OLCT100 Fixed Gas Detector
Designed for the detection of explosive gases, toxic gases or oxygen, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and available in explosion safe or intrinsically safe versions. In addition, infrared sensors are also available for more severe..
OLCT100 Fixed Gas Detector for Refrigerant Gases
Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved..
OLCT60 Fixed Gas Detector with Display
The OLCT60 is a new high quality industrial fixed gas detector suitable for a wide range of industrial applications for the detection of flammable, toxic gases or Oxygen. The transmitters has a digital display and will provide a 4-20mA output. The detectors are ATEX approved, SIL 2 certified and available..
DG7 Series Intelligent Gas Detectors
The DG7 Series Intelligent gas detectors is split over three main options housed in a common unit with interchangeable, intrinsically safe sensor cartridges that can be replaced while powered. The DGI-TT7-E monitors toxic gases or oxygen using electrochemical cells, the DG-TT7-S employs a solid-state metal oxide semiconductor, and the DG-TX7..
OLC(T)10 EXPLO Gas Detectors for Explosive Gases
The OLC(T)10 Flammable gas detectors are designed for commercial applications and units are available for safe area and hazardous area applications. These detectors are ideal for the continuous monitoring of flammable gases present in car parks or boiler rooms. the OLC10 TWIN units can be connected in a single line..
OLCT10 Gas Detectors for Refrigerant and Toxic Gases
The OLCT10 TOX gas detectors are designed for commercial applications for the detection of refrigerant gases and the presence of exhaust gases from combustion in ambient air. These detectors are ideal for the continuous monitoring of toxic gases in car parks, boiler rooms and plant rooms for shops and warehouses...
OLCT10N Fixed Digital Gas Detectors
The OLCT10N gas detectors are designed for common gases in commercial and light industrial applications. These detectors are ideal for use in combination with the MX16, MX32 or MX43 gas controllers. Up to 32 OLCT10N detectors can be connected on a same digital line or distributed on 8 lines. These..
CTX300 Gas Detector for Non-Hazardous Areas
The CTX300 gas detector is designed with a robust polycarbonate housing for gas detection in safe areas of Oxygen, Carbon Dioxide, Toxic and refrigerant gases. The polycarbonate housing is very durable and is not affected by harsh environments. The CTX 300 comes equipped with pre-calibrated sensor units and allows for..
