Fuel Level Float Switch
Fuel level float switch, overhead suspension type, with 5 metres of cable, contact rated at up to 3 amps, 250 VAC, suitable for clean or dirty water, fuel oil, tank levels, channels etc...
G2A10I09LMA
Range 10-190, Size 1 inch BSPT (20.7 Bar) Aluminium body...
GEN II Wireless Energy Monitoring System
The GENII wireless energy monitoring system is able to cover a wide range of parameters. Transmitters are available for direct connections to ND-350 Power meters, U6 Gas meters, various heat meters, flow meters and other energy monitoring devices. A system can be customised to your requirements, with battery or externally..
GMX560 Marine Weather Station for Wind, Temp, RH & Pressure
The MaxiMet GMX560 Marine is similar to the GMX500 with an improved environmental protection, IP68, 6-axis compass and M12 Connection. Allowing it to survive harsh weather conditions encountered by buoys and unmanned surface vessels, including short-term immersion and compensation for tilt with pitch and roll data. The combined instrument is..
GSKINKIT-2615C
gSKIN U-Value Kit for measurement of u-value, heat flux and 2 temperature readings. Range ±300W/m² with a resolution of 0.22W/m². Sensor size 30mm x 30mm. Data logger has a logging frequency of 50Hz to every 12 hours and storage for up to 2 million readings. Kit consists of MSR Logger,..
HBS/1/733
Surface mount 3 wire PT100 sensor, with adhesive patch, with 3 metres of PVC cable...
HF132-WB1XD1XX
HygroFlex HF1 Transmitter, HF132-WB1XD1XX, for relative humidity and temperature measurement with display in a wall mounted enclosure. Standard Temperature Range: 0-50°C and Humidity 0-100%RH with Accuracy <±2%RH. 3-Wire Transmitter with 4-20mA Outputs...
HF3A-D1X0000210100
Wall Mounted 3/4-Wire HygroFlex HF3A Advanced Humidity and Temperature Transmitter with RS485 Modbus and 4-20mA Outputs. 0-50°C Temperature and 0-100% RH Relative Humidity. Enclosure with Horizontal Mounting and 1 x M12 electrical connection. Fitted with integrated probe...
HITEMP140-PT-5-TSK
Submersible Datalogger with a vented PTFE thermal barrier and a 24 inch Flexible Probe in a low profile 316 stainless steel enclosure. Temperature Range: -200 to +260 C from a 100 ohms Platinum RTD with a resolution of 0.01 C. Internal Memory 32,700, sample rate 1 second up to 24..
HP32-S-SET
HygroPalm 32 handheld relative humidity and temperature instrument with a single probe input. Psychrometric calculations of Dew point, wet-bulb temperature, mixing ratio, enthalpy, water vapor content and water vapor density. Includes HC2A-S Probe, HW5-CODE, micro USB cable, soft case...
HPP-110
9V PP3 Power Supply cable for HPS-120 radio modems. Allows the HPS120 transceiver to be powered by a standard 9V PP3 battery. Battery not included...
HPX-200BAR
HPX High Pressure Calibrator, Range 0 to 700 Bar, Accuracy 0.05% (10 to 40°C). HPX calibrator is supplied with: Hydraulic Oil; Carry Case; Spare Battery; Port Adaptor ¼ inch to ⅜ inch BSP; Port Adaptor ¼ inch to ½ inch BSP; Allen Key(s); K114A USB Interface Cable; Test Certificate and..
HT5
HT5 High Temperature Thickness Meter Probe for MT Series Thickness Meters...
I1-VAC-1
Smappee Power Box. Includes Voltage terminal to collect power supply voltage readings. Suitable for power supplied any electricity network worldwide. single, split or 3-phase. Range 90-284vAC, 50/60Hz, Dimensions: 55 x 55 x 26.6mm, Weight: 44g. Operating Temp 25 to 75°C @ 0-95%RH Non-Condensing...
ICA Series Miniature Analogue Strain Gauge Voltage & Current Signal Amplifiers.
The ICA series of In-Cell/Miniature Amplifiers are designed for applications where it is not possible to fit a larger amplifier due to space constraints, or where a direct amplified output is required from a sensor. The amplifiers will provide a standard industrial output from the mV/V output of load cells..
LEO-REC-CAPO-300MBAR
LEO Record CAPO Digital Manometer with digital display and data logger for low pressure and temperature. Range 0-300mBar, relative to external pressure, with a 0.2%FS accuracy. Internal memory for up to 57,000 readings and internal battery for up to 2 years operation. Pressure connection: Stainless Steel ¼" BSP male connection...
LEO-SUBSEA-4000M-ED
Subsea housing, stainless steel, for Keller Leo Record, with machined ports for 1/4BSP male connection. Assembly suitable for immersion in 4000M of seawater. Internal dimensions 86mm ID x 110mm long. 1/4 BSP through on end cap. With machined port 7/16NF port for subcon connector. Includes subcon bulkhead connector. Data from..
LEO5 Digital Manometer with Data Logger
The Keller LEO 5 is a combined pressure and temperature indicator and data logger available for pressure ranges up to 1000 Bar and featuring an IP65 rated stainless steel enclosure. The robust housing combines contemporary microcontroller-based electronics and capacitive-touch controls, operated through the environmentally-sealed safety glass front panel. The large..
LEO5-1-30BAR-¼BSP
LEO 5 High Resolution Manometer with Peak and Recording Function for up to 56,000 readings. Range -1 to 30 Bar with accuracy of 0.05%FS. Standard mode is at 2Hz, peak reading mode at 1kHz. Pressure connection 1/4 inch BSP male connection, compensated temperature 0 to 50°C, internal battery for up..
Leveline Packages
The LeveLine packages include a 10m water level sensor, 10m cable (or deployment code) to the surface and LL-PC-Kit. Units are ideal starter kit for monitoring rivers, docks or coastal water levels in a single package. Simply records water depths up to 10m, either with a logger receivable after logging,..
Leveline-Mini Water Level Sensor
The LeveLine-Mini is a precise water level and temperature sensor designed for diverse groundwater and surface water applications. Encased in a sealed unit, it integrates both temperature and level sensing capabilities. The LeveLine-Mini Absolute employs a durable piezoresistive ceramic pressure sensor, ensuring long-term stability and delivering an accuracy of 0.05%FS..
LFT/3/4LOW/BSP
3/4 inch Liquid Flow Turbine 5 - 50 L/min St/Steel Construction, BSP Screwed Connections..
LPMS-B2 9-Axis IMU AHRS Motion Sensor with Bluetooth
The LPMS-B2 Motion Sensor is a miniature inertial measurement unit (IMU and Attitude and Heading Reference System (AHRS) with wireless Bluetooth Classic 2.1 and Bluetooth Low Energy 4.1 connectivity. The unit is very versatile, performing accurate, high speed orientation and displacement measurements using three different MEMS sensors (3-axis gyroscope, 3-axis..
LPMS-CURS3-TTL
LPMS-CURS3-TTL OEM: 9-Axis IMU/AHRS/Motion Sensor. Accelerometer: 3 axes, ±2/±4/±8/±16 g (16 bits); Gyroscope: 3 axes, ±125/±245/±500/±1000/±2000°/s (16 bits); Magnetometer: 3 axes, ±4/±8/±12/±16 gauss (16 bits); Barometric Pressure: 300 to 1100hPa. Data output format: Raw Data; Euler Angle; Quaternion @ up to 400Hz. Power supply 5 to 15vDC (TTL), 5vDC (USB)...
