AVT-MOD-D
AVT-MOD-D, Air Velocity Transmitter with display, flow velocity range 0-20M/S and air temperature 0-50°C with RS485 Modbus RTU communications. Power supply 24vDC/AC, ABS housing and stainless steel probe...
BGN Variable Area flow meters for gases and liquids
The BGN range of metal tube variable area flow meters are suitable for measuring a wide range of liquids and gases including hazardous chemicals. With stainless steel body, and visual indicator. Accuracy ±1.6 %. With ANSI 150 flanges, sizes 1/2 to 4 . Available with 4-20mA output and relay outputs,..
BM25KITCHD25
BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 25m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
CCG Annular Force Washer – Compression Load Cell
The CCG load cell is an annular/force washer load cell designed for the measurement of compressive forces and they are suitable for use in a wide range of research and industrial applications. The CCG load cell is often used in electro-mechanical test rigs and other critical bolted installations for monitoring..
CMP21 Pyranometer
The CMP21 Pyranometer is a secondary standard pyranometer that is similar to the CMP11 but has individually optimised temperature compensation. The CMP21 uses a 32-junction thermopile detector and provides an expected output of 0-20mV based on a sensitivity of 7 to 14µV/Wm². The CMP21 has two, 2mm thick, high quality..
ComNav G2 and G2B GNSS Satellite Compass
The ComNav G2 and G2B GNSS Satellite Compass provides true heading measurement with an accuracy of 0.25° RMS. The system uses differential GPS to measure heading and therefore is not subject to magnetic variation or deviation. Heading data is transmitted to an indicator or autopilot via a standard NMEA0183 or..
CryoTemp Low Temperature Data Logger
The CryoTemp data logger is a standalone device suitable for logging temperatures between -86 and +35°C. The units has internal memory for 32,767 readings with a reading rate of every 5 seconds up to every 30 minutes and battery life of up to 1 year @ -80°C. Interface is via..
DCX-22 SG/VG Water Level Data Logger
The DCX-22 is an autonomous, battery powered water level data logger made of stainless steel and is designed to record water depth (pressure) and temperature over long periods. The logger can store 57,000 readings. It is available with ranges of 0-10 to 0-100 metres WG, and has an optional GSM..
DL300 Wind Turbine Controller (12/24V)
The DL-300 charge controller is designed to be used with the LE-v150, LE-300 and LE-300 wind turbines. It incorporates a 300 Watt resistor/heater and controller board in a stout powder coated steel enclosure. The DL-300 controller operates like an electrical overflow for your batteries and additional power is dissipated as..
DMP331 Flush Diaphragm Pressure Transmitter
Flush Diaphragm Pressure Transmitter, Series DMP331, ranges from vacuum up to 600 Bar, with 1" or 1½" or 2" triclamp hygenic stainless steel fitting, accuracy 0.25 - 0.5%, operating temperature -25 to +125°C. Output 4-20mA, 0-10V, 0-5V..
DPT-FLOW-7000-D
DPT-Flow-7000-D - Air Flow and Velocity Transmitter with Display. Designed for Building Management Automation Systems with measurements for Volume Flow, Velocity and Static and Differential Pressures. Power Supply: 24V ±10% @ <1W. Measuring Range: 700 - 7000 Pascals. Accuracy: >125 Pa, ±1.5%, ±1 Pa and <125 Pa, ±1.5%, ±2 Pa...
EL-USB-VAC
EL-USB-VAC Data Logger for Vaccines with a thermistor temperature probe immersed in a Glycol solution. The data loggers include a built-in LCD display and USB port for downloading the data. Each logger is supplied with a 3m thermistor probe and Glycol filled bottle. Temperature range -40 to +100°C. The button..
Fluidwell F130 Batch Controller
The Fluidwell F130 Batch Controller is Ideal for batching small and large quantities with a wide range of options to allow batch control with various types of flow meters and control systems. The F130 includes a large display showing preset values and running batch values and will accept pulse, sine..
FS5108CV-9
Gas flow switch with PVC wires, 1/2 inch NPT female connection, stainless steel body with viton seals. SPDT switch 0.3 amps at 120 VAC, operating temperature -40 to 150 deg C. Adjustable flow range set point at 1 to 700 litres per minute..
G2A15I09LMA
Range 38-380,Size 1 1/2 inch BSPT (20.7 Bar). Aluminium body...
Grain Moisture Meters
These grain moisture meters are ideal for portable solution for on-site moisture measurements in allotments, grain storage, machining of packed grains and a wide range of beans, lentils, rice and other loose grains and corns. MC-7825G includes an insertion probe sensor and the MC-7828G includes a sampling cup measurement system,..
KITF3
Positector Inspection Kit Suitable for Monitoring Coating Thicknesses of Ferrous Metals, Surface Profiles and Environmental Conditions. KITF3 Inspection Kit contains: Advanced PosiTector Gage Body, PosiTector 6000 F Integrated Coating Thickness Probe (Range 0-1,500µm), PosiTector DPM Environmental Probe, PosiTector SPG Surface Profile Probe, Precision Plastic Shims, Glass Zero Plate and Metal..
LEO5-100BAR-¼BSP
LEO 5 High Resolution Manometer with Peak and Recording Function for up to 56,000 readings. Range 0 to 101 BarA with accuracy of 0.05%FS. Standard mode is at 2Hz, peak reading mode at 5kHz. Pressure connection 1/4 inch BSP male connection, compensated temperature 0 to 50 C, internal battery for..
Leveline-CTD Packages
The LeveLine-CTD package include a 10m water level sensor, 10m cable (or deployment code) to the surface, RC-300 RapidCal Solution and LL-PC-Kit. Units are ideal starter kit for monitoring rivers, docks or coastal water levels, temperature and conductivity levels in a single package. Simply records water depths up to 10m,..
LFT/3/4HIGH/BSP
3/4 inch Liquid Flow Turbine 14 - 140 L/min St/Steel Construction, BSP Screwed Connections..
LL-ABS-CTD-PACKAGE
The LL-ABS-CTD-Package contains: a 0-10m LeveLine Absolute CTD, LeveLine-Baro, 10m Deployment cord, RC-300 (Conductivity calibration solution 2570µS) and a LL-PC-KIT download cable...
LL-GAUGE-CTD-PACKAGE
The LeveLine-CTD-GAUGE Packages include a 0-10m LL-CTD-Gauge Sensor, LL-EX-10m-V (vented cable), EX-DH (desiccant housing that fits to the cable connector), DC-100 (100ml desiccant cartridge, fits to EX-DH), RC-300 (conductivity calibration solution 2570µS) and a LL-PC-KIT download cable...
LPMS-CANAL3
LPMS-CANAL3: 9-Axis IMU/AHRS/Motion Sensor with CANBus and USB connectivity. LPMS-CANAL3 includes 3-Axis Accelerometer, 3-Axis Gyroscope, 3-Axis Magnetometer Sensors. Data output format: Raw Data; Euler Angle; Quaternion @ up to 500Hz. Power supply 5 to 18vDC (CANBus), 5vDC (USB). Dimensions: 50 x 42 x 25mm, weight: 106.8 (±4) g. The LPMS-CANAL3..
LPMS-IG1W 9-Axis Wi-Fi IMU
The LPMS-IG1W Motion Sensor is a high precision, miniature, inertial measurement unit (IMU) with WiFi Connectivity. The LPMS-IG1W features a 3-axis accelerometer, Dual gyroscopes and magnetometer sensors and can provide raw data, euler angle or quaternion data output formats via Wireless WiFi comms to PC or Smartphones. The sensors are..
