Temperature Transmitters

Wall-mounted room temperature transmitter. The unit comes complete with PT100 sensor and 4-20mA output transmitter via a 2-wire connection. Easily mounted and suitable for a temperature range 0-70C and a power supply 8-35vDC.

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and thermocouples into a HART system. All units are ATEX approved for Zone 2 environments, including the power rail and power control units.

Hazardous Area Approved

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART 7 protocol unit that allow for integrating PT100 and thermocouples into a HART system. HART 7 revision protocol allows for extended programming. All units are ATEX approved for Zone 2 environments.

Hazardous Area Approved

The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input.

Hazardous Area Approved

The 5331 is an extremely high accuracy sensor head mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt requires a 7.2 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions.

Hazardous Area Approved

The 5333 is an extremely high accuracy sensor head mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt requires a 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit has the option of intrinsically safe versions.

Hazardous Area Approved

The 5334 is an extremely high accuracy sensor head mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal can be linear to the value of the input value. The unt requires a 7.2 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions.

Hazardous Area Approved

The 5335 is an extremely high accuracy sensor head mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt requires a 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions.

Hazardous Area Approved

The 5337 is an extremely high accuracy sensor head mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The 5337 will also accept inputs from 2 RTD or TC sensors and provide a 4-20mA output with individual, difference or average temperature measurements. The unit requires an 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions.

Hazardous Area Approved

The 5343 is a sensor head mounting programmable transmitters suitable for Potentiometer, Thermistors or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the input. The unt requires a 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions, 5343B.

Hazardous Area Approved