Trip amplifiers, signal converters and isolators for PT100, thermocouple, voltage, current and frequency inputs, with 4-20mA, voltage and relay outputs, fully programmable.
5104 Repeater/Power Supply
The PR 5104 can be used as a power supply and signal isolator for 2-wire transmitters or as a signal isolator or repeater for a variety of standard industrial analogue input signals. The PR 5104A is available for safe area use as a single or dual channel device, whilst the PR 5104B is suitable fo
Price range : £258.48 - £377.70
5105B EX-Isolated Driver
1- or 2-channel version ~ 3- / 5-port 3.75 kVAC galvanic isolation
Driver for Ex area
20 programmable measurement ranges
Universal supply by AC or DC
Hazardous Area Approved
Price range : £276.42 - £377.70
5106 HART Transparent Repeater
3- / 5-port 3.75 kVAC galvanic isolation ~
Low response time
2-wire supply > 17 V ~ 1- or 2-channel version
Universal AC or DC supply
Price range : £276.42 - £416.73
9106A HART Transparent Repeater
9106A is a 1- or 2-channel isolated 1:1 repeater. The device supplies 2-wire SMART transmitters and can also be used for 2-wire SMART current sources. HART & BRAIN protocols are supported and are transferred bi-directionally.
Price range : £68.57 - £351.32
9106B ATEX Approved HART Transparent Repeater
9106B is a 1- or 2-channel isolated 1:1 repeater barrier for intrinsic safety applications. The device supplies 2-wire SMART transmitters and can also be used for 2-wire SMART current sources. HART & BRAIN protocols are supported and are transferred bi-directionally
Price range : £68.57 - £351.32
9107A HART Transparent Driver
9107A is a 1- or 2-channel isolated 1:1 driver. The device allows for the operation and drive control of I/P converters, valves and indicators. Operation of HART devices is possible as the unit transmits HART communications signals bi-directionally. 9107A can be mounted in a safe area, or in Zone 2/
Price range : £68.57 - £310.18
9107B HART Transparent Driver
9107B is a 1- or 2-channel isolated 1:1 driver. The device allows for the operation and drive control of I/P converters, valves and indicators in Hazardous Areas. Operation of HART devices is possible as the unit transmits HART communications signals bi-directionally. 9107B can be mounted in a safe
Price range : £68.57 - £310.18
5114 Programmable Transmitter
The 5114 is a programmable transmitter suitable for measuring DC voltage inputs up to 250vDC, current up to 100mA, PT100, Ni100 or resistance inputs. An output signal of 0-5V, 0-10V or 4-20mA is proportional and linear to the value of the input. The inputs range are fully programmable for any range
Price range : £19.00 - £645.68
5115 Signal Calculator
Redundancy measurement with 2 input signals
Signal calculator with the four arithmetical operations ~ Duplication of the input signal
Input for RTD, Ohm, TC, mV, mA, and V ~ Universal AC or DC supply
Hazardous Area Approved
Price range : £19.00 - £685.77
5116 Universal Programmable Transmitter
Input for RTD, TC, mV, linear resistance, mA and V
3-port 3.75 kVAC galvanic isolation ~ Current and voltage output
Universal voltage supply
Price range : £19.00 - £401.96
SY38 Load Cell Amplifier
SY38 DIN rail mount load cell amplifier, power supply 17-30v DC, with user selectable input range via dip switches deom 0.25 mV/V to 4.4 mV/V. Models available wirth +/-10v or 4-20mA output. High accuracy 0.002% of full scale and operating range -20 to +100 degrees C. Moulded in grey flame resistan
Price range : £141.75 - £153.66
5202B 2-Channel Pulse Isolator
Input: NAMUR proximity switch, contact ~ Sensor/cable supervision
Intrinsically safe input [EEx ia] IIC ~ Output: Relay or optocoupler
Output for cable error indication (1channel)
115/230 V or 24 V supply Hazardous Area App
Price range : £156.00 - £206.79