Temperature Transmitters

Slim-line microprocessor based, fully isolated DIN rail mounted thermocouple transmitters for K, T and J type sensors. The body is a tiny 6.2mm thick - a huge space saving compared to most other DIN rail models. They can either be supplied factory ranged or alternatively ranged by the end user for specific applications by dip switches on the device. An optional bus adaptor is available enabling hot swapping and requiring only one power supply for multiple units. Respnse time 25mS. Power supply 19.2 - 30vDC. Outputs available 0-5V DC, 1-5V DC, 0-10V DC, 4-20mA.

Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant

Hazardous Area Approved

The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors and provide a 4-20mA output with individual, difference or average temperature measurements. The unit requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation.

Hazardous Area Approved

The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation.

Hazardous Area Approved

The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation.

Hazardous Area Approved

The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions.

Hazardous Area Approved

The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation.

Hazardous Area Approved

The 5343 is a sensor head mounting programmable transmitters suitable for Potentiometer, Thermistors or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the input. The unt requires a 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions, 5343B.

Hazardous Area Approved

The 5337 is an extremely high accuracy sensor head mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The 5337 will also accept inputs from 2 RTD or TC sensors and provide a 4-20mA output with individual, difference or average temperature measurements. The unit requires an 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions.

Hazardous Area Approved

The 5335 is an extremely high accuracy sensor head mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt requires a 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions.

Hazardous Area Approved