The 4114 is a programmable universal transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The unit converts the input into a configurable 0(4)-20mA or 0-10V output that is proportional and linear to the value of the input. Units are avail
Price range : £16.89 - £177.00
4116 Universal Transmitter/Trip Amplifier
Universal signal conditioning module, detachable front programming unit 4510, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. Analog output and 2 relays, universal power supply of 21.6 - 253 VAC and 19.2 - 300 VDC
Price range : £19.00 - £191.00
4131 Universal Trip Amplifier
Universal signal conditioning module, detachable front programming unit 4510, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. 2 relays , universal power supply of 21.6 - 253 VAC and 19.2 - 300 VDC
Price range : £19.00 - £162.00
4104 Universal Uni-/Bi-Polar Signal Transmitter
The 4104 is a universal transmitters suitable for almost any voltage or current conversions. The unit will accept both unipolar and bipolar signals, operating with both passive and active inputs and outputs. The transmitters will accept any input in the range of +/-10vDC or +/-20mA to provide an out
Price range : £19.00 - £155.10
4179 Universal AC/DC Transmitter
The 4179 is a programmable universal transmitter suitable for converting AC voltage or current to a standard DC voltage and current signal with 2.3kV isolation. The unit is capable of measuring up to 0 to 5A RMS and 0-300V RMS directly with a narrow 500mA RMS and 500mV RMS span. Units are availab
Price range : £19.00 - £178.00
4184 Universal Uni/Bi-Polar Signal Transmitter
The 4184 is a programmable universal transmitter suitable for converting uni/bi-polar DC voltage or current inputs to uni-bi-polar DC outputs. The unit is capable of measuring DC voltages from -300V to +300V and DC currents from -100mA to +100mA. Units are available with the 4510 programming display
Price range : £19.00 - £186.00
3100 Slim Series of 6mm Isolators & Converters
The Slim Series is a range of 6mm isolators, converters, repeaters and splitters. This series is designed for galvanic isolation of RTD, TC, potentiometer, mA and V signals as well as conversion of these signals into a standard current/voltage signal. The series includes an isolated universal conver
Price range : £4.22 - £180.40
2224 Valve Controller
The 2224 Valve Controller is a microprocessor-based unit containing ramp functions for soft start and stop and jump functions thus avoiding deadband at start and changes between A & B valves. The user interface of the valve controller consists of three pushbuttons and a 3-digit LED display. During o
Price range : £4.00 - £486.00
2229 Switchmode Voltage Regulator
AC/DC input voltage ~ Adjustable output 5...24 VDC, max. 40 W
Adjustable from external potentiometer ~ Short-circuit protection
Thermal overload protection
Standard 11-pole relay socket
Price range : £4.00 - £97.06
2231 Trip Amplifier
The 2231 Trip Amplifier is a microprocessor-based unit allowing very accurate setting of process parameters. Each unit is supplied with basic calibration data, allowing the inputs to be programmed to the required signal range without re-adjustment. The user interface of the trip amplifier consist
Price range : £4.00 - £330.00
2261 mV - Load Cell Transmitter
The 2261 is a programamble load cell amplifier suitable for 4 wire bridge / strain gauge sensors. Both zero and span are programmable via the front key pad and the LED display allows easy setup.The unit also has NPN/PNP input for external taring and a regulated supply for standard transducers
Price range : £4.00 - £369.26
2289 Signal Calculator
Two analogue inputs ~ Multiple functions
Front-programmable ~ 3-digit LED display
Version with a Pt100 input
Analogue output