Trip amplifiers, signal converters and isolators for PT100, thermocouple, voltage, current and frequency inputs, with 4-20mA, voltage and relay outputs, fully programmable.
The 9203B is a universal EX ATEX approved driver module for solenoids, acoustic alarms and LED, with extended self-diagnostics, single or dual channel. It can be supplied separately or installed on power rail, PR 9400 The unit is SIL 2-certified via Full Assessment. The unit is available with with m
Price range : £68.57 - £250.04
9203A Solenoid & Alarm Driver
The 9203A is a universal driver module for solenoids, acoustic alarms and LED, with extended self-diagnostics, single or dual channel. It can be supplied separately or installed on power rail, PR 9400
The unit is SIL 2-certified via Full Assessment. The unit is available with with mechanical switch
Price range : £68.57 - £250.04
9116 Universal Converter
Universal converter module, detachable front programming unit 4510, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V.
Price range : £16.89 - £368.21
6185 Loop Powered Isolator
The 6185 is a loop powered isolator suitable for the galvanic separation of analogue current signals with a straight 1:1 conversion of 0-20mA inputs. The 6185 is available in single, dual and four channel versions with a slimline 3185 series available in single and dual channel versions, all with no
Price range : £92.85 - £324.95
5203B EX Solenoid/Alarm Driver
1- or 2-channel version ~ 3- / 5-port 3.75 kVAC galvanic isolation
Solenoid driver for Ex area ~ Digitally controlled voltage supply for Ex area
Universal supply by AC or DC
Hazardous Area Approved
Price range : £233.16 - £289.08
5202B 2-Channel Pulse Isolator
Input: NAMUR proximity switch, contact ~ Sensor/cable supervision
Intrinsically safe input [EEx ia] IIC ~ Output: Relay or optocoupler
Output for cable error indication (1channel)
115/230 V or 24 V supply Hazardous Area App
Price range : £156.00 - £206.79
SY38 Load Cell Amplifier
SY38 DIN rail mount load cell amplifier, power supply 17-30v DC, with user selectable input range via dip switches deom 0.25 mV/V to 4.4 mV/V. Models available wirth +/-10v or 4-20mA output. High accuracy 0.002% of full scale and operating range -20 to +100 degrees C. Moulded in grey flame resistan
Price range : £141.75 - £153.66
5116 Universal Programmable Transmitter
Input for RTD, TC, mV, linear resistance, mA and V
3-port 3.75 kVAC galvanic isolation ~ Current and voltage output
Universal voltage supply
Price range : £19.00 - £401.96
5115 Signal Calculator
Redundancy measurement with 2 input signals
Signal calculator with the four arithmetical operations ~ Duplication of the input signal
Input for RTD, Ohm, TC, mV, mA, and V ~ Universal AC or DC supply
Hazardous Area Approved
Price range : £19.00 - £685.77
5114 Programmable Transmitter
The 5114 is a programmable transmitter suitable for measuring DC voltage inputs up to 250vDC, current up to 100mA, PT100, Ni100 or resistance inputs. An output signal of 0-5V, 0-10V or 4-20mA is proportional and linear to the value of the input. The inputs range are fully programmable for any range
Price range : £19.00 - £645.68
9107B HART Transparent Driver
9107B is a 1- or 2-channel isolated 1:1 driver. The device allows for the operation and drive control of I/P converters, valves and indicators in Hazardous Areas. Operation of HART devices is possible as the unit transmits HART communications signals bi-directionally. 9107B can be mounted in a safe
Price range : £68.57 - £310.18
9107A HART Transparent Driver
9107A is a 1- or 2-channel isolated 1:1 driver. The device allows for the operation and drive control of I/P converters, valves and indicators. Operation of HART devices is possible as the unit transmits HART communications signals bi-directionally. 9107A can be mounted in a safe area, or in Zone 2/