Surface Mount and Pipe Mount Temperature Sensors

Self-adhesive surface mounted silicon rubber patch RTD PT100 Class A sensor with flexible lead. The sensors include a foil backing for a faster response time and suitable for flat or curved surfaces. Temperature Range -30 to +150°C

K Type Thermocouple, surface mount with 2 metres stainless steel overbraided cable, max temperature 350°C.

Clamp on temperature sensors, PT100 and J, K, T type thermocouples. U bolt and flat surface mount type for temperature measurement on pipes, round and flat surfaces.

K type thermocouples with jubilee clip style pipe mounting and 2 metres of stainless steel overbraided cable, with grounded junction for fast response. Max temperature 350°C

The TT-C range of temperature sensors are used on pipe work system to detect liquid temperature where fitting an immersion sensor is not practical. Units are available with a various different temperature sensor in a die-cast Zinc probe with two metres of PTFE cable as standard connecting the probe to an IP65 housing for termination. Sensor options include various thermistors and RTDs, including PT100 and PT1000's. Unit are also available with an active output. TT-C-CVO units require a nominal 24vDC power supply and will provide an active 0-10V or 4-20mA output option with 2 pre-set temperature ranges (selectable via jumpers). A customised third pre-set temperature range is available on the TT-C-CVO-C unit. This unit replaces the previous generation TT-351-CVO.

TxBlock and TxRail are fully programmable temperature transmitters dedicated to PT100 and thermocouple industrial sensors with configurable working ranges. The TxBlock is a head mount unit and provides a 4-20mA outputs, the TxRail is a DIN rail mount unit and there are options for a 4-20mA and 0-10V outputs. Both units can be easily configured by the user using the TxConfig software and USB lead. The TxRail units also accept, 0-50mV, 0-10v and 0-20mA input signals.

TxIsoBlock and TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. TxIsoBlock is a head mount unit and TxIsoRail is a DIN rail mount unit. Both units can be easily configured by the user for input type and working range by means of an interface cable connected to a PC by a RS-232 or USB port. The TxIsoRail units also accept, 0-50mV, 0-10v and 4-20mA input signals and can be used as signal amplifiers / isolators.