Products

Latest added news blog

MSR175 Shock Transportation Data Logger

Kenny Laidlaw

Oct 01,2018

The MSR175 shock transportation data logger is the newest miniature logger from MSR. The MSR175 ut...read more >

VIEW ALL OUR LATEST NEWS

previous product 7/15 next product

SMP10 Smart Pyranometer

Quick Overview

The SMP10 Pyranometer is a secondary standard pyranometer with a sealed internal drying cartridge that allows for 10 years operation without maintenance. The SMP10 is identical to the CMP10 pyranometer but includes an RS485 Modbus RTU interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The amplified output options are 0-1V or 4-20mA and these are identically configured to allow for easy installation and exchange during recalibration. The SMP10 has a dual-dome construction with high quality glass and an increased thermal mass covering a spectral range of 285 to 2800nm. This unit is ideal for high quality solar radiation monitoring for site prospecting or technology research for solar energy applications and any locations where the access to the instrument for maintenance is difficult or restricted.

View Options

Details

The SMP10 Smart pyranometer and has a larger housing than the SMP3 with increased thermal mass. A 32 junction thermopile sensing element features faster response, better linearity and a wider measurement range than the SMP3. There are two high quality concentric glass domes, 2mm thick, which provide improved directional error and thermal isolation. The SMP10 has an internal desiccant that provides at least 10 years maintenance free operation.

The SMP10 come with a 0-1V or 4-20mA analogue output and these can be rescaled by the user with the supplied PC software. The units are configured with the 0-1V output set as -200 to 2,000Wm² and the 4-20mA output as a 0-1,600Wm². Negative ranges are provided to allow the sensor to show levels at night when there is heat emitted from the sensor.

All SMP's have the RS485 Modbus RTU interface, very low power requirements and are supplied with comprehensive, traceable, calibration certificates. Calibrations are traceable to the World Radiometric Reference (WRR) in Davos Switzerland and are performed in accordance with ISO 9847, Annex A.3 'Calibration of Field Pyranometers by comparison to a Reference Pyranometer'.s and are supplied with comprehensive, traceable, calibration certificates.

Diagram

Specification

ISO 9060:1990 Classification:	Second Standard
Spectral Range:	285 to 2800nm
Response Time:	<2s
Zero Offset A:	<7 W/m²
Zero Offset B:	<2 Wm²
Directional Error (Up to 80º with 1000 Wm² beam):	<10 Wm²
Temperature Dependence of Sensitivity:	<1% (-20 to 50°C) <2% (-40 to 70°C)
Analogue Output:	-V version: 0-1V -A version: 4-20mA
Analogue Output Range:	-V version: -200 to 2000W/m² -A version: 0 to 1600W/m²
Digital Output:	2 wire RS485 Modbus RTU
Digital Output Range:	-400 to 4000W/m²
Operating Temperature:	-40 to +80°C
Supply Voltage:	5 to 30vDC
Power Consumption (at 12vDC):	-V version: 55mW -A version: 100mW
Ingress Protection:	IP67

SMP10 instruments have an 8-pin socket and can be connected to a standard cable with a pre-wired waterproof 8 pin plug and flying leads. Cable lengths of 10m, 25m, 50m and 100m are available.

To improve the measurement accuracy of the SMP10 and SMP11 pyranometers the CVF4 ventilation unit can be used. It can be used outdoors under all weather conditions and includes a built in heater to keep the air just above ambient temperature which helps disperse precipitation and melt frost, or even melt snow and ice in cold climates. The CVF4 has a tacho output that can be used to check the proper operation of the CVF4. The output signal is 5V and nominal output should be at 146Hz. Higher frequency would suggest the filter needs replaced, whilst lower frequency could highlight an issue with the ventilator.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM

SMP 10 Smart Pyranometer with 0-1vDC Output
0374905-100	SMP 10 Smart Pyranometer with 0-1vDC output. Double 2mm glass dome. Integrated leveling. Sun shield. Spectral range 285 - 2800nm, response time less than2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus and 0-1vDC output. Analogue output range -200 to 2000Wm², Digital output range -400 to 4,000Wm². Power Supply 5 to 30vDC. Supplied with no plug or cable.	Datasheet Size: (1.38 MB)	£2,117.00	or call us for a quote
0374905-102	SMP 10 Smart Pyranometer with 0-1vDC output. Double 2mm glass dome. Integrated leveling. Sun shield. Spectral range 285 - 2800nm, response time less than2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus and 0-1vDC output. Analogue output range -200 to 2000Wm², Digital output range -400 to 4,000Wm². Power Supply 5 to 30vDC. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.		£2,230.00	or call us for a quote

SMP 10 Smart Pyranometer with 4-20mA Output
0374905-200	SMP 10 Smart Pyranometer with 4-20mA output. Double 2mm glass dome. Integrated leveling. Sun shield. Spectral range 285 - 2800nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2 wire RS485 Modbus and 4-20mA output. Analogue output range 0 to 1600Wm², Digital output range -400 to 4,000Wm². Power Supply 5 to 30vDC. Supplied with no plug or cable.		£2,117.00	or call us for a quote
0374905-202	SMP 10 Smart Pyranometer with 4-20mA output. Double 2mm glass dome. Integrated leveling. Sun shield. Spectral range 285 - 2800nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2 wire RS485 Modbus and 4-20mA output. Analogue output range 0 to 1600Wm², Digital output range -400 to 4,000Wm². Power Supply 5 to 30vDC. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.		£2,230.00	or call us for a quote

Connection Options for SMP, SGR, SUV, CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3
2523146	Waterproof 8-pin plug connector for the following Kipp & Zonen equipment. SMP Pyranometers, SGR Pyrgeometers, SUV Radiometers, CMP Pyranometers with PT100 output, CGR3 and CGR4 with PT100 output, CHP1, CNR4, UVS Radiometers and CSD3 Sunshine Duration Sensors.		£49.00	or call us for a quote
0362621	Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£173.33	or call us for a quote
0362623	Waterproof 8-pin plug connector with 25m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£331.99	or call us for a quote
0362624	Waterproof 8-pin plug connector with 50m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£589.32	or call us for a quote
0362625	Waterproof 8-pin plug connector with 100m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£1,131.97	or call us for a quote

CVF 4 Ventilation Unit
0378900-000	CVF 4 Ventilation unit designed to provide clean air-flow over the dome or window to minimise the formation of dew and reduce the frequency of dome cleaning. Replaceable fan inlet filter. Power Supply 8-13.5vDC (5W continuously at 12vDC, 5.5W with heater) Operating temperature range -40 to +70°C. Waterproof connector, supplied without plug or cable. Suitable for Kipp & Zonen CMP & SMP series pyranometers and CUV5 & UVS radiometers.		£1,211.00	or call us for a quote

Connection Options for CMP Pyranometers, CGR3 (10K), CGR4 (10K), CVF4 & CNF4 Ventiliation units.
2523145	Waterproof 4-pin plug connector for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units. Requires customers own cable wiring.		£42.00	or call us for a quote
0362611	Waterproof 4-pin plug connector with 10m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.		£156.00	or call us for a quote
0362613	Waterproof 4-pin plug connector with 25m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.		£322.66	or call us for a quote
0362614	Waterproof 4-pin plug connector with 50m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.		£581.32	or call us for a quote
0362615	Waterproof 4-pin plug connector with 100m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve for CMP Series Pyranometers and Pygeometers with 10K thermistor output.		£1,114.64	or call us for a quote

Mounting Options
0362700	CMF 1 Mounting fixture has a 88mm diameter round plate with a non-removable mounting rod of 16mm diameter and 350mm long. Can be mounted to a pole or wall with the CMB 1 mounting bracket.		£223.99	or call us for a quote
0362703	CMF 4 Mounting fixture has a 280mm diameter plate with a non-removable mounting rod of 20mm diameter and 350mm long. Can be mounted to a pole or wall with the CMB 1 mounting bracket. Suitable for ventilated radiometers.		£614.65	or call us for a quote
0369701	CMB 1 Mounting Bracket. This bracket is suitable for various mounting rod sizes, from 12mm to 20mm diameter, and can be secured via u-bolts to masts or poles from 22mm up to 60mm diameter. The bracket can also be secured directly to a wall, or other flat surface.		£292.00	or call us for a quote