The sensor utilises Sensorex’s proven flat surface self cleaning technology. The reference system has been enhanced with Sensorex’s ERP technology which provides a complex path which protects the reference in the presence of interacting ions such as proteins, silver and sulphides that interact with silver or chloride. Heavy duty high temperature reference gels offer protection against thermal breakdown of the gel. The same electrode is used for in-line or submersion applications made in a chemically resistant PPS body.

Current installed S650CD submersion installations utilising S653 or S653TC vintage cap/cables, can utilise an EA890 adapter to interface the new 8000 series sensor without replacing the original cable assembly. There are 2 choices for new submersion installations. A simple non TC submersion EA891 interface when no ATC is required. For installations requiring solution grounds and/ or ATC (automatic temperature compensation), the main EA899TC interface should be used. In-line mounting is accomplished using the main EA899 or EA899TC adapter along with the FC800 flow cell. The main EA interface can be ordered with or without ATC elements.

For applications which require more than a direct electrode output, plug-in electronic modules are available. The first three available are:

1. battery powered unity gain module EM800
2. battery powered differential module EM801
3. blind 2 wire 4-20 mA transmitter EM802/pH or EM802/ORP

Cap/cables are available in two standard lengths, 10 feet and 25 feet. Both cap cable utilise an 8 pin connector.

Want to change from in-line to submersion or visa-versa?

No problem, use most or all of the parts you currently have and just order any additional modular parts you may need.

Need to change the signal from a direct electrode output to 4-20mA?

No problem, just order the 4-20mA module and plug it between the interface and cap cable.

If you prefer an independent pH or ORP transmitter for local display, our TX100 transmitter can provide this solution, or you can interface your S8000 platform to your favourite make and model of instrumentation.

Putting together your S800 platform

The S8000 series pH and ORP (REDOX) platform is easy to configure. You order only the components that you need. The same electrode can be used for in-line or submersion installations. You can configure the mounting pieces to suit your installation preference as well as interface to different makes and models of instrumentation. This can minimise the number of sensors you require as spares saving time and money. If you need to change the configuration, you re-use most of the components and only purchase what is required.