A comprehensive selection of load cells with capacities ranging from 0-25 grams to 0-3000 Tonnes using tension, compression, in-line, S beam, column and pancake type load cells. Load cells in this section are suitable for a variety of applications including: weighing of silos, vessels, tanks and conveyors; crane safety monitoring; fatigue testing; R&D testing; quality control; industrial weighing scales; weigh platforms; Weighbridges; Underhook scales; tensile testing machines; and dynamometers. Versions are also available for the marine sector with waterproof, submersible or sea water load cells, plus options are available on most ATEX approved units.
CBES Low Profile - Compression Load Cell
The CBES load cell is a low profile load cell designed for the measurement of compressive forces. The CBES is equally suited for both force measurement and weighing applications alike. The compact design allows the cell to be fitted into the smallest of spaces can be retrofitted in weighing systems, the low height gives an added benefit in that it does not increase the headroom required for vessels and is simple to install. Ranges 50 to 50,000Kg. Standard output is 2mV/V with an accuracy of ±0.15% and options for inline amplifiers for standard 4-20mA or voltage outputs.
Price range : £30.00 - £368.00
CDF Miniature Low Profile - Compression Load Cell
The CDF subminiature button load cell is designed for compression measurement applications. Measuring just 15mm in diameter and 8mm in overall height, the CDF is one of the smallest standard button load cell that we offer. If you need to measure lower or higher forces, the CDFM3 miniature button load cell is available in capacities from 0-100N right up 0-20kN and is slightly larger at 30mm diameter and 12mm in height. The CDF subminiature button load cell is ideal for retro-fitment into industrial machines and process systems for monitoring and control purposes, or for incorporation into new machine designs. Ranges 100 to 20kN. Standard output is 2mV/V with options for inline amplifiers for standard 4-20mA or voltage outputs and handheld display for immediate readout.
Price range : £0.00 - £348.00
CDFM3 Miniature Low Profile - Compression Load Cell
The CDFM3 miniature button load cell is designed for compression measurement applications. Measuring 30mm in diameter and 12mm in overall height, the CDFM3 is one of the smalest compression load cell that we offer. If you need a smaller load cell, the CDF subminiature, or CDFT Micro button load cell are available in capacities from 0-500N right up 0-2kN and 10N to 250N respectively. The CDFM3 miniature button load cell is ideal for space limited monitoring with a wide load capacity. Ranges 100 to 20kN. Standard output is 2mV/V with options for inline amplifiers for standard 4-20mA or voltage outputs and handheld display for immediate readout.
Price range : £30.00 - £368.00
CDFT Micro Button Load Cell
The CDFT micro button load cell is designed for compression measurement where space is extremely limited. Measuring just 9mm in diameter and 2.9mm in overall height, the CDFT is the smallest compression load cell that we offer. Ranges 10N to 250N. Standard output is 0.5 o 2mV/V with options for inline amplifiers for standard 4-20mA or voltage outputs and handheld display for immediate readout.
Price range : £30.00 - £556.00
CCG Annular Force Washer - Compression Load Cell
The CCG load cell is an annular/force washer load cell designed for the measurement of compressive forces and they are suitable for use in a wide range of research and industrial applications. The CCG load cell is often used in electro-mechanical test rigs and other critical bolted installations for monitoring continuously, or periodically, the tension profile of bolts during their use in the installation. The CCG load cell can also be used in cable tension systems and would normally be positioned at the cable anchor point. Ranges 12.5 to 540kN. Standard output is 1.5mV/V with an accuracy of 1.5% and options for inline amplifiers for standard 4-20mA or voltage outputs.
Price range : £30.00 - £621.00
CCGBP Series - Brake Pedal Load Cell
The CCGBP load cell is a very low profile load cell designed for the measurement of brake pedal compressive forces. At just 12.5mm high, the CCGBP load cell is small enough to fit in the tightest spaces. The integral mounting and loading plate allows for fast and simple fitting directly onto the pedal, with customised mounting options available for any vehicle. Ranges 50 to 200Kg. Standard output is 2mV/V with options for inline amplifiers for standard 4-20mA or voltage outputs and handheld display for immediate readout.
Price range : £30.00 - £650.00
OBUG Single Point Platform Load Cell
The OBUG series of load cells are single point load cells designed for applications where the point of application of the load or force may vary. Single point load cells are primarily designed for the platform type weighing scales where applications are diverse, ranging from weighing a single diamond to loads of up to 40Kg. Other applications include low range tensile test machines, robotics and web tension measurement. OBUG load cells are available with a range of 0-250 grams up to 0-40Kg, OBUC & OBUH load cells cover ranges up to 750Kg. The load cells provide a 1.5-2mV/V output but can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output. ATEX versions are available.
| Hazardous Area Approved |
 |
Price range : £30.00 - £368.00
OBUC Single Point - Compression Load Cell
The OBUC series of loadcells are single point load cells designed for applications where the point of application of the load or force may vary. Single point load cells are primarily designed for the platform type weighing scales where applications are diverse, ranging from weighing a few Kg to heavy canisters of nitrogen gas. Other applications include low range tensile test machines, robotics and web tension measurement. Load cells are available with a range of 0-10Kg up to 0-200Kg and cover platforms measuring up to 400mm square using just a single load cell. The load cells provide a 2mV/V output but can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output. ATEX versions are available.
| Hazardous Area Approved |
|
Price range : £30.00 - £368.00
OBBS Bending Beam - Compression Load Cell
The OBBS Series of load cells are bending beam load cells designed for low capacity weighing applications, such as batching hoppers, low profile platforms and conveyor packing and weighing hoppers. Their IP68 environmental protection rating, polyurethane shielded cable and stainless steel construction makes it ideal for use in weighing applications such as food, pharmaceutical, brewing etc. Load cellls are available with vessel mounts for static applications and shock mounts where vibration and transient loads may occur in feed hopper and conveyor applications. Capacities available from 5Kg up to 500Kg with a 2mV/V output but can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output.
Price range : £30.00 - £520.00
OSBKT Single-Ended Shear Beam Load Cell
The OSBKT single-ended shear beam load cell are suitable for medium capacity weighing applications such as hoppers and vessels where a high accuracy measurement system is required. The high integrity IP67 body and alloy steel construction make it ideal for general purpose industrial weighing applications. Ranges 250kg to 2000kg. The load cells provide a 2mV/V output but can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output. ATEX versions are available.
| Hazardous Area Approved |
|
Price range : £30.00 - £406.00
+44 (0) 1382 443000
+44 (0) 845 9000 602
[email protected]
