Products

Latest added news blog

MSR175 Shock Transportation Data Logger

Kenny Laidlaw

Oct 01,2018

The MSR175 shock transportation data logger is the newest miniature logger from MSR. The MSR175 ut...read more >

VIEW ALL OUR LATEST NEWS

previous product 1/5 next product

3100 Slim Series of 6mm Temperature Transmitters

Quick Overview

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and thermocouples into a HART system. All units are ATEX approved for Zone 2 environments, including the power rail and power control units.

Hazardous Area Approved

View Options

Details

Applications

The 3100 series is ideal for the conversion and/or isolation of inputs from K & J Type Thermocouples plus 2-, 3- or 4-wire PT100 temperature sensors into 4-20mA outputs. All units are suitable for installation in Hazardous Zone 2 areas, including power rails and control units.

Features

Rational DIP-switch setting
Signal conditioning which ensures that no re-calibration is required after DIP-switch programming.
3113 unit provide a 4-20mA output with an embedded HART 7 protocol
Reliable watchdogs LED indicates an error in the setup, hardware or power supply.
Unique protection against wiring errors
Effective isolation to EN 61010-1 and EN 61140
Easy mounting / dismounting
Space-saving design. At only 6 mm wide and can be mounted next to
each other, permitting up to 330 channels per metre.
Flexible supply voltage 24 VDC ±30%.
The devices are vibration-tested via DNV and GL approvals and can be retained on the rail with the 9403 module stop.
9400 Power Rail and 3405 Power Connector unit will provide power to up to 100 units with up to 2.5A.
3405 Power Connector unit can provide a power supply to sensors from the Power Rail.
All units are suitable for ATEX Zone 2 Environments

Specifications

Product Code	Description	Input	Output	Program Using
3101	TC Converter	K & J Type Thermocouples	mA or V	DIP-Switches
3102	PT100 Converter	2-, 3-, or 4-wire PT100	mA or V	DIP-Switches
3111	TC Converter/Isolator	K & J Type Thermocouples	Isolated mA or V	DIP-Switches
3112	PT100 Converter/Isolator	2-, 3-, or 4-wire PT100	Isolated mA or V	DIP-Switches
3113	HART Temperature Converter	2-, 3-, or 4-wire PT100, K & J Type Thermocouples	Isolated Active 4-20mA with HART 7 Protocol	DIP-Switches, plus HART 7 revision protocol for extended programming

Power Supply Options

The 3100 Slim Series units can be supplied in various different ways:-

One unit can be connected to suitable 24vDC ±30% power supply and then looped to up to 130 additional units, max 2.5A.
One unit can be connected to a suitable 24vDC ±30% power supply and mounted on to the 9400 Power Rail to distribute power to up to 20 units, max 0.4A
The 3405 Power Connector Unit can be connected to a suitable 24vDC ±30% power supply and then to the 9400 Power Rail to distributor power to up to 100 units, max 2.5A.
The 9410 Power Connector Unit can be connected to a suitable 24vDC ±30% power supply (plus a secondary back-up power supply) and then to the 9400 Power Rail to distributor power to up to 200 units, max 4A.
Loop-powered units are powered directly from the 4-20mA signal.

All devices are ATEX Approved and can safely be used in a safe area, or in ATEX Zone 2 environments.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM

PR 3101 Thermocouple Temperature Converter
3101	3101 Slim Series Thermocouple Temperature Converter suitable for use in ATEX Zone 2 Environments. Conversion of J & K Type Thermocouple temperature sensor input signal to a 0(2)-10V, 0(1)-5V or 0(4)-20mA output signals. Response time: less than 30ms (300ms when signal dampening), Accuracy better than ±0.1% of span. Power Supply: 24vDC ±30%. 6mm Slimline housing. Units are DIP-switch configured.	Data Sheet Size: (228.6 KB)	£100.23	or call us for a quote

PR 3102 PT100 Temperature Converter
3102	3102 Slim Series PT100 Temperature Converter suitable for use in ATEX Zone 2 Environments. Conversion of 2-, 3- or 4- wire PT100 temperature sensor input signal to a 0(2)-10V, 0(1)-5V or 0(4)-20mA output signals. Response time: less than 30ms (300ms when signal dampening), Accuracy better than ±0.1% of span. Power Supply: 24vDC ±30%. 6mm Slimline housing. Units are DIP-switch configured.	Data Sheet Size: (825.82 KB)	£94.00	or call us for a quote

3100 Slim Series - Isolated Temperature Converters
3111	3111 Slim Series Isolated Thermocouple Converter suitable for conversion of K and J Type Thermocouple input to a 0/4-20mA, 0/1-5V or 0/2-10V output signal. Response time: less than 30ms or 300ms, Accuracy better than 0.05% of selected range, or 0.5 C. Power Supply: 24vDC +/-30%. 6mm Slimline housing. Units are programmable via DIP Switches. Suitable for use in ATEX Zone 2 Environments.		£131.88	or call us for a quote
3111-N	3111 Slim Series Isolated Thermocouple Converter suitable for conversion of K and J Type Thermocouple input to a 0/4-20mA, 0/1-5V or 0/2-10V output signal. Response time: less than 30ms or 300ms, Accuracy better than 0.05% of selected range, or 0.5°C. Power Supply: 24vDC ±30%, via terminals only. 6mm Slimline housing. Units are programmable via DIP Switches. Suitable for use in ATEX Zone 2 Environments.		£131.88	or call us for a quote
3112	3112 Slim Series Isolated PT100 Converter suitable for conversion of 2-, 3- or 4-wire PT100 input to a 0/4-20mA, 0/1-5V or 0/2-10V output signal. Response time: less than 30ms or 300ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. Units are programmable via DIP Switches. Suitable for use in ATEX Zone 2 Environments.		£123.43	or call us for a quote
3112-N	3112 Slim Series Isolated PT100 Converter suitable for conversion of 2-, 3- or 4-wire PT100 input to a 0/4-20mA, 0/1-5V or 0/2-10V output signal. Response time: less than 30ms or 300ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via terminals only. 6mm Slimline housing. Units are programmable via DIP Switches. Suitable for use in ATEX Zone 2 Environments.		£123.43	or call us for a quote
3113	3113 Slim Series Isolated HART Temperature Converter suitable for conversion of K and J Type Thermocouple or PT100 input to an isolated active 4-20mA or 20-4mA output signal. Response time: 60ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. Units are programmable via DIP Switches and HART 7 Revision protocol. Suitable for use in ATEX Zone 2 Environments.		£200.45	or call us for a quote
3113-N	3113 Slim Series Isolated HART Temperature Converter suitable for conversion of K and J Type Thermocouple or PT100 input to an isolated active 4-20mA or 20-4mA output signal. Response time: 60ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via terminals only. 6mm Slimline housing. Units are programmable via DIP Switches and HART 7 Revision protocol. Suitable for use in ATEX Zone 2 Environments.		£200.45	or call us for a quote

Slim Series Power Control Units
3405	The 3405 Power Connector Unit is an ATEX approved power supply for use with the 9400 Power Rail. The Power Connector can supply up to 100 units and supply up to 2.5A. The Power Connector can be used to provide power to the Power Rail from the supply terminals, or to supply power via the supply terminals from the Power Rail. Unit can be mounted in an ATEX Zone 2 environment.	Data Sheet Size: (328.36 KB)	£71.74	or call us for a quote

Power Rail & Accessories
9400A	9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 1m (±2mm) lengths and can be cut to size and fitted with additional end covers.		£98.11	or call us for a quote
9402	Additonal end covers for 9400 Power Rail. Kit includes a pair of end covers for a 9400 Power Rail.		£4.22	or call us for a quote
9404	Module Stop for 9400 Power Rail. Provides support and secure mounted devices to power rail.		£6.33	or call us for a quote

Slim Series Power Control Units
9410	The 9410 Power Connector Unit distributes a 24vDC supply voltage to the 9400 Power Rail. The Power Connector can supply up to 200 units and supply up to 4A. The unit has the option of a secondary back-up power supply to ensure supply and is suitable for use in a ATEX Zone 2 environment.	Data Sheet Size: (558.97 KB)	£163.53	or call us for a quote