Input connections |
Current input, Voltage input, Excitation
Suits direct connection, 2 wire active or passive loop and 3 wire transmitter systems. |
Input Signals |
Current input terminal accepts:- 0-10mA, 0-20mA, 4-20mA 33 Ohm input resistance
Voltage input terminal accepts:- 0-5V, 1-5V, 0-10V 1 Megohm input reistance. |
Excitation |
24V DC up to 100mA (5V, 10V and 12V optional) |
Digits |
5 digits, in a range of digit sizes: 57, 102, 144, 200, 280mm high |
Digit colour |
Red or green |
Scaling |
Digital scaling with remote programmer
|
Filtering |
Adjustable 0 to 5 Seconds |
Last digit Round-up |
Selectable 1,2,5,10,20,50 |
User linearisation |
Not available on this model |
Front panel controls |
None, all settings done with remote wired programmer. |
Power |
11-30VDC or 95-265 VAC |
Accuracy |
+/-0.05% of range |
Thermal stability - range |
+/- 100ppm/oC |
Thermal stability - offset |
+/- 100ppm/oC |
Analogue output |
Not available on this model |
Alarm output |
Optional 2 alarm relays. Rated 250VAC, 2A Resistive. May be set as HI or LO. You can select normally open or normally closed contacts. |
Serial data output |
Optional RS485 |
Logic inputs |
TARE + TARE Reset + Gross/Nett |
Connectors |
Internal detachable screw terminals. Cables come out of enclosure through compression glands. |
Bezel size |
Models with 57mm high digits: 288mm wide x 120mm high.
Models with 102mm high digits: 480mm wide x 168mm high.
Models with 144mm high digits: 624mm wide x 192mm high.
Models with 200mm high digits: 824mm wide x 248mm high.
Models with 280mm high digits: 1172mm wide x 336mm high.
|
Panel cutout (If panel mounting) |
Models with 57mm high digits: 279mm wide x 111mm high.
Models with 102mm high digits: 471mm wide x 159mm high.
Models with 144mm high digits: 615mm wide x 183mm high.
Models with 200mm high digits: 815mm wide x 239mm high.
Models with 280mm high digits: 1163mm wide x 327mm high.
|
Case depth |
90mm |
Sealing |
IP65 as standard for models with digit height 57mm, 102mm and 144mm. Others IP54. Optional weather cowl for outdoor mounting. |
Working Temperature |
0 to 50 degrees C |
Working humidity |
5 to 100% rh. Condensing humidity OK for 57mm, 102mm and 144mm versions. |