The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and ...
PR 3300 Series Loop-Powered Temperature Converters
The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART ...
Wall-mounted room temperature transmitter. The unit comes complete with PT100 sensor and 4-20mA output transmitter via a 2-wire connection. Easily mounted and suitable for a temperature range 0-70C and a power supply 8-35vDC. ...
The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved ...
The 5331 is an extremely high accuracy sensor head mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The ...
The 5333 is an extremely high accuracy sensor head mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt ...
The 5334 is an extremely high accuracy sensor head mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal can be linear to the value of the input value. The unt requires a 7.2 to 35vDC power supply and ...
The 5335 is an extremely high accuracy sensor head mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that ...
The 5337 is an extremely high accuracy sensor head mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the ...
The 5343 is a sensor head mounting programmable transmitters suitable for Potentiometer, Thermistors or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the input. The unt requires a 8 to 35vDC power supply and can be mounted in a ...
The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. ...
The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit ...
The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can ...
The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on ...
The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors ...
Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant ...
The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC ...
Smart Temperature Transmitters ISOLATED TxIsoBlock & TxIsoRail
TxIsoBlock and TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. TxIsoBlock is a head mount unit and TxIsoRail is a DIN rail mount unit. Both units can be easily configured by the user for input type and working range by means of an interface ...
TDMTC Slimline Fast Response Thermocouple Transmitter
Slim-line microprocessor based, fully isolated DIN rail mounted thermocouple transmitters for K, T and J type sensors. The body is a tiny 6.2mm thick - a huge space saving compared to most other DIN rail models. They can either be supplied factory ranged or alternatively ranged by the end user ...
TxBlock and TxRail are fully programmable temperature transmitters dedicated to PT100 and thermocouple industrial sensors with configurable working ranges. The TxBlock is a head mount unit and provides a 4-20mA outputs, the TxRail is a DIN rail mount unit and there are options for a 4-20mA and 0-10V outputs. Both ...
The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and thermocouples into a HART system. All units are ATEX approved for Zone 2 environments, including the power rail and power control units. ...
PR 3300 Series Loop-Powered Temperature Converters
The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART 7 protocol unit that allow for integrating PT100 and thermocouples into a HART system. HART 7 revision protocol allows for extended programming. All units are ...
2914 2-Wire Room Temperature Transmitter
Wall-mounted room temperature transmitter. The unit comes complete with PT100 sensor and 4-20mA output transmitter via a 2-wire connection. Easily mounted and suitable for a temperature range 0-70C and a power supply 8-35vDC. ...
5131 2-Wire Programmable Transmitter
The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved ...
5331 2-Wire Programmable Transmitter
The 5331 is an extremely high accuracy sensor head mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt requires a 7.2 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated ...
5333 2-Wire Programmable Transmitter
The 5333 is an extremely high accuracy sensor head mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt requires a 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit has the option of ...
5334 2-Wire Programmable Transmitter
The 5334 is an extremely high accuracy sensor head mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal can be linear to the value of the input value. The unt requires a 7.2 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions. ...
5335 2-Wire Transmitter with HART 5 Protocol
The 5335 is an extremely high accuracy sensor head mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt requires a 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The ...
5337 2-Wire Transmitter with HART 7 Protocol
The 5337 is an extremely high accuracy sensor head mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The 5337 will also accept inputs from 2 RTD or TC sensors and provide a 4-20mA output ...
5343 2-Wire Programmable Level Transmitter
The 5343 is a sensor head mounting programmable transmitters suitable for Potentiometer, Thermistors or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the input. The unt requires a 8 to 35vDC power supply and can be mounted in a sensor head or DIN rail mounted. The unit is galvanically isolated and has the option of intrinsically safe versions, 5343B. ...
6331 2-Wire Programmable Transmitter
The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...
6333 2-Wire Programmable Transmitter
The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions. ...
6334 2-Wire Programmable Transmitter
The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...
6335 2-Wire Transmitter with HART 5 Protocol
The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...
6337 2-Wire Transmitter with HART 7 Protocol
The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors and provide a 4-20mA output with individual, difference or average temperature measurements. The unit requires a 8 to 35vDC power supply and can be mounted ...
9113 Temperature/mA Converter
Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant ...
Isolated Temperature Transmitter TxIsoRail
The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC by RS-232 port. The units also accept, 0-50mV, 0-10v, 0-20mA and 4-20mA input signals and can be used as signal amplifiers or isolators. ...
OmniAmp Inline RTD Signal Converter
The OmniAmp inline temperature transmitter converts PT1000 or PT100 RTD inputs to a 4-20mA or MODBUS RS485 signal output. ...
Smart Temperature Transmitters ISOLATED TxIsoBlock & TxIsoRail
TxIsoBlock and TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. TxIsoBlock is a head mount unit and TxIsoRail is a DIN rail mount unit. Both units can be easily configured by the user for input type and working range by means of an interface cable connected to a PC by a RS-232 or USB port. The TxIsoRail units also accept, 0-50mV, 0-10v and 4-20mA input signals and can be ...
TDMTC Slimline Fast Response Thermocouple Transmitter
Slim-line microprocessor based, fully isolated DIN rail mounted thermocouple transmitters for K, T and J type sensors. The body is a tiny 6.2mm thick - a huge space saving compared to most other DIN rail models. They can either be supplied factory ranged or alternatively ranged by the end user for specific applications by dip switches on the device. An optional bus adaptor is available enabling hot swapping and requiring only one power supply for ...
Temperature Transmitters TxBlock & TxRail
TxBlock and TxRail are fully programmable temperature transmitters dedicated to PT100 and thermocouple industrial sensors with configurable working ranges. The TxBlock is a head mount unit and provides a 4-20mA outputs, the TxRail is a DIN rail mount unit and there are options for a 4-20mA and 0-10V outputs. Both units can be easily configured by the user using the TxConfig software and USB lead. The TxRail units also accept, 0-50mV, 0-10v and 0-20mA input ...
3100 Slim Series of 6mm Temperature Transmitters
The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and ...
PR 3300 Series Loop-Powered Temperature Converters
The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART ...
Wall-mounted room temperature transmitter. The unit comes complete with PT100 sensor and 4-20mA output transmitter via a 2-wire connection. Easily mounted and suitable for a temperature range 0-70C and a power supply 8-35vDC. ...
The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved ...
The 5331 is an extremely high accuracy sensor head mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The ...
The 5333 is an extremely high accuracy sensor head mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that influences the input. The unt ...
The 5334 is an extremely high accuracy sensor head mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal can be linear to the value of the input value. The unt requires a 7.2 to 35vDC power supply and ...
The 5335 is an extremely high accuracy sensor head mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the temperature or resistance value that ...
The 5337 is an extremely high accuracy sensor head mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the value of the ...
The 5343 is a sensor head mounting programmable transmitters suitable for Potentiometer, Thermistors or Ohm inputs. The transmitters converts the inputs into a 4-20mA output. The output signal is proportional and linear to the input. The unt requires a 8 to 35vDC power supply and can be mounted in a ...
The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. ...
The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit ...
The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can ...
The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on ...
The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors ...
Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant ...
The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC ...
Smart Temperature Transmitters ISOLATED TxIsoBlock & TxIsoRail
TxIsoBlock and TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. TxIsoBlock is a head mount unit and TxIsoRail is a DIN rail mount unit. Both units can be easily configured by the user for input type and working range by means of an interface ...
TDMTC Slimline Fast Response Thermocouple Transmitter
Slim-line microprocessor based, fully isolated DIN rail mounted thermocouple transmitters for K, T and J type sensors. The body is a tiny 6.2mm thick - a huge space saving compared to most other DIN rail models. They can either be supplied factory ranged or alternatively ranged by the end user ...
TxBlock and TxRail are fully programmable temperature transmitters dedicated to PT100 and thermocouple industrial sensors with configurable working ranges. The TxBlock is a head mount unit and provides a 4-20mA outputs, the TxRail is a DIN rail mount unit and there are options for a 4-20mA and 0-10V outputs. Both ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
