Orphans

Used to hold any categories that don’t fit anywhere else. Hides these from the main category list.

Grid View
List View

FS-1100-Hire

The Spectrex Sharpeye IR3 Flame Simulator is available for hire. Operating Temperature Range 0 to 50°C. Power Supply: 14.8V (4 x 3.7V Rechargeable Lithium-ion Batteries. The unit is ATEX and IECEx approved. Ex II 2 G, Ex db ib op is IIB + H2 T5 Gb. Heavy duty Aluminium, black..

190P Portable Clamp-On Ultrasonic Flow Meter Hire

Hand held microprocessor based clamp-on ultrasonic flow meter, with graphical display of data, data logger, RS232, USB, on board help, automatic speed of sound measurement and flow profile correction algorithm. Available with transducers for pipe sizes 15 - 1200mm and temperatures up to 105°C. Suitable for water, oil, chemicals in..

TGE-HIRE

Tinytag Energy Logger Hire Unit, TGE-HIRE. Suitable for monitoring single and three phase power supplies. Ranges Current 0-2000A AC RMS, Voltage 200-250vAC with 2% accuracy. Units are supplied in a carry case with three rogowski current coils (85mm internal loop diameter), UK mains leads, a USB cable, a copy of..

All-In-One Measurement System – AMS42-LAN16fx

The AMS42-LAN16fx features 16 analogue Inputs. 8 amplified inputs with 16 Bit resolution and 250kHz total sampling rate and 8 unamplified inputs via a D-Sub 37-pin connector. 32 Digital Inputs/Outputs (three 32-bit counters) all connected to a LAN network using a TCP/IP protocol to provide a safe and complete data..

All-In-One Measurement System – AMS42-USB

The AMS42-USB features 16 analogue Inputs. 8 amplified inputs with 16 Bit resolution and 250kHz total sampling rate and 8 unamplified inputs via a D-Sub 37-pin connector. 8 Digital Inputs/Outputs (one 32-bit counters) all connected to a PC via a USB connection. The modular design of the AMS42-USB allows each..

All-In-One Measurement System – AMS84-LAN16fx

The AMS84-LAN16fx features 16 analogue Inputs. 16 amplified inputs with 16 Bit resolution and 250kHz total sampling rate. 32 Digital Inputs/Outputs (three 32-bit counters) all connected to a LAN network using a TCP/IP protocol to provide a safe and complete data transmission over long distances. The modular design of the..

All-In-One Measurement System – AMS84-USB

The AMS84-USB features 16 analogue Inputs with 16 Bit resolution and 250kHz total sampling rate. 8 Digital Inputs/Outputs (one 32-bit counters) all connected to a PC via a USB connection. The modular design of the AMS84-USB allows each amplified input to be on individual AMS-K cassettes with individual 5B Amplifiers..

AMS System Cassettes – AMS-K

The AMS-K are a range of plug-in cassettes with different connectors on the front panel depending on the sensor, or signal, to be connected. The suitable cassette can be connected to a 5B module to provide a range of different options for connection and inputs. The AMS-K will will connect..

BD 11E / BD12E

The BD 11E / BD 12E line of instruments is based on a proven robust and reliable design that is recognised world-wide as being the standard in recording. All models have differential inputs with constant impedance over all input ranges which allow for accurate measurements from almost any source. The..

BD300 Chart Recorders

The BD 300 is a general purpose measurement recorder in 4, 6 and 8 pen versions for measuring voltage AC/DC, current AC/DC, temperature and frequency. Applications include scientific, laboratory, transport and industrial environments...

BMCM Connection Boards and Backplanes

16 way connection boards suitable for use with the LAN and USB AD16F, USB-AD12F, and USB-AD acquisition units and backplanes for housing amplifiers..

BMCM Network DAQ System for LAN Networks (TCP/IP) – LAN-AD16fx

The LAN-AD16fx features 16 Analogue Inputs (selectable ranges of 1V, 2V, 5V, 10V, with a 250kHz total sampling rate and 16 Bit resolution), 2 Analogue Outputs (10V, with 16 bit resolution), 32 digital I/O channels (3 of which can be configured as 32-bit counters) all connected to a LAN network..

BMCM NEXTView Measurement Software for Data Acquisition & Analysis

The Nextview software allows you to visualize, control, automate, configure, scan, analyze and document with one software. You can implement your measurement applications completely without any programming efforts. The full version features all functions of the software. The NextView 4 software is suitable for 32-Bit systems and the NextView5 software..

BMCM USB DAQ System – USB-AD

The USB-AD features 16 Analogue Inputs (5V, 10Hz Sampling rate, with 12 Bit resolution), 1 Analogue Output (5V, with 12 bit resolution), 4 Digital inputs and 4 digital outputs all connected to a PC via a USB connection. Up to 127 devices can be integrated together...

BMCM USB DAQ System – USB-AD14F USB Powered DAQ Unit

The USB-AD14F features 16 Analogue Inputs (±10V, 20kHz Sampling rate, with 14 Bit resolution), 1 Analogue Outputs (±5V, with 12 bit resolution), 8 digital inputs and 8 digital outputs (first can be configured as a 16-bit counter) all connected to a PC via a USB connection. Up to 127 devices..

BMCM USB DAQ System – USB-PIO

The USB-PIO features 24 Digital TTL Channels via a 25-pin D-Sub female connector to a PC via a USB connection. The data acquisition system is accommodated in the D-Sub connector housing. Suitable for Windows 8.1 and 10 in 64-Bit...

DT80 Data Logger Hire

The Datataker DT80 series stand alone data logger, can be mains or battery powered, with 5-15 analogue inputs ( universal input type ), 12 digital I/O, CAN bus serial input, USB memory up to 512 MB ( 50 million readings ), Logging rates 25 Hz to 99 days. Unit has..

DT82E Data Logger Hire

The dataTaker DT82E is a smart data logger designed especially for environmental monitoring. The DT82E is a robust, low power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display...

DT82i Data Logger Hire

The Datataker DT82I smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT82I is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The..

DT85 Data Logger Hire

Datataker DT85 series stand alone data logger, mains or battery powered, with 16-48 analogue inputs ( universal input type ), 12 digital I/O, MODbus and SDI-12 serial input, USB memory up to 512 MB ( 50 million readings ), Logging rates 25 Hz to 99 days. Unit has an internal..

FS-1400-HIRE

Hire of a Spectrex Sharpeye FS-1400 Multi IR4 (H2) Flame Simulator. Operating Temperature Range 0 to 50°C. Power Supply: 14.8V (4 x 3.7V Rechargeable Lithium-ion Batteries. The unit is ATEX and IECEx approved. Ex II 2 G, Ex db ib op is IIB + H2 T5 Gb. Heavy duty Aluminium,..

GL220 Data Logger Hire

The GL220 is the next generation midi logger following on from the success of the GL200 & GL200A models. With 10 fully isolated multi-function inputs, large internal 2GB Flash memory and a port for an external USB stick memory, this logger has significantly more memory than it predecessors. The USB..

Input Scaling Modules for XR440/XR450 Data Logger

Input scaling modules for use with the XR440 and XR450 data loggers from Pace Scientific. The modules are factory calibrated to allow the XR440, or XR450, pocket logger to accept a wide range of different voltage and mA current input signals. Each individual input channel can be configured for the..

Pace AC Current & AC Voltage Sensors

Self powered AC current and AC voltage sensors. Easy to install and work with a large range of data loggers and monitoring systems including the Pace XR5 and XR440 range. The SC Series of split core current sensors are available with a 0-5vDC output and cover current ranges up to..

FS-1100-Hire

The Spectrex Sharpeye IR3 Flame Simulator is available for hire. Operating Temperature Range 0 to 50°C. Power Supply: 14.8V (4 x 3.7V Rechargeable Lithium-ion Batteries. The unit is ATEX and IECEx approved. Ex II 2 G, Ex db ib op is IIB + H2 T5 Gb. Heavy duty Aluminium, black painting. Dimensions 230 x 185 x 136mm, weight 2.5Kg. The FS-1100-HIRE Flame Simulator Hire Kit includes the FS-1100 Flame Simulator, battery, charger, tool kit and ...

190P Portable Clamp-On Ultrasonic Flow Meter Hire

Hand held microprocessor based clamp-on ultrasonic flow meter, with graphical display of data, data logger, RS232, USB, on board help, automatic speed of sound measurement and flow profile correction algorithm. Available with transducers for pipe sizes 15 - 1200mm and temperatures up to 105°C. Suitable for water, oil, chemicals in most pipe materials. ...

TGE-HIRE

Tinytag Energy Logger Hire Unit, TGE-HIRE. Suitable for monitoring single and three phase power supplies. Ranges Current 0-2000A AC RMS, Voltage 200-250vAC with 2% accuracy. Units are supplied in a carry case with three rogowski current coils (85mm internal loop diameter), UK mains leads, a USB cable, a copy of the Tinytag Explorer software and a user manual. Hire Per week. ...

All-In-One Measurement System – AMS42-LAN16fx

The AMS42-LAN16fx features 16 analogue Inputs. 8 amplified inputs with 16 Bit resolution and 250kHz total sampling rate and 8 unamplified inputs via a D-Sub 37-pin connector. 32 Digital Inputs/Outputs (three 32-bit counters) all connected to a LAN network using a TCP/IP protocol to provide a safe and complete data transmission over long distances. The modular design of the AMS42-LAN16fx allows each amplified input to be on individual AMS-K cassettes with individual 5B Amplifiers to ...

All-In-One Measurement System – AMS42-USB

The AMS42-USB features 16 analogue Inputs. 8 amplified inputs with 16 Bit resolution and 250kHz total sampling rate and 8 unamplified inputs via a D-Sub 37-pin connector. 8 Digital Inputs/Outputs (one 32-bit counters) all connected to a PC via a USB connection. The modular design of the AMS42-USB allows each amplified input to be on individual AMS-K cassettes with individual 5B Amplifiers to optimism to specific requirements. The unit comes in a robust table top ...

All-In-One Measurement System – AMS84-LAN16fx

The AMS84-LAN16fx features 16 analogue Inputs. 16 amplified inputs with 16 Bit resolution and 250kHz total sampling rate. 32 Digital Inputs/Outputs (three 32-bit counters) all connected to a LAN network using a TCP/IP protocol to provide a safe and complete data transmission over long distances. The modular design of the AMS84-LAN16fx allows each amplified input to be on individual AMS-K cassettes with individual 5B Amplifiers to optimism to specific requirements. The unit comes in a ...

All-In-One Measurement System – AMS84-USB

The AMS84-USB features 16 analogue Inputs with 16 Bit resolution and 250kHz total sampling rate. 8 Digital Inputs/Outputs (one 32-bit counters) all connected to a PC via a USB connection. The modular design of the AMS84-USB allows each amplified input to be on individual AMS-K cassettes with individual 5B Amplifiers to optimism to specific requirements. The unit comes in a robust Aluminium housing as a stationary 19" rack system. ...

AMS System Cassettes – AMS-K

The AMS-K are a range of plug-in cassettes with different connectors on the front panel depending on the sensor, or signal, to be connected. The suitable cassette can be connected to a 5B module to provide a range of different options for connection and inputs. The AMS-K will will connect to any of the AMS42 and AMS84 units to provide a system with 8 or 16 analogue inputs with a wide range of inputs and ...

BD 11E / BD12E

The BD 11E / BD 12E line of instruments is based on a proven robust and reliable design that is recognised world-wide as being the standard in recording. All models have differential inputs with constant impedance over all input ranges which allow for accurate measurements from almost any source. The high sensitivity (up to 400 micro Volt full scale) and gilded input contacts allow even very low voltages to be measured accurately. ...

BD300 Chart Recorders

The BD 300 is a general purpose measurement recorder in 4, 6 and 8 pen versions for measuring voltage AC/DC, current AC/DC, temperature and frequency. Applications include scientific, laboratory, transport and industrial environments. ...

BMCM Connection Boards and Backplanes

16 way connection boards suitable for use with the LAN and USB AD16F, USB-AD12F, and USB-AD acquisition units and backplanes for housing amplifiers ...

BMCM Network DAQ System for LAN Networks (TCP/IP) – LAN-AD16fx

The LAN-AD16fx features 16 Analogue Inputs (selectable ranges of 1V, 2V, 5V, 10V, with a 250kHz total sampling rate and 16 Bit resolution), 2 Analogue Outputs (10V, with 16 bit resolution), 32 digital I/O channels (3 of which can be configured as 32-bit counters) all connected to a LAN network using a TCP/IP protocol to provide a safe and complete data transmission over long distances. Several DAQ systems can be integrated into a single network ...

BMCM NEXTView Measurement Software for Data Acquisition & Analysis

The Nextview software allows you to visualize, control, automate, configure, scan, analyze and document with one software. You can implement your measurement applications completely without any programming efforts. The full version features all functions of the software. The NextView 4 software is suitable for 32-Bit systems and the NextView5 software is compatible with the latest 64-Bit computers. ...

BMCM USB DAQ System – USB-AD

The USB-AD features 16 Analogue Inputs (5V, 10Hz Sampling rate, with 12 Bit resolution), 1 Analogue Output (5V, with 12 bit resolution), 4 Digital inputs and 4 digital outputs all connected to a PC via a USB connection. Up to 127 devices can be integrated together. ...

BMCM USB DAQ System – USB-AD14F USB Powered DAQ Unit

The USB-AD14F features 16 Analogue Inputs (±10V, 20kHz Sampling rate, with 14 Bit resolution), 1 Analogue Outputs (±5V, with 12 bit resolution), 8 digital inputs and 8 digital outputs (first can be configured as a 16-bit counter) all connected to a PC via a USB connection. Up to 127 devices can be integrated together. The digital inputs and outputs are not galvanically isolated but have a 1kOhm resistor to provide protection. ...

BMCM USB DAQ System – USB-PIO

The USB-PIO features 24 Digital TTL Channels via a 25-pin D-Sub female connector to a PC via a USB connection. The data acquisition system is accommodated in the D-Sub connector housing. Suitable for Windows 8.1 and 10 in 64-Bit. ...

DT80 Data Logger Hire

The Datataker DT80 series stand alone data logger, can be mains or battery powered, with 5-15 analogue inputs ( universal input type ), 12 digital I/O, CAN bus serial input, USB memory up to 512 MB ( 50 million readings ), Logging rates 25 Hz to 99 days. Unit has an internal memory of 5,000,000 readings. DT80 can also publish data directly to the web. ...

DT82E Data Logger Hire

The dataTaker DT82E is a smart data logger designed especially for environmental monitoring. The DT82E is a robust, low power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display. ...

DT82i Data Logger Hire

The Datataker DT82I smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT82I is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The Datataker DT82Is Dual Channel concept allows up to 4 isolated or 6 common referenced analog inputs to be used in many combinations. With support for ...

DT85 Data Logger Hire

Datataker DT85 series stand alone data logger, mains or battery powered, with 16-48 analogue inputs ( universal input type ), 12 digital I/O, MODbus and SDI-12 serial input, USB memory up to 512 MB ( 50 million readings ), Logging rates 25 Hz to 99 days. Unit has an internal memory of 5,000,000 readings. Serial, USB and ethernet connection, with web server. ...

FS-1400-HIRE

Hire of a Spectrex Sharpeye FS-1400 Multi IR4 (H2) Flame Simulator. Operating Temperature Range 0 to 50°C. Power Supply: 14.8V (4 x 3.7V Rechargeable Lithium-ion Batteries. The unit is ATEX and IECEx approved. Ex II 2 G, Ex db ib op is IIB + H2 T5 Gb. Heavy duty Aluminium, black painting. Dimensions 230 x 185 x 136mm, weight 2.5Kg. The Flame Simulator Kit includes the FS-1400 Flame Simulator, battery, charger, tool kit and user ...

GL220 Data Logger Hire

The GL220 is the next generation midi logger following on from the success of the GL200 & GL200A models. With 10 fully isolated multi-function inputs, large internal 2GB Flash memory and a port for an external USB stick memory, this logger has significantly more memory than it predecessors. The USB memory stick can also be exchanged during logging without any lost of data. ...

Input Scaling Modules for XR440/XR450 Data Logger

Input scaling modules for use with the XR440 and XR450 data loggers from Pace Scientific. The modules are factory calibrated to allow the XR440, or XR450, pocket logger to accept a wide range of different voltage and mA current input signals. Each individual input channel can be configured for the following:- -5 to +5vDC, 0-10vDC, 0-20vDC, 0-30vDC, 0-60vDC, 4-20mA (also 0-20mA) or the standard 0-5vDC suitable for all Pace Scientific sensor inputs. Modules plug directly ...

Pace AC Current & AC Voltage Sensors

Self powered AC current and AC voltage sensors. Easy to install and work with a large range of data loggers and monitoring systems including the Pace XR5 and XR440 range. The SC Series of split core current sensors are available with a 0-5vDC output and cover current ranges up to 1,500A. The AC voltage sensors cover voltage ranges of 0-300vAC and 0-600vAC, both are self powered and generate a 0-5vDC output. ...

Used to hold any categories that don’t fit anywhere else. Hides these from the main category list.

FS-1100-Hire

The Spectrex Sharpeye IR3 Flame Simulator is available for hire. Operating Temperature Range 0 to 50°C. Power Supply: 14.8V (4 x 3.7V Rechargeable Lithium-ion Batteries. The unit is ATEX and IECEx approved. Ex II 2 G, Ex db ib op is IIB + H2 T5 Gb. Heavy duty Aluminium, black..

190P Portable Clamp-On Ultrasonic Flow Meter Hire

Hand held microprocessor based clamp-on ultrasonic flow meter, with graphical display of data, data logger, RS232, USB, on board help, automatic speed of sound measurement and flow profile correction algorithm. Available with transducers for pipe sizes 15 - 1200mm and temperatures up to 105°C. Suitable for water, oil, chemicals in..

TGE-HIRE

Tinytag Energy Logger Hire Unit, TGE-HIRE. Suitable for monitoring single and three phase power supplies. Ranges Current 0-2000A AC RMS, Voltage 200-250vAC with 2% accuracy. Units are supplied in a carry case with three rogowski current coils (85mm internal loop diameter), UK mains leads, a USB cable, a copy of..

All-In-One Measurement System – AMS42-LAN16fx

The AMS42-LAN16fx features 16 analogue Inputs. 8 amplified inputs with 16 Bit resolution and 250kHz total sampling rate and 8 unamplified inputs via a D-Sub 37-pin connector. 32 Digital Inputs/Outputs (three 32-bit counters) all connected to a LAN network using a TCP/IP protocol to provide a safe and complete data..

All-In-One Measurement System – AMS42-USB

The AMS42-USB features 16 analogue Inputs. 8 amplified inputs with 16 Bit resolution and 250kHz total sampling rate and 8 unamplified inputs via a D-Sub 37-pin connector. 8 Digital Inputs/Outputs (one 32-bit counters) all connected to a PC via a USB connection. The modular design of the AMS42-USB allows each..

All-In-One Measurement System – AMS84-LAN16fx

The AMS84-LAN16fx features 16 analogue Inputs. 16 amplified inputs with 16 Bit resolution and 250kHz total sampling rate. 32 Digital Inputs/Outputs (three 32-bit counters) all connected to a LAN network using a TCP/IP protocol to provide a safe and complete data transmission over long distances. The modular design of the..

All-In-One Measurement System – AMS84-USB

The AMS84-USB features 16 analogue Inputs with 16 Bit resolution and 250kHz total sampling rate. 8 Digital Inputs/Outputs (one 32-bit counters) all connected to a PC via a USB connection. The modular design of the AMS84-USB allows each amplified input to be on individual AMS-K cassettes with individual 5B Amplifiers..

AMS System Cassettes – AMS-K

The AMS-K are a range of plug-in cassettes with different connectors on the front panel depending on the sensor, or signal, to be connected. The suitable cassette can be connected to a 5B module to provide a range of different options for connection and inputs. The AMS-K will will connect..

BD 11E / BD12E

The BD 11E / BD 12E line of instruments is based on a proven robust and reliable design that is recognised world-wide as being the standard in recording. All models have differential inputs with constant impedance over all input ranges which allow for accurate measurements from almost any source. The..

BD300 Chart Recorders

The BD 300 is a general purpose measurement recorder in 4, 6 and 8 pen versions for measuring voltage AC/DC, current AC/DC, temperature and frequency. Applications include scientific, laboratory, transport and industrial environments...

BMCM Connection Boards and Backplanes

16 way connection boards suitable for use with the LAN and USB AD16F, USB-AD12F, and USB-AD acquisition units and backplanes for housing amplifiers..

BMCM Network DAQ System for LAN Networks (TCP/IP) – LAN-AD16fx

The LAN-AD16fx features 16 Analogue Inputs (selectable ranges of 1V, 2V, 5V, 10V, with a 250kHz total sampling rate and 16 Bit resolution), 2 Analogue Outputs (10V, with 16 bit resolution), 32 digital I/O channels (3 of which can be configured as 32-bit counters) all connected to a LAN network..

BMCM NEXTView Measurement Software for Data Acquisition & Analysis

The Nextview software allows you to visualize, control, automate, configure, scan, analyze and document with one software. You can implement your measurement applications completely without any programming efforts. The full version features all functions of the software. The NextView 4 software is suitable for 32-Bit systems and the NextView5 software..

BMCM USB DAQ System – USB-AD

The USB-AD features 16 Analogue Inputs (5V, 10Hz Sampling rate, with 12 Bit resolution), 1 Analogue Output (5V, with 12 bit resolution), 4 Digital inputs and 4 digital outputs all connected to a PC via a USB connection. Up to 127 devices can be integrated together...

BMCM USB DAQ System – USB-AD14F USB Powered DAQ Unit

The USB-AD14F features 16 Analogue Inputs (±10V, 20kHz Sampling rate, with 14 Bit resolution), 1 Analogue Outputs (±5V, with 12 bit resolution), 8 digital inputs and 8 digital outputs (first can be configured as a 16-bit counter) all connected to a PC via a USB connection. Up to 127 devices..

BMCM USB DAQ System – USB-PIO

The USB-PIO features 24 Digital TTL Channels via a 25-pin D-Sub female connector to a PC via a USB connection. The data acquisition system is accommodated in the D-Sub connector housing. Suitable for Windows 8.1 and 10 in 64-Bit...

DT80 Data Logger Hire

The Datataker DT80 series stand alone data logger, can be mains or battery powered, with 5-15 analogue inputs ( universal input type ), 12 digital I/O, CAN bus serial input, USB memory up to 512 MB ( 50 million readings ), Logging rates 25 Hz to 99 days. Unit has..

DT82E Data Logger Hire

The dataTaker DT82E is a smart data logger designed especially for environmental monitoring. The DT82E is a robust, low power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display...

DT82i Data Logger Hire

The Datataker DT82I smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT82I is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The..

DT85 Data Logger Hire

Datataker DT85 series stand alone data logger, mains or battery powered, with 16-48 analogue inputs ( universal input type ), 12 digital I/O, MODbus and SDI-12 serial input, USB memory up to 512 MB ( 50 million readings ), Logging rates 25 Hz to 99 days. Unit has an internal..

FS-1400-HIRE

Hire of a Spectrex Sharpeye FS-1400 Multi IR4 (H2) Flame Simulator. Operating Temperature Range 0 to 50°C. Power Supply: 14.8V (4 x 3.7V Rechargeable Lithium-ion Batteries. The unit is ATEX and IECEx approved. Ex II 2 G, Ex db ib op is IIB + H2 T5 Gb. Heavy duty Aluminium,..

GL220 Data Logger Hire

The GL220 is the next generation midi logger following on from the success of the GL200 & GL200A models. With 10 fully isolated multi-function inputs, large internal 2GB Flash memory and a port for an external USB stick memory, this logger has significantly more memory than it predecessors. The USB..

Input Scaling Modules for XR440/XR450 Data Logger

Input scaling modules for use with the XR440 and XR450 data loggers from Pace Scientific. The modules are factory calibrated to allow the XR440, or XR450, pocket logger to accept a wide range of different voltage and mA current input signals. Each individual input channel can be configured for the..

Pace AC Current & AC Voltage Sensors

Self powered AC current and AC voltage sensors. Easy to install and work with a large range of data loggers and monitoring systems including the Pace XR5 and XR440 range. The SC Series of split core current sensors are available with a 0-5vDC output and cover current ranges up to..

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Orphans

FS-1100-Hire

190P Portable Clamp-On Ultrasonic Flow Meter Hire

TGE-HIRE

All-In-One Measurement System – AMS42-LAN16fx

All-In-One Measurement System – AMS42-USB

All-In-One Measurement System – AMS84-LAN16fx

All-In-One Measurement System – AMS84-USB

AMS System Cassettes – AMS-K

BD 11E / BD12E

BD300 Chart Recorders

BMCM Connection Boards and Backplanes

BMCM Network DAQ System for LAN Networks (TCP/IP) – LAN-AD16fx

BMCM NEXTView Measurement Software for Data Acquisition & Analysis

BMCM USB DAQ System – USB-AD

BMCM USB DAQ System – USB-AD14F USB Powered DAQ Unit

BMCM USB DAQ System – USB-PIO

DT80 Data Logger Hire

DT82E Data Logger Hire

DT82i Data Logger Hire

DT85 Data Logger Hire

FS-1400-HIRE

GL220 Data Logger Hire

Input Scaling Modules for XR440/XR450 Data Logger

Pace AC Current & AC Voltage Sensors

FS-1100-Hire

190P Portable Clamp-On Ultrasonic Flow Meter Hire

TGE-HIRE

All-In-One Measurement System – AMS42-LAN16fx

All-In-One Measurement System – AMS42-USB

All-In-One Measurement System – AMS84-LAN16fx

All-In-One Measurement System – AMS84-USB

AMS System Cassettes – AMS-K

BD 11E / BD12E

BD300 Chart Recorders

BMCM Connection Boards and Backplanes

BMCM Network DAQ System for LAN Networks (TCP/IP) – LAN-AD16fx

BMCM NEXTView Measurement Software for Data Acquisition & Analysis

BMCM USB DAQ System – USB-AD

BMCM USB DAQ System – USB-AD14F USB Powered DAQ Unit

BMCM USB DAQ System – USB-PIO

DT80 Data Logger Hire

DT82E Data Logger Hire

DT82i Data Logger Hire

DT85 Data Logger Hire

FS-1400-HIRE

GL220 Data Logger Hire

Input Scaling Modules for XR440/XR450 Data Logger

Pace AC Current & AC Voltage Sensors

FS-1100-Hire

190P Portable Clamp-On Ultrasonic Flow Meter Hire

TGE-HIRE

All-In-One Measurement System – AMS42-LAN16fx

All-In-One Measurement System – AMS42-USB

All-In-One Measurement System – AMS84-LAN16fx

All-In-One Measurement System – AMS84-USB

AMS System Cassettes – AMS-K

BD 11E / BD12E

BD300 Chart Recorders

BMCM Connection Boards and Backplanes

BMCM Network DAQ System for LAN Networks (TCP/IP) – LAN-AD16fx

BMCM NEXTView Measurement Software for Data Acquisition & Analysis

BMCM USB DAQ System – USB-AD

BMCM USB DAQ System – USB-AD14F USB Powered DAQ Unit

BMCM USB DAQ System – USB-PIO

DT80 Data Logger Hire

DT82E Data Logger Hire

DT82i Data Logger Hire

DT85 Data Logger Hire

FS-1400-HIRE

GL220 Data Logger Hire

Input Scaling Modules for XR440/XR450 Data Logger

Pace AC Current & AC Voltage Sensors

CONTACT US

8:30am to 5pm Monday to Thursday8:30am to 3pm on Friday.

We are here to help

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.