808-017
M8 - U-bolt with a 50mm arc diameter. Order 4 per mounting kit...
830-205
Protective PVC boot, suitable for all MicroCal simulators...
830-258
Protective Black Silicone Boot incorporating a built in stand and magnet to aid storage/display. Suitable for the 9200 series pressure manometers...
8806000410
TxBlock-USB Program. 2-Wire Temp. Transmitter, head mount 4-20mA output. Programmable input: thermocouples type J,K,T,N,E,R,S,B, and PT100, PT1000 and NTC RTD, 2-wire loop powered 4-20mA or 20-4mA output. 2, 3 or 4-wire PT100 input with linearisation output. Accuracy: 0.2% full scale for PT100, mV and 0.15% (±1°C) thermocouples. ±0.7% NTC Working..
8813001001
LogBox-DA IP65 Data Logger, 1 Analogue (0-50mV 0-10v and 4-20mA inputs) & 1 Digital input for pulse inputs (NPN or PNP up to 4 KHz) or dry contact (up to 20 Hz), with 64,000 reading memory, battery life up to 3 years. Sensor external power switch. External connection via IP65..
888263
Quasar 900 Series Stainless Steel Sunshade...
951-030
Non Isolated Amplifier / Signal convertor for use with the Dissolved Oxygen electrode. Unit to be calibrated with sensor...
BATT-12V-4AH-LP
Tracer Lithium Polymer (LiPo) rechargeable battery pack, 12V @ 4Ah. Operating temperature -10 to +60°C. Run time: 45 mins @ 50W. Recharge time: 2-3 Hrs with 1.65A charger. Life: 300+ cycles. Dimensions: 76 x 115 x 32mm, weight 360g. Battery Pack comes supplied with a Neoprene carry case, 12V cigar..
CA-12/23
Purpose designed Stainless Steel brackets for mounting your own single length pole to a flat surface. Suitable for Rutland 504 Windcharger..
CLAN-1205-XF
cLAN Ethernet Data Logger. 1 RS232 and 1 RS485/RS422 Ports for connecting serial devices to embedded Modbus Master for I/O Expansion, NMEA0138 or Gill Instruments WindSonics and MetPak weather stations or as a transparent serial port. Event logging and Real Time Clock. Power Supply 10 to 30vDC. Dimensions: 22.5 x..
DC-DC-CONV-18-36VIN-12VOUT
SD-15B-12 DC to DC converter. Input Voltage: 18-36vDC. Output Voltage 12vDC @ 15 Watts. Dimensions: 78 x 51 x 28mm. Panel mounted enclosure with short circuit, overload and over-voltage protection...
DPA
The Duct Probe Adjustment Flange plate with compression fitting for AV-DSP, AV-622 or AV-D Flow Transmitters, RH-622, RH-D Humidity Transmitters, or MiniAir and MiniWater Probes...
DTI-EMF-HART
RS485 Output Replaced by HART Protocol Output on DTI-EMF Electromagnetic Flow Meter..
EA-PADS
50 Textile Pads for HygroClip Probe Calibration Devices. Humidity Standard should be poured onto this absorbent textile pad that is placed into the screw-on lid of Rotronic Calibration Devices. HygroClip probe can then be calibrated or adjusted by comparison with the reference value of the chosen humidity standard...
EA35-SCS
35% RH Calibration Standard, Quantity 5 Ampoules. Pack also includes 5 Textile Pads...
EA50-SCS
50% RH Calibration Standard, Quantity 5 Ampoules. Pack also includes 5 Textile Pads...
EA80-SCS
80% RH Calibration Standard, Quantity 5 Ampoules. Pack also includes 5 Textile Pads...
EDM15/15
EDM15/15 Calibration Device for two 14/15mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
EGS
EGS Calibration device for Sword Probes. Requires Humidity Standards and textile pads...
EMV-25
EMV-25 Calibration Device for vertical calibration of 25mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
ER-05
ER-05 Calibration Device for 4/5mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
ER-12K
ER-12K Calibration Device for 12mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
ER-15
ER-15 Calibration Device for 14/15mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
ERV-15
ERV-15 Calibration Device for vertical calibration of 14/15mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
