SHP1 Smart Pyrheliometer

Quick Overview

The SHP1 pyrheliometer is a high quality radiometer used for the measurement of direct solar radiation. The SHP1 combines the sensor technology of the CHP1 with a smart interface to provide an RS485 Modbus and an amplified analogue output. The SHP1 has options for a 4-20mA or 0-1V output signal that is consistent between instruments and after recalibrations. The serial output is addressable and can also provide additional information on the individual units. The pyrheliometer needs to be pointed at the sun at all times and the Solys2 and 2AP Suntrackers have been designed to incorporate a SHP1. Every SHP1 is supplied with a calibration certificate traceable to the World Radiometric Reference and is valid for 1 year from the date of first use by the customer.

View Options

Details

The SHP 1 Pyrheliometer is a combination of the design and sensor technology of the CHP 1 with an integrated smart interface to provide an amplifier analogue output along with a detailed 2-wire RS485 Modbus protocol signal. Information on the units serial number, instrument settings, calibration history, etc can all be obtained from the unit via the Modbus output.Also, after recalibration, the sensor will retain the same analogue and digital measurement ranges meaning the associated data collection equipment does not require any adjustment, even replacement SHP 1's can be configured with the same settings.

A complete digital solar monitoring system can be built using a Solys2 suntracker, SHP1 (Direct solar radiation), SMP11 (Total global radiation) and a shaded SMP11 (diffuse solar radiation). All readings can then be collected via Modbus to a suitable data logging system, eg a DT82I data logger.

Diagram

Specification

Spectral range:	200 to 4000nm
Response time:	<2 seconds (95%)
Analogue Output:	-V Version: 0-1V -A Version: 4-20mA
Serial Output:	2-wire RS485, Modbus
Analogue Output Range:	-V Version: -200 to 2000Wm² -A Version: 0 to 1600Wm²
Temperature dependence of sensitivity:	<0.5% (-30 to +60°C)
Operating temperature range:	-40 to +80°C
Field of view:	5° ±0.2°

The SHP 1 has a maximum output range of -200 to 4000Wm² and the analogue outputs can be rescaled to your own requirements.The negative range is used to show negative readings and if used in atmospheric conditions it is advised to keep the factory settings.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM

SHP1-V Smart Pyrheliometer with 0-1vDC Output
0375900-100	SHP1-V Pyrheliometer. Quartz window, integrated alignment aids, rain shield. Spectral range 200-4000nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus output with rescaleable 0-1V analogue output (default range -200 to +2000Wm²). Fitted with both 10K thermistor and PT100 internal temperature sensors with output data individually temperature corrected. Supplied with no plug or cable.	Datasheet Size: (630.08 KB)	£3,373.00	or call us for a quote
0375900-102	SHP1-V Pyrheliometer. Quartz window, integrated alignment aids, rain shield. Spectral range 200-4000nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus output with rescaleable 0-1V analogue output (default range -200 to +2000Wm²). Fitted with both 10K thermistor and PT100 internal temperature sensors with output data individually temperature corrected. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.		£3,491.00	or call us for a quote

SHP1-A Smart Pyrheliometer with 4-20mA Output
0375900-200	SHP1-A Pyrheliometer. Quartz window, integrated alignment aids, rain shield. Spectral range 200-4000nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus output with rescaleable 4-20mA analogue output (default range 0 to +1600Wm²). Fitted with both 10K thermistor and PT100 internal temperature sensors with output data individually temperature corrected. Supplied with no plug or cable.		£3,373.00	or call us for a quote
0375900-202	SHP1-A Pyrheliometer. Quartz window, integrated alignment aids, rain shield. Spectral range 200-4000nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus output with rescaleable 4-20mA analogue output (default range 0 to +1600Wm²). Fitted with both 10K thermistor and PT100 internal temperature sensors with output data individually temperature corrected. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable.		£3,491.00	or call us for a quote

Connection Options for SMP, SGR, SUV, CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3
2523146	Waterproof 8-pin plug connector for the following Kipp & Zonen equipment. SMP Pyranometers, SGR Pyrgeometers, SUV Radiometers, CMP Pyranometers with PT100 output, CGR3 and CGR4 with PT100 output, CHP1, CNR4, UVS Radiometers and CSD3 Sunshine Duration Sensors.		£49.00	or call us for a quote
0362621	Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£173.33	or call us for a quote
0362623	Waterproof 8-pin plug connector with 25m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£331.99	or call us for a quote
0362624	Waterproof 8-pin plug connector with 50m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£589.32	or call us for a quote
0362625	Waterproof 8-pin plug connector with 100m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3		£1,131.97	or call us for a quote