A comprehensive selection of load cells with capacities ranging from 0-25 grams to 0-3000 Tonnes using tension, compression, in-line, S beam, column and pancake type load cells. Load cells in this section are suitable for a variety of applications including: weighing of silos, vessels, tanks and conveyors; crane safety monitoring; fatigue testing; R&D testing; quality control; industrial weighing scales; weigh platforms; Weighbridges; Underhook scales; tensile testing machines; and dynamometers. Versions are also available for the marine sector with waterproof, submersible or sea water load cells, plus options are available on most ATEX approved units.
DBB S Beam - Bi-directional Load Cell
The DBB series of loadcells are an S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 50Kgf up to 10,000Kgf with a standard 2mV/V output and accuracy of 0.03%. The smaller DBBE is an encapsulated cell sealed to IP67. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output
Price range : £30.00 - £442.00
DBBSM S Beam - Bi-directional Load Cell
The DBBSM series of loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 30,000Kgf with a standard 2.7mV/V (2mV/V above 10,000Kgf) output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output.
Price range : £30.00 - £453.00
DBBSMM Series Miniature S Beam - Bi-directional Load Cell
The DBBSMM series of loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 50Kgf with a standard 2mV/V output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output.
Price range : £30.00 - £442.00
DBCR Low Range Miniature S Beam - Bi-directional Load Cell
The DBCR is a compact version of the classic S-beam load cell and ideal for small scale tension and compression applications. Load cells are available with a bi-directional range of 5N up to 500N with a standard 2mV/V ±0.1% output and accuracy of ±0.05% of the rated capacity.
Price range : £30.00 - £442.00
DDE Miniature Low Profile - Bi-directional Load Cell
The DDE series of load cells are an inline bi-directional load cell suitable for tension and compression applications with restricted mounting space. The DDE's small size and reduced weight, along with its low deflection results in a high stiffness assembly, makes this load cell suitable for rapid measurement changes and high frequency transients. Load cells are available with a bi-directional range of 100N up to 50kN with a standard 2mV/V output and accuracy of 0.3%. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output.
Price range : £30.00 - £453.00
DDEN Miniature Low Profile Submersible - Tension & Compression Load Cell
The DDEN series of load cells are an inline bi-directional load cell suitable for tension and compression applications in areas likely to be submerged. The DDENA version is fitted with an integral amplifier and can incorporate any of the ICA series amplifiers, or DCELL RS485 signal digitisers.
Price range : £30.00 - £483.00
DBCL In-Line - Bi-directional Load Cell
Ranges 1 tonne to 300 tonnes, output 1.5mV/V, accuracy 0.20%, sealed to IP66 (IP67 & IP68 submersible optional)
Price range : £30.00 - £973.00
DSCRC Series - Pancake/Low Profile - Bi-Directional Load Cell
The DSCRC load cell is a pancake load cell designed for weighing and force measurement applications and can operate in both tension and compression. The DSCRC load cells are ideal for material and component fatigue testing applications. Range is 0-2,000N, higher ranges are available from the DSCC series load cells. Standard output is mV/V, but options are available for inline amplifiers for standard 4-20mA or voltage outputs.
Price range : £30.00 - £1,176.00
DSCC Series - Pancake/Low Profile - Bi-directional Load Cell
The DSCC load cells are pancake load cells designed for weighing and force measurement applications and can operate in both tension and compression. The DSCC load cells are ideal for material and component fatigue testing applications. Ranges available from 0-5kN up to 0-1000kN, lower ranges are available from the DSCRC series load cells. Standard output is mV/V, but options are available for inline amplifiers for standard 4-20mA or voltage outputs.
Price range : £30.00 - £632.00
CCDDT Column Type Compression Dome Top Load Cell
The CCDDT load cells are dome top column load cells designed for the measurement of compressive forces. The CCDDT can be used for applications including hydraulic press calibration, pile force measurement, jack force measurement, centre of gravity measurement systems and structural proof testing. Ranges 2 to 1,000 tonnes. Standard output is 1.5mV/V with an accuracy of ±0.25% and options for inline amplifiers for standard 4-20mA or voltage outputs.
Price range : £30.00 - £786.00
6-8 Weeks
+44 (0) 1382 443000
+44 (0) 845 9000 602
[email protected]
