MSR 385WD Wireless Data Logger, with integrated 868MHz receiver module, receives and stores the measured data of up to ten transmitter modules (MSR385SM). 1 million reading flash memory. High-contrast OLED (organic light-emitting diode) colour display. Lithium-polymer 2,400mAh battery, rechargeable via USB connection. Unit comes complete with PC software for recording..
MSR63 Temperature Data Logger. Temperature Range: -30 to +70°C. Logging Interval: 1 minute up to 10 days. Internal Memory: 16,000 values. Replaceable CR 2023 Battery. Status LEDs to give a quick indication of any alarm conditions. Dimensions 36 x 12 x 71mm, weight 17g. Minimum Order Quantity: 10 Units...
MTN/1185 Series general purpose RMS velocity transducer with an integral top-entry connector. Robust Stainless Steel construction with a 2-wire 4-20mA output. Measurement ranges: 0-10, 0-20, 0-25, 0-50, 0-100mm/sec. Power supply 12-32vDC. Frequency response 2Hz to 1kHz. Operating temperature -25 to +90°C. Various mounting options. Sealed to IP67...
MTN/1185 RMS Vibration Velocity Sensor with 4-20mA Output
The MTN/1185 is a general purpose, top-entry velocity transducer with a 4-20mA output of the RMS velocity values. Sensors are constructed of stainless steel throughout for a robust sensor suitable for continuous vibration monitoring, even in harsh environments. Electrical connection options include a 3-pin 62GB connector, 2-pin MS connector, integral..
MTN/1187 Series general purpose RMS acceleration transducer with an integral connector. Robust Stainless Steel construction with a 2-wire 4-20mA output. Measurement ranges: 0-1, 0-2, 0-5, 0-10, 0-20g. Power supply 12-32vDC. Frequency response 2 Hz to 1kHz. Electrical connection, 2 or 3 pin connector. Operating temperature -25 to +90°C. Various mounting..
MTN/VM220 High Performance Vibration Meter Kit. Meter will provide readings for vibrations, acceleration and displacement. The kit consists of a compact vibration meter, dual-output general purpose sensor, magnetic base and spike, a coiled cable with 4-pin Lumberg connector at each end, foam-lined protective carry case, universal battery chargers and calibration..
The BETA MJ-SDC is a multi-jet mechanical water meter with dry type dial counter suitable for a variety of metering applications including general purpose, sub-tenant and commercial metering tasks available in sizes DN15 (1/2”) to DN50 (2”). Ideal for cold water applications up to 30°C and 16 Bar line pressure...
The Multical 403 is designed to monitor the energy transfers in all types of thermal installation where water is used as the energy-conveying medium. The meter utilises an ultrasonic flow meter and two temperature sensors to measure the flow rate and temperature of the outgoing and returning water to calculate..
MX16 Gas Detection Controller configured for Analogue or Digital Input Gas Detectors. 2 Alarm levels (Al1, Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm. The MX16 is delivered alone..
MX6 iBrid multi gas portable gas detector and PID for flammable and toxic gases. Up to 6 gases can be monitored, with audio and visual alarms, and data logging. Full colour display Hazardous Area Approved..
N1040i Universal Process Indicator. Suitable for PT100, Thermocouples, 0/4-20mA, 0-50mV and 0-5/10V inputs. Programmable via front keypad and bright LED display. Power Supply: 100-240vAC, 24 to 240vDC...
N1500 Universal Process Indicator. Suitable for PT100, Thermocouples, 0/4-20mA, 0-50mV and 0-5/10V inputs. Programmable via front keypad and bright LED display. Output options of 4-20mA retransmission, RS485 Modbus and 2 SPDT & 2 SPST Alarm Relays. Power supply 85 - 264vAC/DC and option of 24vDC...
The N20K48 is a compact controller that can be expanded by a wide range of micromodules to fit any application. The N20K48 micromodules use ClickNGo technology to allow the module to fit the display and be easily configured using the QuickTune Mobile app..
Digital thermostat for heating and refrigeration purposes with timer support. It has PT1000, thermistor NTC, PTC or J Type Thermocouples inputs. Sensor input: PT100 (-50 to 300 C), PT1000 (-200 to 530 C), J Type Thermocouple (0 to 600 C) (J, K or T Types available) or thermistor (-50 to..
N480D Series PID Temperature Controller suitable for Thermocouples and PT100 RTD. Output options of SPST, SPDT Relays, 4-20mA and logic pulse. Dimensions 48 x 48 x 110mm, operating temperature 0 to 55 C. Optional 24vDC Power Supply...
ND-350 Multifunction power meter for three phase supplies with ModBus RS485 output. Accuracy: Class 0.1 IEC60688. Current input available up to 1,000A via external CT's with 5A output. Dimensions: 106 x 90 x 58mm (DIN rail mounting). LCD display can show all values using button panel...
Nemo D4-DC Multi-Function Power Meter. Suitable for DC power monitoring, 10-300vDC and up to 10A with direct connections, higher available with suitable adapters and DC current shunts. LCD display, RS485 Modbus Communications, pulse output and 2 relay outputs. Auxiliary Supply 20-150vDC...
NS 500/063 Pelton Wheel Flowmeter. 316/431 Wetted parts (PTFE or Viton oring). End connections 3/4 inch BSP. Pressure rating 345 bar. Calibrated over the range of 0.18-1.8 l/min. For use on Water. Standard pick-up coil & connector. Fitted with welded boss for potting...
NT turbine flowmeter, all stainless steel body and wetted parts. Accuracy 0.5% FSD. Standard operating temperature -30 to +150 deg C. With AC sine wave frequency output...
NT turbine flowmeter, all stainless steel body and wetted parts. Sizes 1/2 to 6 inch with ANSI flanges or BSP threads. Flow ranges 0.5-5 ltrs/min to 1000 to 10,000 ltrs/min. Accuracy 0.5% FSD. Standard operating temperature -30 to +150 deg C. With AC sine wave frequency output..
NT Stainless Steel Turbine Flow Meters for clean liquids
Stainless steel turbine flow meters for liquids, Pipe sizes 1/4 to 6 with BSP threaded end connections or ANSI flanges, operating pressures up to 5,000 PSI, 350 bar. Flow ranges from 0.5 - 5 ltrs/min to 1000 - 10000 ltrs/min. Options: Eexia, digital indicators, subsea operation, high operating temperature up..
OBBS Bending Beam - Compression Load Cell. Ranges 5Kg to 500Kg, Output 2mV/V, accuracy 0.03%. OBBS load cell is a stainless steel construction with an IP67 rating...
MSR 385WD Wireless Data Logger, with integrated 868MHz receiver module, receives and stores the measured data of up to ten transmitter modules (MSR385SM). 1 million reading flash memory. High-contrast OLED (organic light-emitting diode) colour display. Lithium-polymer 2,400mAh battery, rechargeable via USB connection. Unit comes complete with PC software for recording and analysing the data (Windows XP/Vista/7/8). Dimensions: Housing without aerial: 120 x 75 x 25mm, aerial length: 85mm. Operating temperature -20 to +60 C. ...
MSR63 Temperature Data Logger. Temperature Range: -30 to +70°C. Logging Interval: 1 minute up to 10 days. Internal Memory: 16,000 values. Replaceable CR 2023 Battery. Status LEDs to give a quick indication of any alarm conditions. Dimensions 36 x 12 x 71mm, weight 17g. Minimum Order Quantity: 10 Units. ...
MTN/1185 Series general purpose RMS velocity transducer with an integral top-entry connector. Robust Stainless Steel construction with a 2-wire 4-20mA output. Measurement ranges: 0-10, 0-20, 0-25, 0-50, 0-100mm/sec. Power supply 12-32vDC. Frequency response 2Hz to 1kHz. Operating temperature -25 to +90°C. Various mounting options. Sealed to IP67. ...
MTN/1185 RMS Vibration Velocity Sensor with 4-20mA Output
The MTN/1185 is a general purpose, top-entry velocity transducer with a 4-20mA output of the RMS velocity values. Sensors are constructed of stainless steel throughout for a robust sensor suitable for continuous vibration monitoring, even in harsh environments. Electrical connection options include a 3-pin 62GB connector, 2-pin MS connector, integral stainless steel overbraided ETFE or heavy duty PU cable. Mounting options include a quick fit, 1/4" UNF or various mounting adapters to standard mounting threads. ...
MTN/1187 Series general purpose RMS acceleration transducer with an integral connector. Robust Stainless Steel construction with a 2-wire 4-20mA output. Measurement ranges: 0-1, 0-2, 0-5, 0-10, 0-20g. Power supply 12-32vDC. Frequency response 2 Hz to 1kHz. Electrical connection, 2 or 3 pin connector. Operating temperature -25 to +90°C. Various mounting options. Sealed to IP67. ...
MTN/VM220 High Performance Vibration Meter Kit. Meter will provide readings for vibrations, acceleration and displacement. The kit consists of a compact vibration meter, dual-output general purpose sensor, magnetic base and spike, a coiled cable with 4-pin Lumberg connector at each end, foam-lined protective carry case, universal battery chargers and calibration certificate. ...
The BETA MJ-SDC is a multi-jet mechanical water meter with dry type dial counter suitable for a variety of metering applications including general purpose, sub-tenant and commercial metering tasks available in sizes DN15 (1/2”) to DN50 (2”). Ideal for cold water applications up to 30°C and 16 Bar line pressure. Meters are WRAS approved for use with drinking water with an epoxy coated Brass body. ...
The Multical 403 is designed to monitor the energy transfers in all types of thermal installation where water is used as the energy-conveying medium. The meter utilises an ultrasonic flow meter and two temperature sensors to measure the flow rate and temperature of the outgoing and returning water to calculate the energy transferred. Suitable for pipe diameters from ½" to 2" with threaded connections and flanged connections of DN25 to DN50. The meter also includes ...
MX16 Gas Detection Controller configured for Analogue or Digital Input Gas Detectors. 2 Alarm levels (Al1, Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm. The MX16 is delivered alone and does not include a detector. Requires COM16 to complete configuration for 4-20mA or Digital Inputs. ...
MX6 iBrid multi gas portable gas detector and PID for flammable and toxic gases. Up to 6 gases can be monitored, with audio and visual alarms, and data logging. Full colour display Hazardous Area Approved ...
N1040i Universal Process Indicator. Suitable for PT100, Thermocouples, 0/4-20mA, 0-50mV and 0-5/10V inputs. Programmable via front keypad and bright LED display. Power Supply: 100-240vAC, 24 to 240vDC. ...
N1500 Universal Process Indicator. Suitable for PT100, Thermocouples, 0/4-20mA, 0-50mV and 0-5/10V inputs. Programmable via front keypad and bright LED display. Output options of 4-20mA retransmission, RS485 Modbus and 2 SPDT & 2 SPST Alarm Relays. Power supply 85 - 264vAC/DC and option of 24vDC. ...
The N20K48 is a compact controller that can be expanded by a wide range of micromodules to fit any application. The N20K48 micromodules use ClickNGo technology to allow the module to fit the display and be easily configured using the QuickTune Mobile app ...
Digital thermostat for heating and refrigeration purposes with timer support. It has PT1000, thermistor NTC, PTC or J Type Thermocouples inputs. Sensor input: PT100 (-50 to 300 C), PT1000 (-200 to 530 C), J Type Thermocouple (0 to 600 C) (J, K or T Types available) or thermistor (-50 to 120 C). Output: One SPDT relay (1HP(16A resistive)/250vAC) and one timer-controlled outlet with a SPST relay (3A (5A resistive)/250vAC), Resolution: 0,1 C from -19.9 to ...
N480D Series PID Temperature Controller suitable for Thermocouples and PT100 RTD. Output options of SPST, SPDT Relays, 4-20mA and logic pulse. Dimensions 48 x 48 x 110mm, operating temperature 0 to 55 C. Optional 24vDC Power Supply. ...
ND-350 Multifunction power meter for three phase supplies with ModBus RS485 output. Accuracy: Class 0.1 IEC60688. Current input available up to 1,000A via external CT's with 5A output. Dimensions: 106 x 90 x 58mm (DIN rail mounting). LCD display can show all values using button panel. ...
Nemo D4-DC Multi-Function Power Meter. Suitable for DC power monitoring, 10-300vDC and up to 10A with direct connections, higher available with suitable adapters and DC current shunts. LCD display, RS485 Modbus Communications, pulse output and 2 relay outputs. Auxiliary Supply 20-150vDC. ...
NS 500/063 Pelton Wheel Flowmeter. 316/431 Wetted parts (PTFE or Viton oring). End connections 3/4 inch BSP. Pressure rating 345 bar. Calibrated over the range of 0.18-1.8 l/min. For use on Water. Standard pick-up coil & connector. Fitted with welded boss for potting. ...
NT turbine flowmeter, all stainless steel body and wetted parts. Accuracy 0.5% FSD. Standard operating temperature -30 to +150 deg C. With AC sine wave frequency output. ...
NT turbine flowmeter, all stainless steel body and wetted parts. Sizes 1/2 to 6 inch with ANSI flanges or BSP threads. Flow ranges 0.5-5 ltrs/min to 1000 to 10,000 ltrs/min. Accuracy 0.5% FSD. Standard operating temperature -30 to +150 deg C. With AC sine wave frequency output ...
NT Stainless Steel Turbine Flow Meters for clean liquids
Stainless steel turbine flow meters for liquids, Pipe sizes 1/4 to 6 with BSP threaded end connections or ANSI flanges, operating pressures up to 5,000 PSI, 350 bar. Flow ranges from 0.5 - 5 ltrs/min to 1000 - 10000 ltrs/min. Options: Eexia, digital indicators, subsea operation, high operating temperature up to 400 degrees C ...
OBBS Bending Beam - Compression Load Cell. Ranges 5Kg to 500Kg, Output 2mV/V, accuracy 0.03%. OBBS load cell is a stainless steel construction with an IP67 rating. ...
MSR 385WD Wireless Data Logger, with integrated 868MHz receiver module, receives and stores the measured data of up to ten transmitter modules (MSR385SM). 1 million reading flash memory. High-contrast OLED (organic light-emitting diode) colour display. Lithium-polymer 2,400mAh battery, rechargeable via USB connection. Unit comes complete with PC software for recording..
MSR63 Temperature Data Logger. Temperature Range: -30 to +70°C. Logging Interval: 1 minute up to 10 days. Internal Memory: 16,000 values. Replaceable CR 2023 Battery. Status LEDs to give a quick indication of any alarm conditions. Dimensions 36 x 12 x 71mm, weight 17g. Minimum Order Quantity: 10 Units...
MTN/1185 Series general purpose RMS velocity transducer with an integral top-entry connector. Robust Stainless Steel construction with a 2-wire 4-20mA output. Measurement ranges: 0-10, 0-20, 0-25, 0-50, 0-100mm/sec. Power supply 12-32vDC. Frequency response 2Hz to 1kHz. Operating temperature -25 to +90°C. Various mounting options. Sealed to IP67...
MTN/1185 RMS Vibration Velocity Sensor with 4-20mA Output
The MTN/1185 is a general purpose, top-entry velocity transducer with a 4-20mA output of the RMS velocity values. Sensors are constructed of stainless steel throughout for a robust sensor suitable for continuous vibration monitoring, even in harsh environments. Electrical connection options include a 3-pin 62GB connector, 2-pin MS connector, integral..
MTN/1187 Series general purpose RMS acceleration transducer with an integral connector. Robust Stainless Steel construction with a 2-wire 4-20mA output. Measurement ranges: 0-1, 0-2, 0-5, 0-10, 0-20g. Power supply 12-32vDC. Frequency response 2 Hz to 1kHz. Electrical connection, 2 or 3 pin connector. Operating temperature -25 to +90°C. Various mounting..
MTN/VM220 High Performance Vibration Meter Kit. Meter will provide readings for vibrations, acceleration and displacement. The kit consists of a compact vibration meter, dual-output general purpose sensor, magnetic base and spike, a coiled cable with 4-pin Lumberg connector at each end, foam-lined protective carry case, universal battery chargers and calibration..
The BETA MJ-SDC is a multi-jet mechanical water meter with dry type dial counter suitable for a variety of metering applications including general purpose, sub-tenant and commercial metering tasks available in sizes DN15 (1/2”) to DN50 (2”). Ideal for cold water applications up to 30°C and 16 Bar line pressure...
The Multical 403 is designed to monitor the energy transfers in all types of thermal installation where water is used as the energy-conveying medium. The meter utilises an ultrasonic flow meter and two temperature sensors to measure the flow rate and temperature of the outgoing and returning water to calculate..
MX16 Gas Detection Controller configured for Analogue or Digital Input Gas Detectors. 2 Alarm levels (Al1, Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266 x 96mm. The MX16 is delivered alone..
MX6 iBrid multi gas portable gas detector and PID for flammable and toxic gases. Up to 6 gases can be monitored, with audio and visual alarms, and data logging. Full colour display Hazardous Area Approved..
N1040i Universal Process Indicator. Suitable for PT100, Thermocouples, 0/4-20mA, 0-50mV and 0-5/10V inputs. Programmable via front keypad and bright LED display. Power Supply: 100-240vAC, 24 to 240vDC...
N1500 Universal Process Indicator. Suitable for PT100, Thermocouples, 0/4-20mA, 0-50mV and 0-5/10V inputs. Programmable via front keypad and bright LED display. Output options of 4-20mA retransmission, RS485 Modbus and 2 SPDT & 2 SPST Alarm Relays. Power supply 85 - 264vAC/DC and option of 24vDC...
The N20K48 is a compact controller that can be expanded by a wide range of micromodules to fit any application. The N20K48 micromodules use ClickNGo technology to allow the module to fit the display and be easily configured using the QuickTune Mobile app..
Digital thermostat for heating and refrigeration purposes with timer support. It has PT1000, thermistor NTC, PTC or J Type Thermocouples inputs. Sensor input: PT100 (-50 to 300 C), PT1000 (-200 to 530 C), J Type Thermocouple (0 to 600 C) (J, K or T Types available) or thermistor (-50 to..
N480D Series PID Temperature Controller suitable for Thermocouples and PT100 RTD. Output options of SPST, SPDT Relays, 4-20mA and logic pulse. Dimensions 48 x 48 x 110mm, operating temperature 0 to 55 C. Optional 24vDC Power Supply...
ND-350 Multifunction power meter for three phase supplies with ModBus RS485 output. Accuracy: Class 0.1 IEC60688. Current input available up to 1,000A via external CT's with 5A output. Dimensions: 106 x 90 x 58mm (DIN rail mounting). LCD display can show all values using button panel...
Nemo D4-DC Multi-Function Power Meter. Suitable for DC power monitoring, 10-300vDC and up to 10A with direct connections, higher available with suitable adapters and DC current shunts. LCD display, RS485 Modbus Communications, pulse output and 2 relay outputs. Auxiliary Supply 20-150vDC...
NS 500/063 Pelton Wheel Flowmeter. 316/431 Wetted parts (PTFE or Viton oring). End connections 3/4 inch BSP. Pressure rating 345 bar. Calibrated over the range of 0.18-1.8 l/min. For use on Water. Standard pick-up coil & connector. Fitted with welded boss for potting...
NT turbine flowmeter, all stainless steel body and wetted parts. Accuracy 0.5% FSD. Standard operating temperature -30 to +150 deg C. With AC sine wave frequency output...
NT turbine flowmeter, all stainless steel body and wetted parts. Sizes 1/2 to 6 inch with ANSI flanges or BSP threads. Flow ranges 0.5-5 ltrs/min to 1000 to 10,000 ltrs/min. Accuracy 0.5% FSD. Standard operating temperature -30 to +150 deg C. With AC sine wave frequency output..
NT Stainless Steel Turbine Flow Meters for clean liquids
Stainless steel turbine flow meters for liquids, Pipe sizes 1/4 to 6 with BSP threaded end connections or ANSI flanges, operating pressures up to 5,000 PSI, 350 bar. Flow ranges from 0.5 - 5 ltrs/min to 1000 - 10000 ltrs/min. Options: Eexia, digital indicators, subsea operation, high operating temperature up..
OBBS Bending Beam - Compression Load Cell. Ranges 5Kg to 500Kg, Output 2mV/V, accuracy 0.03%. OBBS load cell is a stainless steel construction with an IP67 rating...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
