Open Area, Tunnel & Duct Air Flow Monitoring

The MiniAir 6 is a vane anemometer for measuring the flow velocities of gases with a linear voltage output. The MiniAir 6 provides a 0-2V output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 6.5-26vDC power supply and the stan

The MiniAir 60 is a vane anemometer for measuring the flow velocities of gases with a linear frequency output. The MiniAir 60 provides a 0-4vDC/TTL output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 4.5-5.5vDC power supply a

The MiniAir64 vane anemometers provide a 4-20mA output relative to the flow velocity ranges of up to 20m/s or 40m/s. The units are simple to install or use as part of a fixed system or in conjunction with data loggers, displays or portable indicators. The sensors operate from a 9-24vDC power supply.

These MiniAir vane anemometers come with Ex certification and provide linear voltage or current outputs relative to the flow velocity ranges of up to 20m/s or 40m/s. Each unit comes with external electronics and EX barrier, with a standard 20m cable between the probe and electronics. The electronics

The MC 4.0 is suitable for determining the flow velocity, temperature and relative humidity of gaseous and liquid media. The measurement with a vane anemometer is considered to be the most accurate of the possible measurement methods. The MC 4.0 includes an internal logger for up to 1 million rea

The MiniAir20 Eex universal anemometer is suitable for measuring the velocity of gaseous media plus air & surface temperature in a hazardous areas. The display provides an instantaneous value measurement with freely selectable average value measuring intervals, from 2 seconds up to 2 hours.

The MC 4.0 is suitable for the measurement of very low air flows, as well as air temperature and humidity readings. The measurement with a thermoelectric anemometer with uni-directional or omni-directional probe with flow ranges as low as 1 or 5m/s. The MC 4.0 includes an internal logger for up t

The ThermoAir 6 and 64 anemometers are ideal for low air flow measurement with high resolution (0.01-5m/s) where an analogue output is required to interface with external systems such as PLC's data loggers or BMS systems. Features include automatic zero point calibration and temperature compensatio

The MC 4.0 ManoAir is part of the MC 4.0 range but comes with a pressure sensor module that allows the unit to measure absolute or differential pressure. The MC 4.0 ManoAir includes an internal logger for up to 1 million readings and pressure module for connecting 2 sensors. The pressure modules

The Lab 4.0 is an instrument suitable for gas analysis in all laboratorial activities. The instrument can be used for differential pressure manometer for very small measuring areas, Particle Measurement System or Environmental Gas Analysis with Volatile Organic Compound (VOC) and Indoor Air Quali