These Tinytag Plus 2 loggers are designed to monitor digital and contact inputs. The logger can count up to 14,000 per logging interval with a max 50Hz frequency. Digital inputs with low levels ±0.3V and high 3-5V and contact inputs as simple open or closed circuits. The unit has an IP65 case and features a large memory, a fast offload speed and a low battery monitor. These units are supplied with a 1.5m long input lead with flying leads for easy connection.
The TGP-4910 is part of the Tinytag Instrumentation data logger range and has been designed to log count inputs from digital or volt-free contact switch inputs. The TGP-4910 will accept inputs at up to 50Hz and totalise up to 14,000 counts per logging interval. The loggers can be factory configured for use with a third-party sensors and are suitable for applications such as flow rate, utility meter, rainfall monitoring and object/people counting
| Memory Type: | Non-volatile |
| Readings: | 32,000 |
| Delayed Start: | Relative / Actual (up to 45 days) |
| Stop Options: | When full, After No. of Readings, Never (wrap around) |
| Reading Types: | Actual |
| Logging Interval: | 1 second to 10 days |
| Offload: | While stopped or when logging in minute multiples |
| Alarms: | Two, fully programmable |
| Functional Range: | -40°C to +85°C |
| Dimensions: | Diameter 60mm, Depth 35mm |
| Weight: | 85g |
The unit has a waterproof case and features high reading resolution and accuracy, a large memory, a fast offload speed and a low battery monitor.
Each logger is supplied with a 1.5m input cable, CAB-3246.
| CAB-3246 | Tinytag Count Input Lead |
| Cable Length | 1.5m |
| Cable Material: | PVC |
| Temp Rating: | -10 to +85°C |
| IP Rating: | IP68 (Connector) |
| Weight: | 35g |
A 2-pin plug, ACS-9700, is available separately.
| ACS-9700 | 2-Pin Plug |
| Shell Material: | Brass and Zinc Alloy (Nickel plated) |
| Contact Material: | Cooper Allow (Gold plated) |
| Temp Rating: | -40 to +85°C |
| IP Rating: | IP68 (-25 to 85°C) |
| Weight: | 15g |
The standard configuration will record the number of pulses seen during each user-defined logging interval. Loggers can be factory configured for use with a third-party sensor, with specific totalising, for applications such as flow rate, utility meters monitoring, rainfall and object/people counting. To confirm that this logger can be configured to work with a specific sensor, please contact us or fill in the attached Configuration Form. Without Custom Configuration, the logger will only show the counts per logging interval.
TGP-4901
£125.00
TGP-4901-ED
£175.00
ACS-9700
£25.00
CAB-3246
£20.00
ACS-6000
£10.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
