TSPC-21S-232
Standard ToughSonic 50 Ultrasonic Level Sensor. Optimal range 305mm to 10m, max range 15.2m. Power Supply 10-30vDC with programmable outputs between 0-10vDC and 4-20mA, plus NPN & PNP switch outputs (configurable as sinking or sourcing) and RS232 serial interface. Marine grade 316 Stainless Steel IP68 smooth housing for easy clamping..
TST200
TST200 1-Wire PT100 Temperature Sensor. Temperature Range -200 to +850°C with accuracy ±0.2°C. 1-Wire interface via dual RJ11 ports, suitable for easy daisy-chaining. IP20 housing with 85 x 35.1 x 23.5mm dimensions. Power Supply 3.5 to 5.5vDC (5V @ 6mA)...
TV-4104
TV-4104 Tinytag View 2 External PT100 Temperature Logger with 4 digit LCD display. Temperature range -50 to +600°C (depending on PT100 probe). Memory 30,000 readings with delayed and magnetic switch trigger start options, plus 2 programmable alarms. Logging intervals 1 sec to 10 days with min, max & actual readings...
Type 595
Type 595 temperature probe with stainless steel stem 6mm diameter, inegral 100mm extension, with connection head...
UTGC3
Positector UTG-C3 with Advanced Body. 2.8" Impact Resistant Colour Touchscreen with Keypad for Quick Menu Navigation and Batch Renaming, Auto Rotating Display with Flip Lock. Audible and Visual Hi-Lo Alarm, Min Scan Mode, Statistics Mode and Storage Capacity 250,000 Readings in up to 1,000 batches and sub-batches. Bluetooth 4.0 and..
WindMaster 3D Ultrasonic Anemometer
The WindMaster 3D ultrasonic anemometer will monitor wind speeds up to 65m/s (145mph), providing digital outputs for U, V, and W vectors, sonic temperature and speed of sound values. Analogue Outputs are also available with relevant options. The WindMasters are constructed from Aluminium and Carbon Fibre, or Stainless Steel, with..
WindObserver90
WindObserver 90 Ultrasonic Anemometer with an IP66 Stainless Steel housing. Wind speed range 0-100m/s, wind direction 0-359 degrees . Optional heating and analogue outputs, plus various connection and base mounting options. Ideal for extreme weather conditions...
WP1012
WP1012 Series – Standard Industrial Weighing Platform in Mild Steel. Platform dimensions 1000 x 1250mm. Capacity 0-150Kg up to 0-3,000Kg. Dunbar top plate with a hammer spray paint finish. Fitted with four Shear Beam load cells sealed to IP66..
WSR-16C
GEN II Wireless Sensor Receiver (WSR) unit with 16 input channels and 16 x 4-20mA Outputs. Supplied with detachable antenna, built in rechargeable batteries (6 x NiMh AA batteries), MP12U AC power supply, LC-TX3 set-up leads, User Instructions and RxConfig software...
1-Wire Wall-Mounted Carbon Dioxide Sensor
The TSM400-1-CP is a 1-Wire Wall-Mounted Carbon Dioxide and Atmospheric Pressure Sensor with a 1-Wire interface, designed for accurate monitoring in environments like retail spaces and office, and suitable for smart applications and data logging. It offers 400 to 5,000ppm with a 1ppm resolution & 10 to 1,200hPa with a..
18108652
Single-Unit Truck-mount Charger with 12vDC cigarette lighter plug for Ventis MX4 gas detector...
3114-N
PR3114-N Slim Series Isolated Universal Converter suitable for use in ATEX Zone 2 Environments. Isolation and conversion of 0-20mA, 0-10vDC, Thermocouple, PT100, RTD, Potentiometer input signals to 0-10V or 0-20mA output signals. Response time: less than 400ms (1s for Temp Inputs), Accuracy 0.1% of span. Power Supply: 24vDC +/-30%, via..
66701
Replacement Long Duration NiMH Battery Pack for the PS500 Portable Gas Detector..
9203A1B2
Solenoid and alarm driver, 2 channel driver output, 2 NPN inputs, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
AC-CT-S-50A
Current Transducer, T10/50A, 30cm / 11.81 inches..
BM25KITCHD50
BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 50m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
CCGBP Series – Brake Pedal Load Cell
The CCGBP load cell is a very low profile load cell designed for the measurement of brake pedal compressive forces. At just 12.5mm high, the CCGBP load cell is small enough to fit in the tightest spaces. The integral mounting and loading plate allows for fast and simple fitting directly..
ComNav G2 GNSS Satellite Compass with G2 Navigator Display
The ComNav G2 GNSS Satellite Compass with Navigator G2 Display provides true heading, GPS position data, gyro data and speed log in a single display. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an autopilot..
DMK331P Flush Diaphragm Pressure Transmitter
The DMK331P pressure transducer has a totally flush pressure port making it ideal to use in viscous and pasty media. It has a pressure range from 0-60 Bar up to 0-400 Bar gauge or absolute. Plus, it comes with 4-20mA and 0-10vDC output options and various mechanical and electrical connections..
DPT-FLOW-7000-AZ-D
DPT-Flow-7000-AZ-D - Air Flow and Velocity Transmitter. Designed for Building Management Automation Systems with measurements for Volume Flow, Velocity and Static and Differential Pressures. Power Supply: 24V ±10% @ <1W. Measuring Range: 700 - 7000 Pascals. Accuracy: >125 Pa, ±1%, ±1 Pa and <125 Pa, ±1%, ±2 Pa. Selectable Output:..
KITFS3
Positector Inspection Kit Suitable for Monitoring Coating Thicknesses of Ferrous Metals, Surface Profiles and Environmental Conditions. KITFS3 Inspection Kit contains: Advanced PosiTector Gage Body, PosiTector 6000 FS Cabled Coating Thickness Probe (Range 0-1,500µm), PosiTector DPM Environmental Probe, PosiTector SPG Surface Profile Probe, Precision Plastic Shims, Glass Zero Plate and Metal..
LEX1-300BAR-0.05%-1/4BSP
LEX 1 Digital Manometer with digital display for pressure and Min/Max values. Range 0 to 300 Bar (Absolute pressure reference) with 0.01 Bar resolution and ±0.05%FS accuracy. Pressure connection: Stainless Steel ¼" BSP male connection with Viton O ring. Rear mating socket for 8-28vDC Power Supply and RS485 Modbus Output...
MCDC8M
Blanking cap for miniature series MCIL type subsea connector, 8 pin male, to suit MCIL8F inline connector or MCBH8F bulkhead connectors. This item isn't available to purchase online but is normally held in stock. You can contact us directly to check availability and pricing. info@omni.uk.com..
