The ToughSonic Remote is a remote water level sensor with a maximum range of 50 feet (15.2 meters).  This digital sensor is designed for accuracy and long-term durability in remote monitoring applications using solar power and GSM/GPRS, or even satellite communications for central monitoring of multiple sites.  The ToughSonic Remote sensors are housed in a marine grade stainless steel housing, with full epoxy potting and an IP68 rating, plus Senix Lightening Guard, with protection for electrical transients up to 7Kv on both power and communication circuits. The ToughSonic Remote is fully configurable using SenixView software, which allows adjustment of sensor parameters, viewing data with displays, charts and filtered or unfilterd data, analysis of data and maintenance of sensors.

All ToughSonic sensors use an ultrasonic sound waves to measure distances through air. This technology has distinct advantages over mechanical, optical and radar technologies. Ultrasonic sound waves are unaffected by ambient light, target colour, transparency or reflectivity and the target area can be much wider than optical sensor allowing small and large objects to be easily detected. The ultrasound waves are non-contact, which last longer and require less maintenance than contact sensors that are more prone to corrosion, scaling and coating.

Optimal Range	10 Feet (3m)	20 Feet (6.1m)	33 Feet (10m)
Max Range	14 Feet (4.3m)	30 Feet (9.1m)	50 Feet (15.2)
Mounting	30mm Threaded housing	1.5 inch NPT Thread top and bottom	UA-MB-S bracket or other body clamp
Outputs	Modbus RTU or simple ASCII protocol, 9600 to 115200 baud, 8 data bits, 1 stop, no parity
Electrical Connection	2m 4-core cable
Power Supply	10-30vDC, typical 24vDC
Housing	Marine grade 316 Stainless Steel, epoxy potted and sealed
Operating Environment	-40 to +70°C, 0-100% RH.
Protection	IP68, NEMA-4x, NEMA-6P

Omni Instruments can provide a complete remote monitoring system built to your own specific requirement for virtually any application and location. ToughSonic Remote sensors can be linked with GRD modems and our M2M website to allow a complete GSM/GPRS monitoring system that can be monitored remotely from anywhere in the world. Please contact us to discuss your requirements.