Wireless Umbilical Data Logger
Multi Channel Wireless Umbilical Logger. For real time monitoring of umbilical pressure and resistance. The system comprises of a stand alone transmitter units mounted on the umbilical drum, with sensors for pressure and line resistance. The data is continuously transmitted via wireless link to the logger providing a real time..
WLN-2500-ES-EU
WLN-2500 Series, Ethernet Module for Industrial Wireless Applications. Power supply 9-30vDC, frequency range 5GHz with a 100mW transmitter power...
WP800
WP800 Series – Standard Industrial Weighing Platform in Mild Steel. Platform dimensions 800 x 800mm. Capacity 0-150Kg up to 0-3,000Kg. Dunbar top plate with a hammer spray paint finish. Fitted with four Shear Beam load cells sealed to IP66..
WSERIAL-ETH
wSerial Wireless Concentrator, provides Ethernet & Serial connection to acquire data from wSerial-N remote nodes. Power supply 10-30vDC, operating temperature -15 to +65°C, DIN rail mounting. 1 x RS232/RS485 and 1 x Ethernet RJ45 port, supports MODBUS protocol RTU/ASCII. 2.4GHZ Zigbee radio communications, maximum range 2Km line of sight. Maximum..
WSR-8C
GEN II Wireless Sensor Receiver (WSR) unit with 8 input channels and 8 x 4-20mA Outputs. Supplied with detachable antenna, built in rechargeable batteries (6 x NiMh AA batteries), MP12U AC power supply, LC-TX3 set-up leads, User Instructions and RxConfig software...
XO677C
GSKIN Robust Heat Flux Sensor. Heat flux range -15 to +15kW/m², min sensitivity 7µV/(W/m²). Plate sensing area is 30 x 30mm with a 3.3mm thickness. 1.0m cable terminated in a TEG connector suitable for attaching to a DLOG logger...
XP279C
GSKIN Medium Heat Flux Sensor. Heat flux range -150 to +150kW/m², min sensitivity 7.0µV/(W/m²), response time 0.7 secs. Plate sensing area is 10 x 10mm with a 0.5mm thickness. 1m cable terminated in a TEG connector suitable for attaching to a DLOG logger...
0338920-005
CMP 3 Spectrally Flat Class C Pyranometer. Single 4mm glass dome. Integrated leveling. Sun shield. Spectral range 300-2800nm, response time less than 20 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. Sensitivity 24 to 32µV/W/m². Supplied with waterproof 2-pin plug connector with 50m of pre-wired yellow signal cable...
MSR175PRO Transport Shock Data Logger
The MSR175Pro is a transport shock data logger designed for the high-performance, IP65-rated transport logging. The MSR175Pro is ideal for the identification and continuous documentation of external physical effects on cargo, such as shocks and jolts, temperature extremes, changes in humidity, light, or pressure. The integrated 3-axis acceleration sensor has..
0342901-004
CSD 3 Sunshine Duration Sensor for measuring the duration and amount of direct solar radiation above 120W/m². No moving parts, direct irradiance value derived from global and diffuse radiation measurements from 3 photo-diode detectors. Derived direct irradiance output signal of 1mV/W/m² and switched output: 1V for sunny; 0V for not..
1951-PK-020
WindMaster Pro 3D Sonic Anemometer will monitor wind speeds of 0-65m/s, providing digital outputs for U, V, and W vectors. Outputs for Speed of Sound and Sonic Temperature are available as standard. Optional analogue inputs and outputs. Stainless Steel construction. Includes new transducers and firmware 'W' vertical wind component and..
HCD-S-MOD Digital Humidity and Temperature Probe
The HCD-S-MOD is a high performance Digital Humidity and Temperature Probe. Featuring very low current consumption, highest accuracy and fast measurement results within 50ms. This is due to the new AirChip4000, which together with the new HYGROMER® HT-1 sensor forms a powerful combination...
Leveline-Gauge Logger
The LeveLine-Gauge is a precise water level and temperature logger designed for diverse seawater and surface water applications. Encased in a sealed unit with a vented cable, it integrates water level and temperature sensing capabilities. The LeveLine-Gauge include a vented piezoresistive ceramic pressure sensor for real-time monitoring. Offered with multiple..
0342901-034
CSD 3 Sunshine Duration Sensor for measuring the duration and amount of direct solar radiation above 120W/m². No moving parts, direct irradiance value derived from global and diffuse radiation measurements from 3 photo-diode detectors. Derived direct irradiance output signal of 1mV/W/m² and switched output: 1V for sunny; 0V for not..
0353902-002
2AP Sun Tracker with stand-alone solar tracking and/or PC-based positioning operations. Stepping motor drive through close tolerance matched gears. Directional accuracy less than 0.1 with passive tracking. Torque 40Nm, payload 65kg (balanced). Power Supply 24vDC @ 50W (100W heater). Operating temperature range -50 to +50C (with optional cold cover). Win2AP..
0353902-003
2AP Sun Tracker with sun sensor for active sun tracking. Stepping motor drive through close tolerance matched gears. Directional accuracy less than 0.02 with active tracking. Torque 40Nm, payload 65kg (balanced). Power Supply 24vDC @ 50W (100W heater). Operating temperature range -50 to +50C (with optional cold cover). Win2AP Windows..
1-Wire Digital Temperature and Humidity Sensor
The TSH206 is a 1-Wire Digital Temperature and Humidity Sensor with a 1-Wire interface, designed for accurate monitoring in environments like server rooms and offices, and suitable for smart applications and data logging. It offers ±0.4°C & ±3%RH accuracy within -10 to +60°C & 20-80%RH, features 12-bit precision, low power..
100dB Audio Alarm Sounder
This alarm sounder is an 8-tone electronic sounder with a 230vAC power supply. This product is ideal for close proximity industrial applications as an audible alarm for a monitoring system. The sounder is available with a deep base offering side entry and IP65 protection...
11220004
ComNav G2B GNSS Satellite with Compass Differential GPS (DGPS) correction and 30m cable. Output: NMEA0183. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G2B..
1416-PK-210-22
WindUltra Ultrasonic Heated Anemometer. Wind speed 0-75m/s, accuracy <2%, wind direction 0-360°, accuracy <1°. Output RS485, Modbus, NMEA and SDI-12. Operating Temperature -40 to +70°. Power Supply: 5 to 30vDC @ 7.6W. Thermoplastic and marine-grade Stainless Steel housing material with 2" Pole Mounting Adaptor and 2m M12 Cable. Dimensions: 81mm..
224-612
Therma-Hygrometer, 6100 model with an interchangeable probe. Ranges -20 to +70 C and 0 to 100%RH. The unit incorporates a clear custom backlit LCD display that simultaneously shows both temperature and humidity readings. The units require 3 standard AAA batteries and have a minimum life of 10,000 hours, with an..
3104-N
PR3104-N Slim Series Isolated Converter suitable for use in ATEX Zone 2 Environments. Isolation and conversion of 0/2-10V, 0/1-5V and 0/4-20mA input signals to 0/2-10V, 0/1-5V and 0/4-20mA output signals. Response time: less than 7 ms, Accuracy 0.05% of span. Power Supply: 24vDC ±30%, via terminals only. 6mm Slimline housing...
3186 Slim Series of 6mm Transmitter/Current Isolators
The 3186 Slim Series Isolators providing a 1:1 conversion of 4-20mA signals. The 3186A provide a 2-wire isolation with excitation and can be used to measure Passive input signals. The 3186B is used for Active input signals. Both are loop-powered devices and will cause a voltage drop of ≤3V. Accuracy..
420.0111
ThermoAir Pro Omnidirectional (V) Thermal-Electric Omnidirectional Anemometer. Air Velocity Range: 0.015-5m/s with a 0-1V Output. Accuracy ±1.0% of full scale. Sensing head surrounded by a removable 110mm diameter protective cage, handle 15mm diameter, probe length 270mm. The probe measures the flow velocity from all directions in the measuring plane perpendicular..
