SMP3 Smart Pyranometer

Quick Overview

The SMP3 Pyranometer is a spectrally flat class C pyranometer with an amplified analogue and RS485 Modbus RTU output. The SMP3 is identical to the CMP3 pyranometer but includes a Modbus interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The amplified output options are 0-1V or 4-20mA and these are identically configured to allow for easy installation and exchange during recalibration. The SMP3 has a 4mm glass dome with a spectral range of 300 to 2800nm. The small size and sealed construction make this instrument perfect for monitoring solar energy installations, agriculture, horticulture, hydrological and industrial applications.

View Options

Details

The SMP3 is an entry level pyranometer with a completely sealed construction and non-replaceable drying cartridge. The SMP3 features a 64 junction thermopile sensing element with a highly absorptive, and spectrally flat black coating to capture incoming radiation and convert it to an electrical signal. This detector is protected from external influences by a high quality glass dome with is 4mm thick. However, the glass dome will require regularly cleaning to prevent a build-up of dirty, or salt spray in marine environments, which will obscure the sensor.

The SMP3 come with a 0-1V or 4-20mA analogue output and these can be rescaled by the user with the supplied PC software. The units are configured with the 0-1V output set as -200 to 2,000Wm² and the 4-20mA output as a 0-1,600Wm². Negative ranges are provided to allow the sensor to show levels at night when there is heat emitted from the sensor.

All SMP's have the RS485 Modbus RTU interface, very low power requirements and are supplied with comprehensive, traceable, calibration certificates. Calibrations are traceable to the World Radiometric Reference (WRR) in Davos Switzerland and are performed in accordance with ISO 9847, Annex A.3 'Calibration of Field Pyranometers by comparison to a Reference Pyranometer'.

Diagram

Specification

ISO 9060:2018 Classification	Spectrally Flat Class C
Spectral Range	300 to 2800nm
Response Time	<12s
Zero Offset A	<15 W/m²
Zero Offset B	<5 W/m²
Directional Error	<20 W/m² (Up to 80º with 1000 W/m² beam)
Temperature Dependence of Sensitivity	<3% (-20 to 50°C) <5% (-40 to 70°C)
Analogue Output	-V version: 0-1V -A version: 4-20mA
Analogue Output Range	-V version: -200 to 2000W/m² -A version: 0 to 1600W/m²
Digital Output	2 wire RS485 Modbus RTU
Digital Output Range	-400 to 2000W/m²
Operating Temperature	-40 to +80°C
Supply Voltage	5 to 30vDC
Power Consumption (at 12vDC)	-V version: 55mW -A version: 100mW
Ingress Protection	IP67

SMP3 instruments have an 8-pin socket and can be connected to a standard cable with a pre-wired waterproof 8 pin plug and flying leads. Cable lengths of 10m, 25m, 50m and 100m are available.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM

SMP 3 Smart Pyranometer with 0-1V output
0374900-100	SMP 3 Smart Pyranometer with 0-1vDC output. Single 4mm glass dome. Integrated leveling. Sun shield. Spectral range 300 - 2800nm, response time less than 12 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus and 0-1V output. Digital output range -200 to 2,000W/m². Analogue output range -200 to 2,000W/m². Power Supply 5 to 30vDC. Supplied with no plug or cable.	Datasheet Size: (446.72 KB)	£905.00	or call us for a quote
0374900-102	SMP 3 Smart Pyranometer with 0-1vDC output. Single 4mm glass dome. Integrated leveling. Sun shield. Spectral range 300 - 2800nm, response time less than 12 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus and 0-1V output. Digital output range -200 to 2,000W/m². Analogue output range -200 to 2,000W/m². Power Supply 5 to 30vDC. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.		£1,017.00	or call us for a quote

SMP 3 Smart Pyranometer with 4-20mA output
0374900-200	SMP 3 Smart Pyranometer with 4-20mA output. Single 4mm glass dome. Integrated leveling. Sun shield. Spectral range 300 - 2800nm, response time less than 12 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2 wire RS485 Modbus and 4-20mA output. Digital output range -200 to 2,000W/m². Analogue output range 0 to 1,600W/m². Power Supply 5 to 30vDC. Supplied with no plug or cable.		£905.00	or call us for a quote
0374900-202	SMP 3 Smart Pyranometer with 4-20mA output. Single 4mm glass dome. Integrated leveling. Sun shield. Spectral range 300 - 2800nm, response time less than 12 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2 wire RS485 Modbus and 4-20mA output. Digital output range -200 to 2,000W/m². Analogue output range 0 to 1,600W/m². Power Supply 5 to 30vDC. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.		£1,017.00	or call us for a quote

Connection Options for SMP, SGR, SUV, CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3
2523146	Waterproof 8-pin plug connector for the following Kipp & Zonen equipment. SMP Pyranometers, SGR Pyrgeometers, SUV Radiometers, CMP Pyranometers with PT100 output, CGR3 and CGR4 with PT100 output, CHP1, CNR4, UVS Radiometers and CSD3 Sunshine Duration Sensors.		£49.00	or call us for a quote
0362621	Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£173.33	or call us for a quote
0362623	Waterproof 8-pin plug connector with 25m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£331.99	or call us for a quote
0362624	Waterproof 8-pin plug connector with 50m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£589.32	or call us for a quote
0362625	Waterproof 8-pin plug connector with 100m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£1,131.97	or call us for a quote

CMP/SMP Series Pyranometer Mounting Options
CMP-BRACKET	Small disc bracket, suitable for mounting a SP-Lite 2, LP-02 and CMP/SMP Pyranometers.		£25.00	or call us for a quote