Products

Latest added news blog

MSR175 Shock Transportation Data Logger

Kenny Laidlaw

Oct 01,2018

The MSR175 shock transportation data logger is the newest miniature logger from MSR. The MSR175 ut...read more >

VIEW ALL OUR LATEST NEWS

previous product 5/14 next product

SMP6 Smart Pyranometer

Quick Overview

The SMP6 Pyranometer is a Class B pyranometer with industry standard digital and analogue amplified outputs. The SMP6 is identical to the CMP6 pyranometer but includes an RS485 Modbus RTU interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The SMP6 has a dual-dome construction with high quality glass and an increased thermal mass covering a spectral range of 285 to 2800nm. This unit is ideal for high quality solar radiation monitoring for site prospecting or technology research for solar energy applications. It is also particularly suitable for upgrading meteorological networks and for use in sun tracker based solar monitoring stations.

View Options

Details

The Smart Pyranometer SMP6 is a more sophisticated detector than the SMP3 pyranometer and has a dual-dome construction with high quality glass and an increased thermal mass. There are two high quality concentric glass domes, 2mm thick, which provide improved directional error and thermal isolation. The glass also provide better transmission of Ultraviolet radiation than the glass of the SMP3.

The SMP6 come with a 0-1V or 4-20mA analogue output and these can be rescaled by the user with the supplied PC software. The units are configured with the 0-1V output set as -200 to 2,000Wm² and the 4-20mA output as a 0-1,600Wm². Negative ranges are provided to allow the sensor to show levels at night when there is heat emitted from the sensor.

All SMP's have the RS485 Modbus RTU interface, very low power requirements and are supplied with comprehensive, traceable, calibration certificates. Calibrations are traceable to the World Radiometric Reference (WRR) in Davos Switzerland and are performed in accordance with ISO 9847, Annex A.3 'Calibration of Field Pyranometers by comparison to a Reference Pyranometer and are supplied with comprehensive, traceable, calibration certificates.

Specification

ISO 9060:2018 Classification:	Spectrally Flat Class B
Spectral Range:	285 to 2800nm
Response Time:	<12s
Zero Offset A:	<8 W/m²
Directional Error (Up to 80º with 1000 W/m² beam):	<15 W/m²
Temperature Dependence of Sensitivity:	<2% (-10 to 40°C) <4% (-40 to 70°C)
Analogue Output:	-V version: 0-1V -A version: 4-20mA
Analogue Output Range:	-V version: -200 to 2000W/m² -A version: 0 to 1600W/m²
Digital Output:	2 wire RS485 Modbus RTU
Digital Output Range:	-400 to 2000W/m²
Operating Temperature:	-40 to +80°C
Supply Voltage:	5 to 30vDC
Power Consumption (at 12vDC):	-V version: 55mW -A version: 100mW
Ingress Protection:	IP67

SMP 6 instruments have an 8-pin socket and can be connected to a standard cable with a pre-wired waterproof 8 pin plug and flying leads. Cable lengths of 10m, 25m, 50m and 100m are available.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM

SMP6-V Smart Pyranometer with 0-1vDC output
0374920-100	SMP 6 Smart Pyranometer with 0-1vDC output. Two, 2mm thick, high quality concentric domes. Integrated levelling. Sun shield. Spectral range 285-2800nm, response time less than 12 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2 wire RS485 Modbus and 0-1V output. Analogue output range -200 to 2,000Wm², Digital output range -400 to 2,000Wm². Power Supply 5 to 30vDC. Supplied with no plug or cable.	Datasheet Size: (387.46 KB)	£1,667.00	or call us for a quote
0374920-102	SMP 6 Smart Pyranometer with 0-1vDC output. Two, 2mm thick, high quality concentric domes. Integrated levelling. Sun shield. Spectral range 285-2800nm, response time less than 12 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2 wire RS485 Modbus and 0-1V output. Analogue output range -200 to 2,000Wm², Digital output range -400 to 2,000Wm². Power Supply 5 to 30vDC. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.		£1,780.00	or call us for a quote

SMP6-A Smart Pyranometer with 4-20mA output
0374920-200	SMP 6 Smart Pyranometer with 4-20mA output. Two, 2mm thick, high quality concentric domes. Integrated levelling. Sun shield. Spectral range 285-2800nm, response time less than 12 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2 wire RS485 Modbus and 4-20mA output. Analogue output range 0 to 1,600Wm², Digital output range -400 to 2,000Wm². Supplied with no plug or cable.		£1,667.00	or call us for a quote
0374920-202	SMP 6 Smart Pyranometer with 4-20mA output. Two, 2mm thick, high quality concentric domes. Integrated levelling. Sun shield. Spectral range 285-2800nm, response time less than 12 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2 wire RS485 Modbus and 4-20mA output. Analogue output range 0 to 1,600Wm², Digital output range -400 to 2,000Wm². Power Supply 5 to 30vDC. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.		£1,780.00	or call us for a quote

Connection Options for SMP, SGR, SUV, CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3
2523146	Waterproof 8-pin plug connector for the following Kipp & Zonen equipment. SMP Pyranometers, SGR Pyrgeometers, SUV Radiometers, CMP Pyranometers with PT100 output, CGR3 and CGR4 with PT100 output, CHP1, CNR4, UVS Radiometers and CSD3 Sunshine Duration Sensors.		£49.00	or call us for a quote
0362621	Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£173.33	or call us for a quote
0362623	Waterproof 8-pin plug connector with 25m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£331.99	or call us for a quote
0362624	Waterproof 8-pin plug connector with 50m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£589.32	or call us for a quote
0362625	Waterproof 8-pin plug connector with 100m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£1,131.97	or call us for a quote

CVF 4 Ventilation Unit
0378900-000	CVF 4 Ventilation unit designed to provide clean air-flow over the dome or window to minimise the formation of dew and reduce the frequency of dome cleaning. Replaceable fan inlet filter. Power Supply 8-13.5vDC (5W continuously at 12vDC, 5.5W with heater) Operating temperature range -40 to +70°C. Waterproof connector, supplied without plug or cable. Suitable for Kipp & Zonen CMP & SMP series pyranometers and CUV5 & UVS radiometers.		£1,211.00	or call us for a quote

Connection Options for CMP Pyranometers, CGR3 (10K), CGR4 (10K), CVF4 & CNF4 Ventiliation units.
2523145	Waterproof 4-pin plug connector for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units. Requires customers own cable wiring.		£42.00	or call us for a quote
0362611	Waterproof 4-pin plug connector with 10m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.		£156.00	or call us for a quote
0362613	Waterproof 4-pin plug connector with 25m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.		£322.66	or call us for a quote
0362614	Waterproof 4-pin plug connector with 50m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.		£581.32	or call us for a quote
0362615	Waterproof 4-pin plug connector with 100m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve for CMP Series Pyranometers and Pygeometers with 10K thermistor output.		£1,114.64	or call us for a quote