OLCT100 Fixed Gas Detector
Designed for the detection of explosive gases, toxic gases or oxygen, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and available in explosion safe or intrinsically safe versions. In addition, infrared sensors are also available for more severe..
SV 4B Alarm Monitoring Unit
SV4B single channel alarm monitoring unit with 2 alarm thresholds, fault alarm, built in relays, AC / DC power supply, DIN rail mounting. When used with OLC10 or OLC100 flammable gas detector this provides a fixed monitoring and alarm system for a low cost...
OLCT100 Fixed Gas Detector for Refrigerant Gases
Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved..
OLCT60 Fixed Gas Detector with Display
The OLCT60 is a new high quality industrial fixed gas detector suitable for a wide range of industrial applications for the detection of flammable, toxic gases or Oxygen. The transmitters has a digital display and will provide a 4-20mA output. The detectors are ATEX approved, SIL 2 certified and available..
DG7 Series Intelligent Gas Detectors
The DG7 Series Intelligent gas detectors is split over three main options housed in a common unit with interchangeable, intrinsically safe sensor cartridges that can be replaced while powered. The DGI-TT7-E monitors toxic gases or oxygen using electrochemical cells, the DG-TT7-S employs a solid-state metal oxide semiconductor, and the DG-TX7..
MX16 Easy Duo Gas Detectors with Control Panel
The MX16 Easy Duo is a combined MX16 Gas Controller and Single Gas Detector for a simple factory configured gas detection system. The 'Easy Duo' set includes an MX16 Controller pre-configured with an OLCT10N to detect Oxygen, Carbon Monoxide, Carbon Dioxide, Methane (0-4.4%Vol or 0-5%Vol) Hydrogen gas. The MX16 Controller..
OLC(T)10 EXPLO Gas Detectors for Explosive Gases
The OLC(T)10 Flammable gas detectors are designed for commercial applications and units are available for safe area and hazardous area applications. These detectors are ideal for the continuous monitoring of flammable gases present in car parks or boiler rooms. the OLC10 TWIN units can be connected in a single line..
MX16 Gas Detection Control Panel
The MX16 Controller is designed for monitoring a single gas detector in MRI room, laboratory, storage, small boiler room, and breweries or battery charging rooms. The MX16 measuring unit prevents the risks of gas building up in areas that could be anoxic, toxic or explosive gases in ambient air. Units..
OLCT10 Gas Detectors for Refrigerant and Toxic Gases
The OLCT10 TOX gas detectors are designed for commercial applications for the detection of refrigerant gases and the presence of exhaust gases from combustion in ambient air. These detectors are ideal for the continuous monitoring of toxic gases in car parks, boiler rooms and plant rooms for shops and warehouses...
OLCT10N Fixed Digital Gas Detectors
The OLCT10N gas detectors are designed for common gases in commercial and light industrial applications. These detectors are ideal for use in combination with the MX16, MX32 or MX43 gas controllers. Up to 32 OLCT10N detectors can be connected on a same digital line or distributed on 8 lines. These..
CTX300 Gas Detector for Non-Hazardous Areas
The CTX300 gas detector is designed with a robust polycarbonate housing for gas detection in safe areas of Oxygen, Carbon Dioxide, Toxic and refrigerant gases. The polycarbonate housing is very durable and is not affected by harsh environments. The CTX 300 comes equipped with pre-calibrated sensor units and allows for..
BM25A Transportable Multi-Gas Detector
The BM25A/AW is a portable areas gas detector utilising diffusion or sample draw. The BM25A/AW packs the benefits of a fixed-system area monitor into an easily transportable, yet rugged instrument. Designed for team protection or area surveillance, the unit is most suitable for perimeter monitoring, rig overhauls, and mobile or..
MX32 Gas Detection Controller
The new MX32 is designed on the same platform as the MX43 and allows the control of both digital and analog channels in a wide variety of gas monitoring applications. The analog channels allow up to two wheatstone bridge gas detectors to be monitored without any additional modules. The MX32's..
MX40 Control System for BM25 Wireless Gas Detectors
The MX40 controller was designed to centralize the information transmitted by the BX 25 over a wireless network and can display up to 32 measurements in real time. When a BM 25 signals an alarm, the MX 40 also goes into alarm mode and can, for example, control internal relays..
MX43 Gas Detection Controller
The MX43 Gas Detection Controller is an analog and digital controller designed for the continuous measurement and control of the gases present in the atmosphere and for 4-20mA or digital contact signal. The MX43 Gas Panel's digital technology allows up to 32 detectors to be distributed on 8 lines for..
BM25 Replacement Sensor Cells
The BM25 gas detectors include field replaceable, plug-in sensors. The user can replace any sensor in the field and have the instrument in service after performing a simple field calibration. Up to 5 sensor can be installed, each in one or more specific location...
