Universal Controller N3000

Quick Overview

The N3000 is a Big Digit Universal Process Controller similar to the N2000 display but larger with 18mm PV Red Digits and 13mm SV Green Digits in a 96 x 96 x 92mm display. The basic N3000 unit includes one universal input, two SPST relays, two SPDT relays, 24vDC output for powering remote transmitters, one digital input, a 4-20mA input for remote setpoint and one 4-20mA output which can also be used as a digital input or output. RS485 Modbus RTU protocols are available as an option.

View Options

Details

With a sophisticated and consistent software and its advanced truly universal circuitry, the N3000 accepts configuration of both input signal and control output through the front keyboard without any internal hardware change.
Power supply for remote loop powered transmitters is standard and is a must for high-end applications.
From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC’s or SCADA networks, the N3000 is the right answer to your needs for industrial or laboratory automation.

Double LED display: red for PV (18 mm) and green for SV (13 mm).
Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc
Sampling rate: 4 measurements per second.
Measured value resolution: 12,000 levels.
One digital input for dry contact with 5 programmable functions.
Remote setpoint input for 4-20 mAdc signal.
Dual SPST 3A/250 Vac relays and dual SPDT 5A/250 Vac relays can be individually programmed for control or alarm.
Isolated 4-20mA output with 1500-level resolution, maximum 550 ohm load for control or PV/SV retransmission. It can also be configured for digital input or output (10 Vdc/20 mA).
Auto tuning PID control. Auto/Manual mode, bumpless transfer.
Programmable Soft start up to 9999 seconds.
Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments.
Control output update: 250 ms.
Up to four configurable relays, two timer alarms.
Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event.
Alarm initial blocking function
Power: 85 to 250 Vac, 50/60 Hz; optional 24 Vdc/ac.
Maximum consumption: 3 VA.
24 Vdc/30 mA supply output for remote transmitter excitation.
RS485 comm with Modbus RTU protocol (optional).
Front panel: IP65, Polycarbonate UL94 V-2.
Back panel: IP30, ABS+PC UL94 V-0.
Circuitry can be removed from the front panel.
Operating environment: 0 to 55ºC, 20 to 85%RH.
Dimensions: 96 x 96 x 92 mm.
Panel cutout: 93 x 93 mm.
Weight: 330 g.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM
8300200130	N3000 Big Digit Universal Controller suitable for PT100, Thermocouples, 4-20mA, 0-50mV and 0-5vDC inputs with Double LED display: 18mm High Red Digits for Process Variable (PV) and 13mm High Green for Setpoint Value (SV). One digital input for dry contact. Isolated 4-20mA output channel, also configurable for Digital I/O (10vDC @ 20mA). Dual SPST 250vAC @ 3A relays and dual SPDT 250vAC @ 5A relays can be individually programmed for control or alarm. Dimensions 96 x 96 x 92mm, operating temperature 0 to 55°C. Programmable via front keypad and USB interface with QuickTune software. Power Supply: 100-240vAC	Datasheet Size: (1.16 MB)	£100.34	or call us for a quote
8300200134	N3000 Dig Digit Universal Controller suitable for PT100, Thermocouples, 4-20mA, 0-50mV and 0-5vDC inputs with Double LED display: 18mm High Red Digits for Process Variable (PV) and 13mm High Green for Setpoint Value (SV). One digital input for dry contact. Isolated 4-20mA output channel, also configurable for Digital I/O (10vDC @ 20mA). Dual SPST 250vAC @ 3A relays and dual SPDT 250vAC @ 5A relays can be individually programmed for control or alarm. Dimensions 96 x 96 x 92mm, operating temperature 0 to 55°C. Programmable via front keypad and USB interface with QuickTune software. Power Supply: 24vDC.		£101.70	or call us for a quote
8300200220	N3000 Dig Digit Universal Controller suitable for PT100, Thermocouples, 4-20mA, 0-50mV and 0-5vDC inputs with Double LED display: 18mm High Red Digits for Process Variable (PV) and 13mm High Green for Setpoint Value (SV). One digital input for dry contact. Isolated 4-20mA output channel, also configurable for Digital I/O (10vDC @ 20mA). Dual SPST 250vAC @ 3A relays and dual SPDT 250vAC @ 5A relays can be individually programmed for control or alarm, plus RS485 Modbus RTU Comms. Dimensions 96 x 96 x 92mm, operating temperature 0 to 55°C. Programmable via front keypad and USB interface with QuickTune software. Power Supply: 100-240vAC		£121.35	or call us for a quote
8300200224	N3000 Big Digit Universal Controller suitable for PT100, Thermocouples, 4-20mA, 0-50mV and 0-5vDC inputs with Double LED display: 18mm High Red Digits for Process Variable (PV) and 13mm High Green for Setpoint Value (SV). One digital input for dry contact. Isolated 4-20mA output channel, also configurable for Digital I/O (10vDC @ 20mA). Dual SPST 250vAC @ 3A relays and dual SPDT 250vAC @ 5A relays can be individually programmed for control or alarm, plus RS485 Modbus RTU Comms. Dimensions 96 x 96 x 92mm, operating temperature 0 to 55°C. Programmable via front keypad and USB interface with QuickTune software. Power Supply: 24vDC		£120.68	or call us for a quote

Menu

Universal Controller N3000

Products

Data Loggers

Displacement & Position Sensors

Display & Control Products Signal Amplifiers & PSUs

Flow Meters

Gas Detection Equipment

Gyros & Accelerometers IMU's & Tilt Sensors

Hire Equipment Data Loggers, Flow & Energy Meters, Weather Stations

Level & Distance Sensors

Load & Torque Sensors

Pressure Sensors

Radio & GSM Telemetry

Serial Ethernet & ModBus Communications

Solar & Wind Power Batteries & Enclosures

Subsea & Offshore Systems

Temperature and Humidity

Test & Calibration

Vibration Monitoring

Voltage & Current Sensors Energy Monitoring Systems

Water Quality & Waste Water Management Systems

Weather Stations and Instruments

Accessories − Enclosures, Cable, Connectors & PSUs

Universal Controller N3000

Quick Overview

Details

Components / Downloads

+44 (0) 1382 443000