omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content

Temperature Transmitters

Edit Content

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and ...

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART ...

2914 2-Wire Room Temperature Transmitter

Wall-mounted room temperature transmitter. The unit comes complete with PT100 sensor and 4-20mA output transmitter via a 2-wire connection. Easily mounted and suitable for a temperature range 0-70C and a power supply 8-35vDC. ...

5131 2-Wire Programmable Transmitter

The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved ...

PR 5331 2-Wire Programmable Transmitter

The PR 5331 offers the most flexibility in the PR range of head-mounted transmitters. The PR 5331 is a universal input device, accepting RTD, Thermocouples, Linear Resistance and Bi-Polar mV signals. This broad capability offers significant advantages, allowing for a single transmitter type to be stocked for multiple applications, thereby ...

PR 5332 2-Wire Programmable RTD Transmitter

The PR 5332 is designed to convert 2-, 3-, or 4-Wire RTD and linear resistance measurements to a linearised 4-20mA signal. The PR 5332 can handle inputs from PT100, PT1000 and Ni100, Ni1000 sensors and resistances up to 5,000Ω. The PR 5332 is engineered for superior performance, featuring an impressive ...

PR 5333 2-Wire Programmable Transmitter

The PR 5333 is a specialised RTD and resistance transmitter engineered for applications demanding rapid response and higher resistance measurement. The unit features a faster response time, ensuring quick and accurate signal conversion from RTD sensors.While it offers a slightly lower accuracy than the PR 5332, its enhanced capabilities are ...

PR 5334 2-Wire Programmable Transmitter

The PR 5334 is a 2-wire transmitter designed for precise thermocouple and mV signal conversion, making it a perfect fit for a variety of specific applications. Its ability to accept both thermocouple temperature inputs and mV signals in a single, compact unit makes it uniquely suited for solar panel monitoring, ...

PR 5335 2-Wire Transmitter with HART 5 Protocol

The PR 5335 is a universal 2-wire temperature transmitter with embedded HART 5 protocol, offering a powerful combination of analogue and digital communication. It is designed to convert a wide range of inputs—including RTD, thermocouple, linear resistance, and bipolar mV signals—into a standard 4-20mA output. The HART 5 protocol is ...

PR 5337 2-Wire Transmitter with HART 7 Protocol

The PR 5337 is a universal 2-wire temperature transmitter that combines exceptional versatility with the latest HART communication technology. It converts a wide range of inputs—including RTD, thermocouple, linear resistance, and bipolar mV signals—into a standard 4-20mA output. Its key differentiator is the user-selectable HART protocol, allowing it to operate ...

PR 5343 2-Wire Programmable Level Transmitter

The PR 5343 is a 2-wire transmitter designed for highly accurate resistance measurement, a function that makes it a dedicated level transmitter. It is a cost-effective solution for converting linear or non-linear resistance variations into a standard 4-20mA output. Its core applications involve measuring ...

PR 5437 2-Wire HART 7 Temperature Transmitter

The PR 5437 is a high-end, 2-wire universal HART temperature transmitter designed for the most critical and demanding applications. It sets itself apart with a "true dual input" design, featuring a high-density 7-terminal configuration that allows it to accept a wide variety of sensor combinations, including ...

PR 5450 Profibus PA Transmitter

The PR 5450 is a high-performance PROFIBUS PA temperature transmitter designed for demanding industrial environments. It provides universal input capability for a wide range of RTD, thermocouple, mV, and resistance sensors, making it an extremely versatile and valuable asset for digital bus networks. A key feature is its true dual-input ...

6331 2-Wire Programmable Transmitter

The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. ...

6333 2-Wire Programmable Transmitter

The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit ...

6334 2-Wire Programmable Transmitter

The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can ...

6335 2-Wire Transmitter with HART 5 Protocol

The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on ...

6337 2-Wire Transmitter with HART 7 Protocol

The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors ...

9113 Temperature/mA Converter

Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant ...

Isolated Temperature Transmitter TxIsoRail

The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC ...

Field Mounted DigiRail Modules

OmniAmp Inline RTD Signal Converter

The OmniAmp inline temperature transmitter converts PT1000 or PT100 RTD inputs to a 4-20mA or MODBUS RS485 signal output. ...

OmniAmp Inline RTD Transmitter

The OmniAmp inline temperature transmitter converts PT1000 or PT100 RTD inputs to a 4-20mA or Modbus RS485 signal output. ...

Smart Temperature Transmitters ISOLATED TxIsoBlock & TxIsoRail

TxIsoBlock and TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. TxIsoBlock is a head mount unit and TxIsoRail is a DIN rail mount unit. Both units can be easily configured by the user for input type and working range by means of an interface ...
Edit Content

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and thermocouples into a HART system. All units are ATEX approved for Zone 2 environments, including the power rail and power control units. ...

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART 7 protocol unit that allow for integrating PT100 and thermocouples into a HART system. HART 7 revision protocol allows for extended programming. All units are ...

2914 2-Wire Room Temperature Transmitter

Wall-mounted room temperature transmitter. The unit comes complete with PT100 sensor and 4-20mA output transmitter via a 2-wire connection. Easily mounted and suitable for a temperature range 0-70C and a power supply 8-35vDC. ...

5131 2-Wire Programmable Transmitter

The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved ...

PR 5331 2-Wire Programmable Transmitter

The PR 5331 offers the most flexibility in the PR range of head-mounted transmitters. The PR 5331 is a universal input device, accepting RTD, Thermocouples, Linear Resistance and Bi-Polar mV signals. This broad capability offers significant advantages, allowing for a single transmitter type to be stocked for multiple applications, thereby drastically simplifying inventory management and reducing maintenance overhead. Beyond its versatility, the PR 5331 is engineered for superior performance, featuring an impressive measurement accuracy of ...

PR 5332 2-Wire Programmable RTD Transmitter

The PR 5332 is designed to convert 2-, 3-, or 4-Wire RTD and linear resistance measurements to a linearised 4-20mA signal. The PR 5332 can handle inputs from PT100, PT1000 and Ni100, Ni1000 sensors and resistances up to 5,000Ω. The PR 5332 is engineered for superior performance, featuring an impressive measurement accuracy of better than 0.05% of the selected range, ensuring dependable and precise signal conversion to a standard 4-20mA current output. Its robust design ...

PR 5333 2-Wire Programmable Transmitter

The PR 5333 is a specialised RTD and resistance transmitter engineered for applications demanding rapid response and higher resistance measurement. The unit features a faster response time, ensuring quick and accurate signal conversion from RTD sensors.While it offers a slightly lower accuracy than the PR 5332, its enhanced capabilities are tailored for specific industrial needs. It also accommodates a higher resistance range, expanding its utility for a broader scope of resistive sensors. Crucially, the PR ...

PR 5334 2-Wire Programmable Transmitter

The PR 5334 is a 2-wire transmitter designed for precise thermocouple and mV signal conversion, making it a perfect fit for a variety of specific applications. Its ability to accept both thermocouple temperature inputs and mV signals in a single, compact unit makes it uniquely suited for solar panel monitoring, where it can handle both pyranometer output and ambient temperature measurements using thermocouples. With integrated galvanic isolation, high measurement accuracy, and NAMUR NE43/NE21 sensor error ...

PR 5335 2-Wire Transmitter with HART 5 Protocol

The PR 5335 is a universal 2-wire temperature transmitter with embedded HART 5 protocol, offering a powerful combination of analogue and digital communication. It is designed to convert a wide range of inputs—including RTD, thermocouple, linear resistance, and bipolar mV signals—into a standard 4-20mA output. The HART 5 protocol is superimposed on this signal, allowing for remote configuration, calibration, and diagnostics using a HART-compatible host or handheld communicator. This provides the dual benefits of reliable ...

PR 5337 2-Wire Transmitter with HART 7 Protocol

The PR 5337 is a universal 2-wire temperature transmitter that combines exceptional versatility with the latest HART communication technology. It converts a wide range of inputs—including RTD, thermocouple, linear resistance, and bipolar mV signals—into a standard 4-20mA output. Its key differentiator is the user-selectable HART protocol, allowing it to operate in either HART 5 or the more advanced HART 7 mode. This flexibility makes the PR 5337 a future-proof investment, as it can be deployed ...

PR 5343 2-Wire Programmable Level Transmitter

The PR 5343 is a 2-wire transmitter designed for highly accurate resistance measurement, a function that makes it a dedicated level transmitter. It is a cost-effective solution for converting linear or non-linear resistance variations into a standard 4-20mA output. Its core applications involve measuring signals from Ohmic level sensors or valve positions, which rely on resistance changes to indicate position or level. With its unique process calibration ...

PR 5437 2-Wire HART 7 Temperature Transmitter

The PR 5437 is a high-end, 2-wire universal HART temperature transmitter designed for the most critical and demanding applications. It sets itself apart with a "true dual input" design, featuring a high-density 7-terminal configuration that allows it to accept a wide variety of sensor combinations, including two 4-wire RTDs. This enables advanced features like sensor redundancy, which provides an automatic backup in case of primary sensor failure, and sensor ...

PR 5450 Profibus PA Transmitter

The PR 5450 is a high-performance PROFIBUS PA temperature transmitter designed for demanding industrial environments. It provides universal input capability for a wide range of RTD, thermocouple, mV, and resistance sensors, making it an extremely versatile and valuable asset for digital bus networks. A key feature is its true dual-input functionality, which enables sensor redundancy and drift detection. This allows for proactive maintenance and ensures continuous, reliable operation in critical applications. With exceptional accuracy, robust ...

6331 2-Wire Programmable Transmitter

The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...

6333 2-Wire Programmable Transmitter

The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions. ...

6334 2-Wire Programmable Transmitter

The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...

6335 2-Wire Transmitter with HART 5 Protocol

The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...

6337 2-Wire Transmitter with HART 7 Protocol

The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors and provide a 4-20mA output with individual, difference or average temperature measurements. The unit requires a 8 to 35vDC power supply and can be mounted ...

9113 Temperature/mA Converter

Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant ...

Isolated Temperature Transmitter TxIsoRail

The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC by RS-232 port. The units also accept, 0-50mV, 0-10v, 0-20mA and 4-20mA input signals and can be used as signal amplifiers or isolators. ...

Field Mounted DigiRail Modules

OmniAmp Inline RTD Signal Converter

The OmniAmp inline temperature transmitter converts PT1000 or PT100 RTD inputs to a 4-20mA or MODBUS RS485 signal output. ...

OmniAmp Inline RTD Transmitter

The OmniAmp inline temperature transmitter converts PT1000 or PT100 RTD inputs to a 4-20mA or Modbus RS485 signal output. ...

Smart Temperature Transmitters ISOLATED TxIsoBlock & TxIsoRail

TxIsoBlock and TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. TxIsoBlock is a head mount unit and TxIsoRail is a DIN rail mount unit. Both units can be easily configured by the user for input type and working range by means of an interface cable connected to a PC by a RS-232 or USB port. The TxIsoRail units also accept, 0-50mV, 0-10v and 4-20mA input signals and can be ...

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and ...

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART ...

2914 2-Wire Room Temperature Transmitter

Wall-mounted room temperature transmitter. The unit comes complete with PT100 sensor and 4-20mA output transmitter via a 2-wire connection. Easily mounted and suitable for a temperature range 0-70C and a power supply 8-35vDC. ...

5131 2-Wire Programmable Transmitter

The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved ...

PR 5331 2-Wire Programmable Transmitter

The PR 5331 offers the most flexibility in the PR range of head-mounted transmitters. The PR 5331 is a universal input device, accepting RTD, Thermocouples, Linear Resistance and Bi-Polar mV signals. This broad capability offers significant advantages, allowing for a single transmitter type to be stocked for multiple applications, thereby ...

PR 5332 2-Wire Programmable RTD Transmitter

The PR 5332 is designed to convert 2-, 3-, or 4-Wire RTD and linear resistance measurements to a linearised 4-20mA signal. The PR 5332 can handle inputs from PT100, PT1000 and Ni100, Ni1000 sensors and resistances up to 5,000Ω. The PR 5332 is engineered for superior performance, featuring an impressive ...

PR 5333 2-Wire Programmable Transmitter

The PR 5333 is a specialised RTD and resistance transmitter engineered for applications demanding rapid response and higher resistance measurement. The unit features a faster response time, ensuring quick and accurate signal conversion from RTD sensors.While it offers a slightly lower accuracy than the PR 5332, its enhanced capabilities are ...

PR 5334 2-Wire Programmable Transmitter

The PR 5334 is a 2-wire transmitter designed for precise thermocouple and mV signal conversion, making it a perfect fit for a variety of specific applications. Its ability to accept both thermocouple temperature inputs and mV signals in a single, compact unit makes it uniquely suited for solar panel monitoring, ...

PR 5335 2-Wire Transmitter with HART 5 Protocol

The PR 5335 is a universal 2-wire temperature transmitter with embedded HART 5 protocol, offering a powerful combination of analogue and digital communication. It is designed to convert a wide range of inputs—including RTD, thermocouple, linear resistance, and bipolar mV signals—into a standard 4-20mA output. The HART 5 protocol is ...

PR 5337 2-Wire Transmitter with HART 7 Protocol

The PR 5337 is a universal 2-wire temperature transmitter that combines exceptional versatility with the latest HART communication technology. It converts a wide range of inputs—including RTD, thermocouple, linear resistance, and bipolar mV signals—into a standard 4-20mA output. Its key differentiator is the user-selectable HART protocol, allowing it to operate ...

PR 5343 2-Wire Programmable Level Transmitter

The PR 5343 is a 2-wire transmitter designed for highly accurate resistance measurement, a function that makes it a dedicated level transmitter. It is a cost-effective solution for converting linear or non-linear resistance variations into a standard 4-20mA output. Its core applications involve measuring ...

PR 5437 2-Wire HART 7 Temperature Transmitter

The PR 5437 is a high-end, 2-wire universal HART temperature transmitter designed for the most critical and demanding applications. It sets itself apart with a "true dual input" design, featuring a high-density 7-terminal configuration that allows it to accept a wide variety of sensor combinations, including ...

PR 5450 Profibus PA Transmitter

The PR 5450 is a high-performance PROFIBUS PA temperature transmitter designed for demanding industrial environments. It provides universal input capability for a wide range of RTD, thermocouple, mV, and resistance sensors, making it an extremely versatile and valuable asset for digital bus networks. A key feature is its true dual-input ...

6331 2-Wire Programmable Transmitter

The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. ...

6333 2-Wire Programmable Transmitter

The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit ...

6334 2-Wire Programmable Transmitter

The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can ...

6335 2-Wire Transmitter with HART 5 Protocol

The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on ...

6337 2-Wire Transmitter with HART 7 Protocol

The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors ...

9113 Temperature/mA Converter

Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant ...

Isolated Temperature Transmitter TxIsoRail

The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC ...

Field Mounted DigiRail Modules

OmniAmp Inline RTD Signal Converter

The OmniAmp inline temperature transmitter converts PT1000 or PT100 RTD inputs to a 4-20mA or MODBUS RS485 signal output. ...

OmniAmp Inline RTD Transmitter

The OmniAmp inline temperature transmitter converts PT1000 or PT100 RTD inputs to a 4-20mA or Modbus RS485 signal output. ...

Smart Temperature Transmitters ISOLATED TxIsoBlock & TxIsoRail

TxIsoBlock and TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. TxIsoBlock is a head mount unit and TxIsoRail is a DIN rail mount unit. Both units can be easily configured by the user for input type and working range by means of an interface ...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Enquire now