Subsea Sensors

Products

Latest added news blog

Kenny Laidlaw

May 21,2019

The FRIGGA A90 is a disposable USB cold chain data logger suitable for monitoring temperature and lo...read more >

Subsea sensors for pressure and flow. Pressure sensors gauge, absolute and differential with ranges up to 1360 bar, rated to 4000 metres immersion. Subsea turbine meters for chemical, oil and water flow, sizes 1/2" to 6", rated to 4000 metres immersion.

PA33X and PA33XX Subsea Pressure Transmitter

Subsea pressure transmitters, ranges up to 1360 Bar absolute or sealed gauge (PA33X) or with external case pressure up to 400 bar. Fitted with Sub Con connectors. Suitable for seawater applications. Series 33 units are digitally compensated with a total error band of 0.1% for 0-10V, 0-5V or 4-20mA Output. Also special high precision unit available with RS485 Output with 0.01% accuracy (PA33XX).

Price range : £996.02 - £996.97

PD33-39X Subsea Pressure Transmitter

Subsea differential pressure transmitters, ranges up to 600 bar differential with external case pressure up to 1400 bar. Fitted with Sub Con connectors. Suitable for seawater applications. Series 33 units are digitally compensated with a total error band of 0.1% for 0-10v, 0-5v or 4-20mA O/P. Also special high precision unit available with RS485 O/P with 0.01% accuracy.

Price range : £1,485.00 - £1,485.00

Subsea Stainless Steel Turbine Flow Meters

Subsea stainless steel turbine flow meters for liquids, pipe sizes 1/4" to 6" with BSP threaded end connections or ANSI flanges, operating pressures up to 5,000 PSI, 350 bar. Flow ranges from 0.5 - 5ltrs/min to 1000 - 10000ltrs/min. Options: Eexia, digital indicators, subsea operation, high operating temperature up to 400°C

Price range : £1,143.00 - £1,143.00

NS500 Low Flow Pelton Wheel Flow Meter

The NS500 is a turbine flowmeter operating on the Pelton wheel principle allowing the flowmeter to be used for low flow rate applications on low viscosity fluids. Flowmeters are available with flanged or BSP couplings for high pressure hydraulic work. Flow ranges from 0.18 - 1.8 ltrs/min to 1.3 - 6.5 ltrs/min.

Price range : £621.00 - £929.00

Subsea Temperature Sensor

External subsea temperature sensor fitted in a 316 stainless steel housing suitable for depths to 4000 metres. Measurement range programmable between 0 and 200 C. Supplied with 2 wire 4-20mA or three wire 1-5v Dc output. Accuracy 0.2% FSD. Fitted with subcon or CRE connector.

Price range : £0.00 - £779.96

Tinytag Aquatic Underwater Temperature Loggers

Designed for long term immersion, these unit are waterproof to a depth of 500m making it ideal for environmental monitoring in rivers and seas. The Aquatic 2 comes in a high visibility yellow case has an attachment point that can be used to secure the logger in position. The Aquatic unit can store up to 32,000 readings.

Price range : £5.00 - £105.00

STALC SS Series Submersible Loadcell

The STALCSS Series loadcell is a pressure compensated tension and compression loadcell suitable for use at up to 6,400m depth. Actual design and cable connections vary depending on depth and specific requirements.

Price range : £2,850.00 - £2,850.00

Subsea Pressure Indicator

This system comprises of a LEO 2 digital pressure gauge, built into a clear perspex pressure housing suitable for immersion to 1000 metres of seawater. LEO 2 units are available with ranges from -1 to +3 bar, up to 0-700 bar, with a total error band of 0.1%.

Price range : £10.00 - £2,456.65

DMS600 Series 63mm Subsea Pressure Gauges for up to 1,200m

The DMS600 series are bourdon tube style pressure gauges suitable for subsea installation up to 1200m. The case of this gauge is machined from a solid stainless steel block and is capable of withstanding an external pressure of 120 bar. The bourdon tube design is suitable for all gaseous and liquid media that are not highly viscous and that will not solidify, crystallize, attack or corrode 316 Stainless Steel.

Price range : £363.13 - £363.13

DMS600 Series 100mm Subsea Pressure Gauges for up to 900m

The DMS600 series are bourdon tube style pressure gauges suitable for subsea installation up to 900m. The case of this gauge is machined from a solid stainless steel block and is capable of withstanding an external pressure of 90 bar. The bourdon tube design is suitable for all gaseous and liquid media that are not highly viscous and that will not solidify, crystallize, attack or corrode 316 Stainless Steel.

Price range : £725.00 - £725.00