrosive, high temperatures gases up to a maximum temperature of 140°C. The MiniAir 64 will provide a linear 4-20mA output for flow ranges of 0-20 or 0-40m/s. Units with Stainless Steel turbines are also available for use up to 250°C. Probes are available with Micro and Mini sized sensing heads. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £2,038.70 - £2,167.74

MiniAir 60 High Temp Steel Anemometer with Separate Electronics

MiniAir60 High Temperature Steel Anemometers with Separate Electronic Housing

These MiniAir 60's are Steel vane anemometer for high temperature air and gas flows with a separate electronics housing with a linear frequency output. The separate electronics housing allows the Steel anemometer to be used for air flow measurements up to 250°C. The MiniAir 60 provides a 0-4vDC/TTL output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro and Mini sized turbines. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £2,254.05 - £2,342.15

MiniAir 60 Steel Anemometer with Separate Electronics

MiniAir60 Steel Anemometers with Separate Electronic Housing

These MiniAir 60's are vane anemometer with a separate electronics housing for measuring the flow velocities of corrosive, high temperatures gases up to a maximum temperature of 140°C. The MiniAir 60 will provide a linear 0-4vDC/TTL output for flow ranges of 0-20 or 0-40m/s. Units with Stainless Steel turbines are also available for use up to 250°C. Probes are available with Micro and Mini sized sensing heads. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £1,995.99 - £2,083.20

MiniAir 6 High Temp Steel Anemometer with Separate Electronics

MiniAir6 High Temperature Steel Anemometers with Separate Electronic Housing

These MiniAir 6's are Steel vane anemometer for high temperature air and gas flows with a separate electronics housing with a linear voltage output. The separate electronics housing allows the Steel anemometer to be used for air flow measurements up to 250°C. The MiniAir 6 provides a 0-2V output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro and Mini sized turbines. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £2,254.05 - £2,342.15

MiniAir 6 Steel Anemometer with Separate Electronics

MiniAir6 Steel Anemometers with Separate Electronic Housing

These MiniAir 6's are vane anemometer with a separate electronics housing for measuring the flow velocities of corrosive, high temperatures gases up to a maximum temperature of 140°C. The MiniAir 6 will provide a linear 0-2V output for flow ranges of 0-20 or 0-40m/s. Units with Stainless Steel turbines are also available for use up to 250°C. Probes are available with Micro and Mini sized sensing heads. The sensors are simple to install and can be easily integrate into a fixed system with other instrumentation including data loggers or displays.

Price range : £1,951.50 - £2,083.20

MiniAir 20 Starter Kit

The MiniAir 20 starter kits include the MiniAir 20 Mini anemometer probes with a plastic snap head and Aluminium vane with options for flow ranges of 0-20m/s or 0-40m/s, MC20 display and carrying case. Additional probes, extensions rods and snap heads may be purchased separately. The MC20 display can be used with any MiniAir 20 anemometer probe, MiniWater 20 turbine flow sensors and HygroAir temperature and humidity probes. The carry case has a foam inlay allowing the MC20 display, 3 different sized MiniAir 20 probes, replacement snap heads, HygroAir sensor, extension rods and IR printer to be easily housed in the case

Price range : £47.67 - £1,020.18

MX6 Replacement Sensor Cells

The MX6 gas detectors include ﬁeld replaceable, plug-in sensors. The user can replace any sensor in the ﬁeld and have the instrument in service after performing a simple ﬁeld calibration. Up to 5 sensor can be installed, each in one or more specific location.

Price range : £221.00 - £910.00