Omni Instruments
contact icon+44 (0) 1382 443000
+44 (0) 845 9000 601
WE ARE HERE TO HELP

Contact our technical sales team now to discuss your requirements

help icon
MY BASKET basket arrow

£0.00

My Cart

You have no items in your shopping cart.

Click basket to edit.

Products

Latest added news blog
MSR175 Shock Transportation Data Logger
Kenny Laidlaw
Oct 01,2018
The MSR175 shock transportation data logger is the newest miniature logger from MSR.  The MSR175 ut...read more >
MaxiMet GMX400 Weather Station
  • MaxiMet GMX400 Weather Station

GMX400 Weather Station for Temp, RH, Pressure & Precipitation

Quick Overview

The MaxiMet GMX400 is a combined instrument mounted inside three double louvered, naturally aspirated radiation shields for the measurement of ambient temperature, humidity and pressure, and precipitation, with no moving parts. The results are high performance across each measurement over long periods of time.The data is output in serial formats - RS232, RS485. SDI12, NMEA and MODBUS.
View Options

Details

GMX400 Dimensions

Temperature & Relative Humidity

  • Air Temperature and Relative Humidity
  • Calculated Dew Point and Absolute Humidity
  • Wet Bulb Temperature (When Temperature <-20 and <50°C, 5-99%RH)


Barometric Pressure

  • Barometric Pressure
  • Pressure at Sea Level
  • Pressure at Station
  • Air Density


Rainfall

  • Integrated Optical Rain Sensor
  • Precipitation Total
  • Precipitation Intensity
  • Precipitation Status
  • Readings for General Indication Only.


Inclinometer/Compass

  • Compass Reading (0-359° Magnetic North)
  • X -Tilt. +ve East, -ve West
  • Y -Tilt. +ve North, -ve South
  • Z Orientation, +1 Normal Upright, -1 Inverted Position
  • X & Y Can Provide 2 Decimal Points for Easy Installation.


Additional Parameters

  • Supply Voltage
  • System Status
  • System Time and Date
  • Custom User Information (up to 16 character)


Parameter Specifications

Parameter Range Resolution Accuracy Units of Measure
Compass 0-360° ±3° Degrees
Temperature -40 to +70°C 0.1°C ±0.3°C °C, F or °K
Humidity 0-100%RH 1%RH Typically ±2%RH %RH, g/m²
Dew Point -40 to +70°C 0.1°C   °C, F or °K
Pressure 300-1,250hPa 1hPa ±0.4hPa (Absolute)
±0.8hPa (Relative)
hPa, mBar, mmHg, InHg
Rainfall 0 to 150mm/Hr 0.08mm/tip   mm or Inch


GMX400 Specifications

Output Rate: 1Hz, 1 reading per minute, 1 Reading per hour, or Polled Mode
Digital Comms: RS232, RS485, RS422, SDI-12, NMEA, Modbus, ASCII
Power Supply: 5-30vDC
Consumption @ 12vDC: 45mA
IP Rating: IP66
Operational Temperature Range: -35 to +70°C
CE Marking: Yes
Dimensions: 195 x 142 x 142mm
Weight: 0.5Kg
Origin: UK
Warranty: 24 Months

Availability: Stock Item

 

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF DESCRIPTION DOWNLOADS PRICE ORDER ITEM
 
GMX400 Compact Weather Station
1957-0400-00-000
1957-0400-00-000

MaxiMet GMX400 Compact Weather Station. Measured Parameters: Air Temperature, Relative Humidity, Barometric Pressure and Rainfall. Derived Parameters: Dew Point, Wet Bulb Temperature, Heat Index, Absolute Humidity, Air Density, Pressure at Sea Level, Total Rainfall and Rainfall Intensity. Outputs: RS232, RS422, RS485 (ASCII), SDI-12, NMEA, Modbus. Power Supply: 5-30vDC (Consumption 45mA @ 12vDC).

View FileData Sheet
   Size: (337.01 KB)
£1,309.00
or call us for a quote
 
MaxiMet Configuration Cable
1957-10-065
1957-10-065
1.8m RS232 to USB Configuration Cable for the Maximet Weather Stations. Configuration cable provides 5V power to the Maximet and allows for the 9-way Maximet connector to connect to a PC for the initial set up and configuration. GMX should be in Safe Mode to allow for configuration and the adaptor cable is not weatherproof and should not be used one units are installed on site.
£117.00
or call us for a quote
 
Mounting Bracket
1771-PK-115
1771-PK-115
Anodized Aluminium Bracket for mounting to pole and wall. Includes an aluminium sensor adaptor for WindSonic or MaxiMet, fully anodised to reduce corrosion. The Bracket uses a mounting clamp suitable for attaching to a vertical pipe with a diameter of 30-58mm. When mounting the MaxiMet, consider the position, orientation and alignment of the unit. Mount at the top of a pipe to ensure a clear unobstructed measurement view. Kit includes stainless steel mounting bolts, multiple earth points and wall / pole mounting kit
View FileDatasheet
   Size: (887.85 KB)
£259.00
or call us for a quote
 
Portable Tripod
M-TPB
M-TPB
Weather station tripod mounting kit with 2m pole. The legs on this tripod are not adjustable for uneven surfaces and ground should be levelled prior to installation. ¼" stake kit (M-SKB), ½" Stake kit (M-SKA), Guy wire kit (M-GWA) and Grounding kit (M-GKA) are available separately.
£155.82
or call us for a quote
 
Tripod Accessories
WINDSONIC-MOUNT
WINDSONIC-MOUNT
Mounting adaptor for connecting the WindSonic wind sensors or MaxiMet compact weather stations to the M-TPB tripod. Provides a direct mounting to the top of the tripod for an unobstructed placement of the mounted sensors. Ideal for solar radiation, wind and rain sensors.
£41.50
or call us for a quote
WINDSONIC-MASTBASE

Mounting adaptor to protect the cable of the WindSonic wind sensors or MaxiMet compact weather stations as it exits the bottom of the M-TPB tripod.

£41.50
or call us for a quote
M-GWA
Guy Wire Kit for the M-TPA or M-TPB tripods. Can be secured to Stakes spaced around the 2m tripod at a distance of 3 or 4 m, or to the tripod legs of the 3m tripod. This helps secure the tripod in place and reduces any movement due to wind.
£114.16
or call us for a quote
M-SKA
Stake Kit for the M-TPB tripod. Allows the Guy Wires to be secured to Stakes spaced evenly around the tripod at a distanced of 3 to 4m. Stake Kit includes 3 x ½" Stakes and S-Hooks.
£70.81
or call us for a quote
 
Accessories
1405-PK-069
Spare 9 way mating connector. Suitable for all WindSonic plastic versions, WindSonic M Non-Analogue and MaxiMet sensor and weather stations.
£57.00
or call us for a quote
WINDSONIC-CAB
Cable assembly to connect Windsonic or MaxiMet unit to external data logger or display. Includes inline multipole connector for WindSonic or MaxiMet and flying leads, cable length 6.5 metres. Other lengths available on request.
£63.00
or call us for a quote