MX16 Easy Duo Gas Detectors with Control Panel

Quick Overview

The MX16 Easy Duo is a combined MX16 Gas Controller and Single Gas Detector for a simple factory configured gas detection system. The 'Easy Duo' set includes an MX16 Controller pre-configured with an OLCT10N to detect Oxygen, Carbon Monoxide, Carbon Dioxide, Methane (0-4.4%Vol or 0-5%Vol) Hydrogen gas. The MX16 Controller comes with 3 relay outputs, LCD display with soft-touch function keys and an RS485 Modbus communications option.

View Options

Details

Features

Single channel gas controller
Supplied with factory configured OLCT10N gas detectors with 5m cable.
OLCT10N detectors suitable for O2, CO, CO2, CH4 (0-4.4%Vol or 0-5%Vol) or H2 gases
Low Cost and Easy to Install
Integrated Relays
RS485 Output Signal Option.
Easy to read large graphic and multi-language LCD back-lit display
Soft-touch Keys for Embedded Menus

Applications

Lack of Oxygen in MRI Rooms
Excess CO2 in Breweries or Cellars
Gas Leaks in Small Boiler Rooms
Gas Releases in Battery Charging Areas
Waste Water Treatment Plants
Petrochemical
Laboratories

Specifications

General Specifications

Dimensions:	265 x 266 x 96mm
Ingress protection	IP55
Cable entries:	3 M16 cable glands, 4 to 8 mm² (8 to 11 AWG) outer diameter cable 2 M20 cable glands, 6 to 12 mm² (7 to 9 AWG) outer diameter cable
Display:	LCD back-lit display + smart keys Display in grayscale in case of fault Bar graph with alarm threshold
Visual indicators:	6 LEDs, 5 LEDs for Detector Status Line, 1 LED fault indicator and 1 LED Power Condition
Buttons:	5 smart keys, 1 audible alarm accept/reset button
Operating Environment:	Temp: -20°C to +50°C, Humidity 5 - 95%RH
Power Supply:	100-240vAC 50-60 Hz (35W)
Consumption:	250 mA max (without captor)
Digital lines:	1 for OLCT10N Gas Detector RS-485 communication, proprietary protocol, 9600 Baud 2 twisted shielded-pair cable
Max current output per line:	0.42 to 1A with internal AC power
Per channel:	2 alarm levels (AL1, AL2) + Fault
	Accessible and modifiable alarm threshold Al1 and Al2, manual acknowledgement
On-board relays:	2 alarm relays 1 fault relay (non-configurable) Dry Contact Relay, RCT, 250vAC, 5A
Digital outputs:	RS-485 Modbus RTU Comms

The Easy Duo option for the MX 16 controller includes a OLCT 10N detector with a 10 metre cable included (specific RS485 for digital communication). Factory preconfigured, it doesn’t require configuration software.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM

MX16 Easy Duo Packs
MX16-N-001-0-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for CH4 (Methane) fitted with 10m cable. Range 0-5% Volume. 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.	Datasheet Size: (1.28 MB)	£940.00	or call us for a quote
MX16-N-002-0-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for CH4 (Methane) fitted with 10m cable. Range 0-4.4% Volume. 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£940.00	or call us for a quote
MX16-N-003-0-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for H2 (Hydrogen) fitted with 10m cable. Range 0-4% Volume. 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£940.00	or call us for a quote
MX16-N-200-0-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for O2 (Oxygen) fitted with 10m cable. Range 0-30% Volume, sensor life 2 years. 2 Alarm levels (Al1, Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£940.00	or call us for a quote
MX16-N-204-0-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for CO (Carbon Monoxide) fitted with 10m cable. Range 0-300ppm. 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£940.00	or call us for a quote
MX16-N-239-0-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for CO2 (Carbon Dioxide) fitted with 10m cable. Range 0-5% Volume. 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£940.00	or call us for a quote

MX16 Easy Duo Packs with RS485 Modbus Comms
MX16-N-001-1-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for CH4 (Methane) fitted with 10m cable. Range 0-5% Volume. RS485 Modbus Comms, 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£1,100.00	or call us for a quote
MX16-N-002-1-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for CH4 (Methane) fitted with 10m cable. Range 0-4.4% Volume. RS485 Modbus Comms, 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£1,100.00	or call us for a quote
MX16-N-003-1-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for H2 (Hydrogen) fitted with 10m cable. Range 0-4% Volume. RS485 Modbus Comms, 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£1,100.00	or call us for a quote
MX16-N-200-1-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for O2 (Oxygen) fitted with 10m cable. Range 0-30% Volume, sensor life 2 years. RS485 Modbus Comms, 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£1,100.00	or call us for a quote
MX16-N-204-1-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for CO (Carbon Monoxide) fitted with 10m cable. Range 0-300ppm. RS485 Modbus Comms, 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£1,100.00	or call us for a quote
MX16-N-239-1-0-0	Easy Duo MX16 Gas Detection Controller with OLCT10N for CO2 (Carbon Dioxide) fitted with 10m cable. Range 0-5% Volume. RS485 Modbus Comms, 4 Alarm levels (Al1, Al2, Overscale, Underscale) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm.		£1,100.00	or call us for a quote

MX16 Installation CD
WCDCOM16	COM 16 Installation CD with USB cable		£205.00	or call us for a quote