Inclinometers & Tilt Sensors

The DMI600 is a dual axis inclinometer with a digital display. The digital display shows the X & Y axis inclination on the double row display. The unit can be fitted with an internal Lithium battery or an external 12vDC power supply. Battery powered units will provide 4 hours operation on a full charge. The unit uses a miniature solid pendulum and each one is calibrated before leaving the factory. IP65 Aluminium Oxide enclosure with 2 x M3 fixing screws.

Accustar Electronic Inclinometer. Solid state capacitance device for angle measurement up to +/- 60 degrees. This small, rugged, light weight device provides high accuracy (+/-0.1 deg) angle measurement at a reasonable cost.

The LCA Series inclinometers are part of Omni Instruments Eco line of instruments, offering exceptional performance at a low price point. The LCA units features a rugged, industrial, waterproof case housing with units available for single (X-axis) or dual (X & Y) axis inclinometers. The inclinometer provide a 0-5vDC output at 20Hz with a 0.05 resolution.

Dual Axis, rugged, industrial grade HAI Inclinometers are available with both 4-20mA analog and serial data outputs. Accuracy up to 0.02, fast angle response of 20Hz and a long term stability of less than 0.02. The aluminum casing is waterproof and makes installation easy.

The XHAI is a dual axis inclinometer offering high accuracy in a rugged industrial, submersible housing with a waterproof MIL spec connector. Inclinometers are available with standard V and mA analogue outputs, or a serial output such as CAN2.0A and OPENCAN. Each inclinometer is fitted with a built-in temperature sensor to ensure high repeatability, with outputs automatically corrected for environmental conditions to provide a reliable output in both low and high temperature environments.

The DQG-Series is a small inclinometer based on dual axis tilt sensor for horizontal mounting, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal. The unit has an IP66 metal housing and an 8-30VDC power supply.

The LSO Series is a high precision gravity referenced servo inclinometer that can be used for a wide variety of industrial, commercial and military applications. Models are available in a variety of ranges with low impedance output signal. Electrical terminations are via 6-way connector (LSOC) or solder pins (LSOP).

The T233/5 Series is a range of dual axis gravity referenced servo inclinometers that can be used for a wide variety of industrial and military applications where high precision angular measurements are required in rugged and robust applications where high levels of vibration and mechanical shock up to 1500g are encountered. Models are available in a variety of ranges from ±1 degree to ±90 degrees with low impedance output voltage signals and are precisely set up for dual axis operation. Electrical terminations are via a connector on the T233 or solder pins on the T235 variant.

The LSI Series is a precision gravity referenced servo inclinometer that can be used for a wide variety of industrial and military applications. Models are available with a choice of ranges with low impedance output signal. Electrical terminations are via solder posts.