MiniAir Product Range

The MiniAir anemometers with plastic anemometer heads are designed with snap on heads that can be replaced on site without any need for recalibration or adjustment. Replacement snap heads should be of the same original size, flow range and vane material as the original probes. A table is provided

The MiniAir Brass anemometers are designed for monitoring the flows of aggressive gases with the Macro sized anemometer. The anemometer head is a Brass measuring head with Aluminium vanes and are ideal for aggressive gases that could react with the standard plastic or stainless steel measuring heads

These MiniAir 64's are Steel vane anemometer for high temperature air and gas flows with a separate electronics housing with a linear current output. The separate electronics housing allows the Steel anemometer to be used for air flow measurements up to 250°C. The MiniAir 64 provides a 4-20mA outpu

These MiniAir 64's are vane anemometer with a separate electronics housing for measuring the flow velocities of corrosive, high temperatures gases up to a maximum temperature of 140°C. The MiniAir 64 will provide a linear 4-20mA output for flow ranges of 0-20 or 0-40m/s. Units with Stainless Steel

These MiniAir 60's are Steel vane anemometer for high temperature air and gas flows with a separate electronics housing with a linear frequency output. The separate electronics housing allows the Steel anemometer to be used for air flow measurements up to 250°C. The MiniAir 60 provides a 0-4vDC/TTL

These MiniAir 60's are vane anemometer with a separate electronics housing for measuring the flow velocities of corrosive, high temperatures gases up to a maximum temperature of 140°C. The MiniAir 60 will provide a linear 0-4vDC/TTL output for flow ranges of 0-20 or 0-40m/s. Units with Stainless St

These MiniAir 6's are Steel vane anemometer for high temperature air and gas flows with a separate electronics housing with a linear voltage output. The separate electronics housing allows the Steel anemometer to be used for air flow measurements up to 250°C. The MiniAir 6 provides a 0-2V output re

These MiniAir 6's are vane anemometer with a separate electronics housing for measuring the flow velocities of corrosive, high temperatures gases up to a maximum temperature of 140°C. The MiniAir 6 will provide a linear 0-2V output for flow ranges of 0-20 or 0-40m/s. Units with Stainless Steel turb

The MiniAir 20 starter kits include the MiniAir 20 Mini anemometer probes with a plastic snap head and Aluminium vane with options for flow ranges of 0-20m/s or 0-40m/s, MC20 display and carrying case. Additional probes, extensions rods and snap heads may be purchased separately. The MC20 display

The MX6 gas detectors include field replaceable, plug-in sensors. The user can replace any sensor in the field and have the instrument in service after performing a simple field calibration. Up to 5 sensor can be installed, each in one or more specific location.

The BM25 gas detectors include field replaceable, plug-in sensors. The user can replace any sensor in the field and have the instrument in service after performing a simple field calibration. Up to 5 sensor can be installed, each in one or more specific location.