Data Logger Hire

The GL220 is the next generation midi logger following on from the success of the GL200 & GL200A models. With 10 fully isolated multi-function inputs, large internal 2GB Flash memory and a port for an external USB stick memory, this logger has significantly more memory than it predecessors. The USB memory stick can also be exchanged during logging without any lost of data.

The Datataker DT82I smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT82I is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The Datataker DT82Is Dual Channel concept allows up to 4 isolated or 6 common referenced analog inputs to be used in many combinations. With support for Modbus sensors and SCADA systems, FTP and Web interface and switchable 12V and 5V regulated outputs to power sensors, the DT82I is a totally self contained solution and supplied in a portable pelicase with waterproof Hirschmann bulkheads for connecting sensors, UK power supply and a 7Ah battery.

The dataTaker DT82E is a smart data logger designed especially for environmental monitoring. The DT82E is a robust, low power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display.

The Datataker DT80 series stand alone data logger, can be mains or battery powered, with 5-15 analogue inputs ( universal input type ), 12 digital I/O, CAN bus serial input, USB memory up to 512 MB ( 50 million readings ), Logging rates 25 Hz to 99 days. Unit has an internal memory of 5,000,000 readings. DT80 can also publish data directly to the web.

Datataker DT85 series stand alone data logger, mains or battery powered, with 16-48 analogue inputs ( universal input type ), 12 digital I/O, MODbus and SDI-12 serial input, USB memory up to 512 MB ( 50 million readings ), Logging rates 25 Hz to 99 days. Unit has an internal memory of 5,000,000 readings. Serial, USB and ethernet connection, with web server.

This highly versatile logger is suitable for a wide range of data logging applications and comes with powerful, user friendly Windows software. Real time and downloaded data can be viewed in graph and table format and be exported to Excel. The DT800 supports the following input types, RTD, Thermocouple, 4-20mA, millivolt, voltage, frequency, thermistor, strain gauge, resistance, pulse, Rs232 and digital. The DT800 has 8 digital outputs.

The Squirrel 2010 is a versatile, general purpose logger, with 4 to 8 analogue input channels to measure current, voltage, resistance and temperature (thermocouples), plus 8 digital channels and two counter inputs. The loggers Internal 1.8 million reading memory and long battery life make this an ideal unit for remote logging where mains power is not available and large amounts of reading need to be stored.

The SQ2040-2F16 is a portable handheld data logger with up to 32 analogue inputs suitable for voltage, current or resistance inputs. The unit can also accept thermistor, thermocouples and RTD temperature measurements, plus 4 Pulse and 8 digital state inputs. 1.8 million readings internal memory with an option for expansion using an MMC memory card. Power Supply options of 6 x AA batteries or an external 10-18vDC supply.

The Tinytag Energy Logger Hire Unit can be used to monitor single and three phase energy supplies and is very simple and easy to use portable energy logger. Current measurements are taken using flexible non-invasive coils and the voltage readings are collected from the connected UK mains supply for quick and easy installation. The unit provides 6 weeks continuous logging at 5 minute intervals. The hire unit is supplied with a carry case, three current coils, UK mains leads, a USB cable, a copy of the Tinytag Explorer software and a user manual.