Trip Amps, Signal Converters and Isolators

The 4114 is a programmable universal transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The unit converts the input into a configurable 0(4)-20mA or 0-10V output that is proportional and linear to the value of the input. Units are available with the 4501 programming display or the 4511 Modbus communications/programming interface. Universal AC or DC power supply.

Universal signal conditioning module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. Analog output and 2 relays, universal power supply of 21.6 - 253 VAC and 19.2 - 300 VDC

Universal signal conditioning module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. 2 relays , universal power supply of 21.6 - 253 VAC and 19.2 - 300 VDC

The 4104 is a universal transmitters suitable for almost any voltage or current conversions. The unit will accept both unipolar and bipolar signals, operating with both passive and active inputs and outputs. The transmitters will accept any input in the range of +/-10vDC or +/-20mA to provide an output within the ranges of either +/-10V or +/-20mA. The output signal is proportional and linear to the value of the input value. Universal power supply of 21.6 - 253vAC or 19.2 - 300vDC. Unit is DIN rail mounted and can be programmed using the detachable 4501 programmable display.

The 4179 is a programmable universal transmitter suitable for converting AC voltage or current to a standard DC voltage and current signal with 2.3kV isolation. The unit is capable of measuring up to 0 to 5A RMS and 0-300V RMS directly with a narrow 500mA RMS and 500mV RMS span. Units are available with the 4501 programming display or the 4511 Modbus communications/programming interface. Universal AC or DC power supply.

The 4184 is a programmable universal transmitter suitable for converting uni/bi-polar DC voltage or current inputs to uni-bi-polar DC outputs. The unit is capable of measuring DC voltages from -300V to +300V and DC currents from -100mA to +100mV. Units are available with the 4501 programming display or the 4511 Modbus communications/programming interface. Universal AC or DC power supply.

The Slim Series is a range of 6mm isolators, converters, repeaters and splitters. This series is designed for galvanic isolation of RTD, TC, potentiometer, mA and V signals as well as conversion of these signals into a standard current/voltage signal. The series includes an isolated universal converter, 2-channel devices, signal splitters, repeaters and devices with loop supply >17 V / 20mA. All units are ATEX approved for Zone 2 environments (except 3105).

Hazardous Area Approved

Loop isolators provide signal protection by electrically isolating the input signal from the output. TxIsoLoop-1 and TxIsoLoop-2 simplify your application and avoid the undesirable ground loops by providing single and dual loop galvanic isolation. The 0/4-20 mA input is measured and an identical isolated signal is reproduced at the output. Power is drawn from the 0(4)-20 mA input loop, thus no auxiliaty power or an external power supply is need.

Front-programmable ~ mA-, V-, and W-programmable input Ramp times, jump values, reversal, chopper frequency, and deadband 3-digit LED display shows I valve % value ~ 1 or 2 channels Modulated current output for proportional valve

AC/DC input voltage ~ Adjustable output 5...24 VDC, max. 40 W Adjustable from external potentiometer ~ Short-circuit protection Thermal overload protection Standard 11-pole relay socket