Fixed gas sensors for a wide range of toxic and flammable gases including oxygen, hydrogen sulphide, carbon monoxide, CO2, SO2, HCL, flammable gases - methane, butane, pentane and many others. Available with intrinsic safety and flameproof designs. 4-20mA outputs and 3 wire ( bridge ) outputs.
OLCT100 Fixed Gas Detector.
Designed for the detection of explosive gases, toxic gases or oxygen, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and available in explosion safe or intrinsically safe versions. In addition, infrared sensors are also available for more severe environmental conditions, where the presence of poisons could harm the use of catalytic sensors. The unit is also SIL 2 certified
Hazardous Area Approved | |
Price range : £0.00 - £0.00
OLCT60 Fixed Gas Detector with Display
The OLCT60 is a new high quality industrial fixed gas detector suitable for a wide range of industrial applications for the detection of flammable, toxic gases or Oxygen. The transmitters has a digital display and will provide a 4-20mA output. The detectors are ATEX approved, SIL 2 certified and available as explosion-proof XP or intrinsically safe IS sensors and can be used remotely to provide detection in Zone 0. The detector units are IP66 and made from 316L Stainless Steel and the infrared sensor options allow for detection in severe environmental conditions, or where the presence of poisons could harm a catalytic cell.
Hazardous Area Approved | |
Price range : £0.00 - £0.00
OLCT80 Standalone Fixed Gas Detector with Flameproof Sensors
The OLCT80 is a standalone gas detector with an integrated display and 3 built-in programmable relays, plus the detector can also accept 2 x 4-20mA or digital inputs from other sensors to be integrated onto the RS485 output. The RS485 connection provides 1 to 3 addresses, 1 for the sensor and 2 to cover the auxiliary inputs. The detectors are ATEX approved and available with catalytic, electrochemical, infrared or semiconductor sensors. The detector units are IP66 with an Aluminium housing and 316L Stainless Steel sensor housing. The units in this section are supplied with Flameproof approved sensors and 2.4GHz wireless transmitter units suitable for ATEX zone 1 areas.
Hazardous Area Approved | |
Price range : £24.00 - £2,850.00
OLCT80 Standalone Fixed Gas Detector with Intrinsically Safe Sensors
The OLCT80 is a standalone gas detector with an integrated display and 3 built-in programmable relays, plus the detector can also accept 2 x 4-20mA or digital inputs from other sensors to be integrated onto the RS485 output. The RS485 connection provides 1 to 3 addresses, 1 for the sensor and 2 to cover the auxiliary inputs. The detectors are ATEX approved and available with catalytic, electrochemical, infrared or semiconductor sensors. The detector units are IP66 with an Aluminium housing and 316L Stainless Steel sensor housing.
Hazardous Area Approved | |
Price range : £24.00 - £3,035.00
OLC(T)10 EXPLO Gas Detectors for Explosive Gases
The OLC(T)10 Flammable gas detectors are designed for commercial applications and units are available for safe area and hazardous area applications. These detectors are ideal for the continuous monitoring of flammable gases present in car parks or boiler rooms. the OLC10 TWIN units can be connected in a single line to allow two detectors to connect back to the one controller channel. These detectors provide a wheatstone bridge or 4-20mA output. The OLCT10 detectors can be used with the MX16 to provide a simple solutions for monitoring small rooms for CH4, O2, LPG, H2 or CO2. Only Catalytic Sensor are currently ATEX Approved
Hazardous Area Approved |
|
Price range : £190.00 - £240.00
OLCT10 Gas Detectors for Refrigerant and Toxic Gases
The OLCT10 gas detectors are designed for private or public commercial area. Ensuring the protection of equipment and people in the presence of post-combustion, exhaust gases or refrigerants in ambient air. These detectors are ideal for the continuous monitoring of toxic gases in car parks, boiler rooms and plant rooms for shops and warehouses. These detectors provide a 4-20mA output that can be combined with the MX32 controller unit to provide a low cost gas monitoring system.
Price range : £305.00 - £400.00
OLCT10N Fixed Digital Gas Detectors
The OLCT10N gas detectors are designed for common gases in commercial and light industrial applications. These detectors are ideal for use in combination with the MX16, MX32 or MX43 gas controllers. Up to 32 OLCT10N detectors can be connected on a same digital line or distributed on 8 lines. These detectors provide an RS485 Modbus output, allowing a fast and accurate response.
Price range : £85.00 - £780.00
CTX 300 Gas Detector for Non-Hazardous Areas
The CTX 300 gas detector is designed with a robust polycarbonate housing for gas detection in safe areas of Oxygen, Carbon Dioxide, Toxic and refrigerant gases. The polycarbonate housing is very durable and is not affected by harsh environments. The CTX 300 comes equipped with pre-calibrated sensor units and allows for maintenance by a single person. Units provide a 4-20mA output for the gas levels detected and an optional display can be incorporated.
Price range : £0.00 - £985.00
SafEye Quasar 900 Open Path Combustible Hydrocarbon Gas Detector
The New SafEye Quasar 900 is an open path detection system which provides continuous monitoring for combustible hydrocarbon gases. It employs “spectral fingerprint” analysis of the atmosphere between a transmitter and detector unit to determine the levels of the Hydrocarbon gas present using the Differential Optical Absorption Spectroscopy (DOAS) technique. The Xenon Flash Infrared transmitter and receiver units can be separated over a line of sight from 7m up to 200m. The Quasar 900 transmitter and receiver are both housed in a rugged, stainless steel, ATEX and IECEx approved enclosure. The Quasar 900 includes heated windows to eliminate condensation and icing, HART capability for digital communication and is designed to meet SIL2 per IEC61508 and FM performance approved per FM6325 and tested per EN60079-29-4.
Price range : £313.28 - £12,044.97
GS-CO2 Space Mounted CO2 Transmitters
The GS-CO2 is a non-dispersive infrared sensor for measuring CO2 concentrations in controlled spaces. The GS-CO2-S is designed for use in indoor spaces to monitoring Carbon Dioxide levels using a microprocessor based electronics and a unique self calibration algorithm to improve long term stability and accuracy. It is ideal to ensure adequate ventilation while maximizing energy savings by ventilating at the optimum level. Units are also available with integrated temperature and relative humidity sensors to provide additional parameters. These units are ideal for monitoring CO2 levels, temperature and RH in commercial buildings, laboratories and public spaces. Units can provide either a 4-20mA or 0-10V output, LED indicators and LCD display.
Price range : £123.54 - £325.25