QI-300-V-485
QI-300-V-485 single phase RMS current transformer, input range ±300 Amps, power supply 12-30vDC. Accuracy 0.5%FS. Bandwidth 20-1000Hz. RS485 Modbus output, and 0-10vDC output...
QI-POWER-485-LV
QI-Power Energy/Power Meter suitable for low voltage single phase AC RMS/DC Current & Voltage. Current Range: up to 50A AC/DC. Voltage Range: up to 80vAC or 100vDC. RS485 Modbus RTU output. DIP Switch and PC programming. Power Supply 9-30vDC. DIN Rail mounting, dimensions: 46.1 x 63 x 26.4mm...
RH-W-AH
RH-W-AH Wall-mounted Air Temperature and Relative Humidity transmitter with Jumper Selectable 0-10vDC or 4-20mA Outputs. Measurement Range 0-100% RH, -20 to +50°C with an accuracy of ±2%RH (20 to 80%RH), ±0.5°C. Power Supply: 24vDC ±10%. Unit is housed in a PC/GF (Halogen free, Flame Retardant & UV Stabilized enclosure with..
RHT Climate Relative Humidity and Temperature Transmitters
The RHT Climate transmitter has an integrated temperature and relative humidity sensor on the wall mounted housing, or at the end of a duct mounted probe. The Stainless Steel probe is available in 150, 250 and 400mm length probes. All RHT Climate transmitters are available with 2 analogue outputs configurable..
RI-TVV0030
RI-TV Series Isolated True RMS Voltage Transducer. DIN Rail Mounted with Screw Terminals. Selectable Input Range: 0-24, 0-54, 0-120, 0-250, 0-450vAC & 0-24, 0-54, 0-120, 0-250, 0-450vDC. Selectable Output Range: 0-20mA, 4-20mA, ±20mA, 20-0mA, 20-4mA, 0-5V, 0-10V, ±5V, 10V, 10-0V. Supply Voltage: 10-36vDC @ 1.5W. Operating Temp -20 to +60°C,..
RME1-PT-100-00-80-IA3-HT
PT100 Acquisition Module, 8 RTD inputs, Ethernet communication through MODBUS TCP/IP, SNMP, XML/CVS and HTTP protocols. Power supply 10 - 30vDC, DIN rail mounting...
RME2-PT-100-00-80-IA3
RME2-PT Analogue Acquisition Module. The unit provides 8 Differential Input Channel suitable for 2- or 3- wire PT100 Temperature Sensors. Variables can be read in 5 different ways simultaneously (Modbus TCP, Web Page HTTP, SNP, CSV and XML). DIN Rail mounted industrial enclosure with an RJ45 Ethernet Port, RS232 and..
RMS1-XT-110016-0X-GR-MB
Remote Outputs Module, 16 Open Collector Outputs. RS232/RS485 Modbus ASCII/RTU Communication, Wide power supply range: 10 up to 30vDC, DIN rail mounting...
RTD-SURFACE-CURVED-1MFL
Self-Adhesive Surface Mounted PT100 Class A Sensor with 1m PFA Insulated Cable. Measurement Range -30 to +150°C. Suitable for a curved surface mounting with a 16 x 50mm rubber patch..
SC-250 Variable Area Flow Meter
The SC-250 Variable Area Flow Meter, is suitable for a wide range of liquid, gaseous media, including oil, pulp, chemicals, food products, hot and cold water, and saturated steam circuits. Meters are available in sizes DN15 to DN150, with flow ranges from 2.5 L/H to 180 M3/H, and air from..
SD-15B-05
SD-15B-5 DC to DC converter. Input Voltage: 18-36vDC. Output Voltage 5vDC @ 15 Watts. Dimensions: 78 x 51 x 28mm. Panel mounted enclosure with short circuit, overload and over-voltage protection...
Sealed Lead Acid Batteries
Sealed Lead Acid (SLA) Batteries are a robust, low cost, reliable power source suitable for a wide range of applications. SLA batteries are ideal for small remote power application with solar panels. The batteries are tolerant to overcharging and can be left on trickle or float charge for prolonged periods...
Senix Toughsonic CHEM Ultrasonic Level Sensors
The ToughSonic CHEM LVL sensors are designed for liquid level measurements in corrosive chemical environments. The LVL sensors use a non-contact, ultrasonic signal to measure distances up to 35 ft (10.7m). Units are fully submersible, chemically and shock resistant with a PVDF housing and fully sealed and potted electronics. The..
Senturion XPD12 Disc Mounted Proximity Probe
The Senturion XPD12 proximity probe system with a disc mount proximity sensor with a 25.0mm diameter. The probe uses eddy current principle to measure distance up to 12.7mm with resolution of less than 0.003mm. It is designed for monitoring targets from as little as 15mm in installation, even in a..
Series 23SYEi
Series 23SYEi ATEX Temperature Compensated Pressure Transmitter. Standard compensated range of 0 to 50°C, -10 to +80°C available on request. Covers ranges of 1 to 1000 Bar with a fully welded sensor...
Series 26Y Piezoresistive Water Level Transmitter.
The Series 26Y are pressure transmitters used in water level measurements that require considerable accuracy but at a competitive price. Ranges from 200 mBar up to 10 bar (corresponding to water column depths of 2 m to 100 m), sealed at 1 Bar or vented. Available with standard voltage and..
SGR Series Rotary Transducer For Torque Measurements – External Electronics
The SGR Series Transducers with external electronics operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the bridge output signal and measure the torque applied to the shaft. Using the full bridge helps to diminish errors from any off-axis forces and increases the sensitivity..
SGR520
SGR520 TorqSense Torque sensor with a variable analogue and serial outputs for torque measurements with integral electronics. Torque ranges from 0-1Nm to 0-13,000 Nm..
SGR521
SGR521 TorqSense Torque sensor with variable analogue outputs for Torque, Speed and Power measurements with integral electronics. Torque ranges from 0-175mNm to 0-13,000 Nm and 60 Pulse/Revolution...
SGR540
SGR540 TorqSense Torque sensor with a variable analogue and serial outputs for torque measurements with external electronics. Torque ranges from 0-1Nm to 0-13,000 Nm..
SGR541
SGR541 TorqSense Torque sensor with a variable analogue outputs for torque and RPM or power measurements with external electronics. Torque ranges from 0-1Nm to 0-13,000 Nm...
SGW1-13B0-00-IA3-MMP-CF
Modbus Multiplexer and Converter. 1 RS232 port with RTS for control and 3 x RS232/RS485 configurable ports, with 1 x USB port for configuration. DIN Rail mounted industrial enclosure with terminal blocks. Power supply: 10-30vDC, consumption 70mA @ 12vDC. Dimensions: 100 x 22.5 x 112mm. Operating Temperature: -15 to 65°C...
SharpEye 40/40C-I Flame Detector
SharpEye 40/40C-I Multispectrum Quad-Sense IR3 Flame Detector. 5 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Response time: Typically< 5 Seconds. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA signal with HART Comms, plus RS485 Modbus Comms. Power Supply: 18-32vDC. All..
