190LT-KIT
190LT Portable Clamp-on Ultrasonic Flow meter. Complete kit suitable for: Pipe Sizes: 15 to 300mm. Temperature: -30 to +105°C pipe sensors. (intermittent use to 130°C). Flow Sensors: Pair of transducers complete with 3m length cables. Electronics: Hand held, battery & mains powered with AZW Correlation measurement system 153 Display: Rate..
190LT-KIT-HIRE
190LT Portable Clamp-on Ultrasonic Flowmeter.Complete kit suitable for: Pipe Sizes: 15mm to 300mm. Temperature: -30 deg C to 105 deg C pipe sensors. (intermittent use to 130 deg C). Flow Sensors: Pair of transducers complete with 3m length cables. Electronics: Hand held, battery & mains powered with AZW Correlation measurement..
190LT-XPG-KIT-HIRE
190LT Portable Clamp-on Ultrasonic Flowmeter.Complete kit suitable for: Pipe Sizes: 15mm to 1200mm. Temperature: -30 deg C to 105 deg C pipe sensors. (intermittent use to 130 deg C). Flow Sensors: Pair of transducers complete with 3m length cables. Electronics: Hand held, battery & mains powered with AZW Correlation measurement..
190P Portable Clamp-On Ultrasonic Flow Meter Hire
Hand held microprocessor based clamp-on ultrasonic flow meter, with graphical display of data, data logger, RS232, USB, on board help, automatic speed of sound measurement and flow profile correction algorithm. Available with transducers for pipe sizes 15 - 1200mm and temperatures up to 105°C. Suitable for water, oil, chemicals in..
190PD-E-WPG-HIRE
190PDE Portable Clamp-on Heat Meter. WPG transducer suitable for pipe sizes: 15mm to 300mm, temperature range: -30 to 105°C (intermittent use to 130°C). Electronics: Portable mount IP54 Display: Rate of flow, totalised flow, velocity. Units selectable via the keypad. Data Logger: Built-in, 120000 readings. Saved as text and graph. RS232..
MX16-A-239-1-0-0
MX16 Gas Detection Controller configured for 4-20mA Analogue Input Gas Detector. Pre-Configured for Carbon Dioxide (CO2) with a range of 0-5% Volume. RS485 Modbus Comms, 2 Alarm levels (Al1, Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20..
190PDE Portable Ultrasonic Clamp on Heat Meter
The 190PDE is a heat meter that utilises the 190PD ultrasonic flow meter and a pair of termperature probes to provide a convenient portable heat meter suitable for short term non-invasive heat meter and flow monitoring. Separate sets of transducers provide a wide ppe diameter range from as small as..
190PDE Portable Ultrasonic Non-Invasive Heat Meter Hire
The 190PDE is a heat meter that utilises the 190PD ultrasonic flow meter and a pair of temperature probes to provide a convenient portable heat meter suitable for short term non-invasive heat meter and flow monitoring. Transducers provide a wide pipe diameter range from as small as 15mm up to..
TR525-M
9.66 inch Tipping Bucket Rain Gauge, resolution 1 pulse per 0.1mm. Anodised aluminium collector..
Universal Controller N3000
The N3000 is a Big Digit Universal Process Controller similar to the N2000 display but larger with 18mm PV Red Digits and 13mm SV Green Digits in a 96 x 96 x 92mm display. The basic N3000 unit includes one universal input, two SPST relays, two SPDT relays, 24vDC output..
1GT101DC
Hall effect gear tooth sensor. Supply: 4.5 to 24VDC. Output 40mA sinking switch (open collector). 100kHz operating speed. -40 to +150°C temperature range...
17150608
Replacement Alkaline Battery Pack for Ventis MX4 gas detector...
1957-10-066
20m Cable for Tipping Rain Bucket Connector on GMX Weather Station. Flying lead for tipping rain bucket..
3118
PR3118 Slim Series Bipolar Isolated Converter/Splitter suitable for use in ATEX Zone 2 Environments. Isolation and conversion of bipolar inputs to up to 2 unipolar or 1 bipolar outputs. Input options of 10mA, 20 mA, 5V or 10V with two individually configurable unipolar 0/2-10V, 0/1-5V and 0/4-20mA outputs or a..
5115B3
5115B3 Ex Signal Calculator. Redundancy measurement of 2 inputs, duplication of input signals or signal calculations of inputs. Channel one will accept RTD, Ohm, TC or mV input signals, channel two will accept mA, V or mV input signals. Power supply 21.6 - 253 vAC or 19.2 - 300vDC with..
6311082
BM25 Replacement Battery Pack..
8104221100
N1040i-RR-RS485 Universal Process Indicator with PID Function and Relay Control Outputs (1 x SPDT @ 3A and 1 x SPST @ 1.5A) and RS485 Serial Comms, Output 1: SPDT Relay (240vAC @ 3A); Output 2: SPST-NO Relay (240vAC @ 1.5A); PWM Cycle (0.5 up to 100 seconds). Sensor Input: PT100..
B-566
20 Channel Terminal Expansion Base Plate. Suitable for the GL860 data loggers..
ET24 Telemetry Lift Link Tension Load Cell System
The ET24 Telemetry Lift Link series are wireless crane scales designed for under-hook and lifting gear weighing applications plus cable tension measurement and other in-line weighing applications. The ET24 wireless crane scales connect to the T24 range of telemetry instrumentation which provides superb battery life; 600 hours for the load..
FS5708CV-8
Liquid flow switch with PVC wires, 1/2 inch NPT female connection, stainless steel body with viton seals. SPDT switch 0.3 amps at 120 VAC, operating temperature -40 to 105 deg C. Adjustable flow range set point at 0.5lpm to 9lpm..
LFT/3/FL3
3 inch Liquid Flow Turbine 227-2270 L/min St/Steel Construction, BS 4504 PN16 Flanged Connections..
MiniAir64 Vane Anemometers for Air & Gas Flows
The MiniAir64 vane anemometers provide a 4-20mA output relative to the flow velocity ranges of up to 20m/s or 40m/s. The units are simple to install or use as part of a fixed system or in conjunction with data loggers, displays or portable indicators. The sensors operate from a 9-24vDC..
PosiTector Inspection Kits
PosiTector Inspection Kits Contain a PosiTector Meter Body (Standard or Advanced) and 3 Probes. The 3 probes are: A DPM probe for monitoring environmental conditions, ensuring optimal temperature and humidity conditions before, during and afer painting for long-term performance of coating on metals; A SPG probe to measuring the surface..
PR 5114 Programmable Transmitter
The PR 5114 is a programmable transmitter suitable for measuring DC voltage inputs up to 250vDC, current up to 100mA, PT100, Ni100 or resistance inputs. An output signal of 0-5V, 0-10V or 4-20mA is proportional and linear to the value of the input. The inputs range are fully programmable for..
