Omni Instruments
contact icon+44 (0) 1382 443000
+44 (0) 845 9000 601
WE ARE HERE TO HELP

Contact our technical sales team now to discuss your requirements

help icon
MY BASKET basket arrow

£0.00

My Cart

You have no items in your shopping cart.

Click basket to edit.

Products

Latest added news blog
MSR175 Shock Transportation Data Logger
Kenny Laidlaw
Oct 01,2018
The MSR175 shock transportation data logger is the newest miniature logger from MSR.  The MSR175 ut...read more >
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter

OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter

Quick Overview

This low cost clamp on ultrasonic flowmeter is ideal for long-term deployment for flow measurement and closed-pipe applications, such as liquid process control, water flow measurement (hot/chill water, city water, sea water), sewage and sludge measurement, and measurements of oil (crude/diesel/fuel), chemicals (alcohol, acids, etc.), beverage, and many other liquids. Once the sensors are clamped on the pipe using the supplied stainless steel straps it can be programmed in a matter of minutes via the front keypad. In addion to the 4-20mA and pulse outputs the unit can also communicate via GSM modem.
View Options

Details

OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with transducers for pipe sizes 15-100mm or 100 - 700mm, complete with manual and stainless steel straps.

Features:

  • High accuracy. Normally, ±1%. When on-site calibration available, ±0.5%.
  • Wide flow range 0.03 to 105ft/s.
  • Wide pipe size range (from 1" to 240").
  • Noninvasive. No pipe disturbance. No moving parts, no pressure drop.
  • Easy and economical installation. No cutting pipe, non drilling hole.
  • Suitable for all commonly used pipe materials
  • Easy to use and set up. Self-explanatory menu programming
  • Velocity, volumetric and totalized flow
  • GPRS / GSM networking capability with certain model
  • Ideal for both clean and opaque liquid flow measurements

Specification
Linearity 0.5%
Repeatability 0.2%
Accuracy Normally better than ±1%. Could be ±0.5% with on-site calibration.
Response Time 0.5 Seconds
Display Backlit LCD 2x20 Characters.
Display instantaneous flow rate, accumulated flow rate (positive, negative and net rates), velocity, time, analog inputs, etc.
Units English (U.S.) or metric
Signal Outputs Current output: 4-20mA or 0-20mA. Impedance 0-1k
  OCT output: pulse signal for accumulated flow rate (positive, negative and net rates); frequency signal for instantaneous flow rate (0-9,999Hz selectable)
  Relay: output 20 signals, such as no signal, reverse flow & more
Signal Inputs 5 channel analog signal inputs (for signals such as temperature, pressure, liquid level, etc.)
Data Logger Automatically record the following information:
1) The totalizer data of the last 64 days / 64 months / 64 years
2) The power time and corresponding flow rate of the last 64 times power on and off events
3) Allow manual or automatic flow loss compensation
4) The instrument working status of the last 64 days.
Computer Interface RS232
Enclosure Protection Class: IP65 (NEMA 4X)
Liquids Type: Virtually all commonly used liquids (full pipe)
Temperature: 32˚F - 212˚F (0˚C - 100˚C)
Concentration: <10,000ppm and small air bubble concentration
Pipe Sizes: 1" - 240"
Materials: All metals, most plastics, fiber glass, etc.
Pipe Length: Better longer than 15D, where D is pipe diameter. If a pump is near, the straight pipe section following the pumps should be > 30D
Cable Shielded transducer cable. Standard length 15ft (5m). Can be extended to 1640ft (500m). Contact the manufacturer for longer cable requirement. Cable should not be laid in parallel with high-voltage power lines, neither should it be close to strong interference source such as power transformers.
Power 8 to 36VDC, 80 to 265VAC optional with PSU

 

Transducer Specifications
Type S1 Small size transducer (magnetic)
For pipe size ½” – 4”
Type M1 Standard medium size transducer (magnetic)
For pipe size 2” – 28”
Type L1 Large size transducer (magnetic)
For pipe size 11” – 240”

Availability: Stock Item

 

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF DESCRIPTION DOWNLOADS PRICE ORDER ITEM
 
Omni-TUF-200F Ultrasonic Flow Meters
OMNI-TUF-200F-1-5-ADAR
OMNI-TUF-200F-1-5-ADAR
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with Small (S1) transducers for pipe sizes 1 inch (DN30) to 4 inch (DN100), complete with 5 metres of shielded cable. Outputs, RS232, 4-20mA for flow rate and Pulse for flow total. Power supply 8-36vDC and 240vAC.
View FileManual
   Size: (693.46 KB)
View FileDatasheet
   Size: (715.89 KB)
£1,001.76
or call us for a quote
OMNI-TUF-200F-2-5-ADAR
OMNI-TUF-200F-2-5-ADAR
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with Medium (M1) transducers for pipe sizes 2 inch (DN50) to 28 inch (DN700), complete with 5 metres of shielded cable. Outputs, RS232, 4-20mA for flow rate and Pulse for flow total. Power supply 8-36vDC and 240vAC.
£1,070.79
or call us for a quote
OMNI-TUF-200F-3-5-ADAR
OMNI-TUF-200F-3-5-ADAR
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with Large (L1) transducers for pipe sizes 11 inch (DN300) to 240 inch (DN6000), complete with 5 metres of shielded cable. Outputs, RS232, 4-20mA for flow rate and Pulse for flow total. Power supply 8-36vDC and 240vAC
£1,134.83
or call us for a quote