Products

Grid View
List View

SCS Calibration for Vane and Thermoelectric Anemometers

Omni Instruments can provide SCS certificates for all of the MiniAir and ThermoAir ranges of anemometers. We can provide initial calibrations on brand new devices and also a recalibration service for any MiniAir and ThermoAir units returned to us for recalibration. Calibration can be done with air velocities of 0-50m/s,..

LOADBUTM16X2.0

Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 32mm Diameter, 10mm Button and M16 x 2.0 Male Right-hand Thread, 16mm thread length...

SENSUS-G16P

2 inch Diaphragm Gas Meter with Pulse Output, Pulser: 1 imp/0.1 m³ ~ Reed Switch, Qmax 25m³/h..

SER-9510

A service kit for the Tinytag Talk 2 and Tinytalk data loggers. This pack contains a replacement battery, desiccant pack and a service instruction sheet...

SER-9512

A service kit for the Tinytag Transit (TG-0050). This kit contains a replacement battery and a service instruction sheet...

SER-9540

XP-Tinytag Plus Re-ed Service kit, includes 8 x AA Batteries, seal and silica gel pack..

Serial Line Voltage Level Converters, RS232, RS422, and TTL

The Microbotics serial converters offer full duplex serial line level conversion that supports connections to RS232, RS422, and TTL devices. Use of these converters allows a device with an RS232 port to obtain higher data rates and longer cable lengths. In addition, the small size of the Microbotics RS232-RS422 converters..

Series 23 & 25 Pressure Transmitter

Series 23 piezoresistive pressure transmitters with a standard " BSP pressure port or Series 25 with a " flush diaphragm for more specialised applications. Pressure ranges 200mBar up to 1000 Bar with sealed or vented gauge, absolute or differential pressure references. Outputs are 2- or 3- wire 4/0-20mA or 0-10vDC..

Series 23Y

Series 23Y Temperature Compensated Pressure Transmitter. Standard compensated range of 0 to 50°C, -10 to +80°C available on request. Covers ranges of 0.2 to 2 Bar with a floating mounted sensor with internal O-Ring..

Series 35X Flush Diaphragm Pressure Transmitter

Series 35X Piezoresistive Pressure Transmitter with Flush Diaphragm. RS485 interface with programmable Analogue output and RS485 Modbus RTU Comms...

Series 6 Miniature Pressure Transducer

Series 6, miniature pressure transducer, gauge or absolute. Ranges up to 600 Bar, operating temperatures up to 100 C, low power consumption , 0.5 - 5mA. Output 600 - 1,000mV full scale at 4mA excitation. Pressure connection 1/4 inch BSP male thread. Unit tested for function only, with no calibration..

Series 8 miniature pressure transducer

Series 8, miniature pressure transducer, gauge or absolute. Ranges up to 1000 Bar, operating temperatures up to 150 deg C, low power consumption , 2 - 4 mA. Up to 900mV O/P at 4mA excitation...

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque. A speed sensor for monitoring in dynamic applications, enabling direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the..

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque with an external electronics box. An integrated speed sensor enable the direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to..

BN4-4FMA10K-SS

¼" BSP female to ¼" NPT male adaptor. Converts a ¼" BSP to ¼" NPT thread. Stainless Steel 316 constructions and rated to 10,000 psi. Suitable for use with the LEO digital manometers and other pressure sensor...

ENCL-SV600

Small ABS Enclosure, sealed to IP 65, suitable for housing one SV300 or SV600 AC Voltage Sensors. When purchased with AC Voltage Sensor, the sensor will be mounted and wired with supplied transformer. Enclosure is fitted with glands for access...

SGW1-2044-IA-MB-DF1

Modbus ASCII/RTU to DF1 Converter, 2 RS232 ports. Industrial Applications...

SharpEye Flame Detector.

The SharpEye Flame Detectors are compliant with European standard EN54-10. These units are also SIL2 and EX approved for Zone 1 hazardous areas. The SharpEye detectors are specifically designed for all fire types and can use one of several sensors, either in UV, IR or a combination of both...

SKYWATCH-BL-500

Skywatch Bluetooth anemometer for smartphone, measures wind speed (3-150 km/h, accuracy ±3%), wind direction, temperature (-25 to +60°C, accuracy ±3°C) humidity (0-100%, accuracy ±3%), barometric pressure (300-110 hPa, accuracy ±0.2 hPa) and UV index (0-15, accuracy ±1). In stainless steel case. Works with Android 4.4 and newer and IOS 8.4..

SLC10422-TTL

SLC10422-TTL single channel serial converter with RS422/TTL...

SLC22232

Dual Channel Serial Line Voltage Level Converter RS232 to/from RS422. Dimensions 1.53 x 0.628 inches). Provides two bi-directional channels, each of which converts RS232 signals from a computer to/from RS422 or TTL format for a variety of digital devices...

SLC2J09ADS

PC Interface Cable for Air Data System. Pre-built interface cable that connects ADS Series Air Data System (via mating connector) to a RS232 serial port. >48 inch (1.22m) long, has pre-tinned pigtails for 10-32 VDC external power supply...

SLC2J09SF

PC Interface Kit. Cable assembly comprising of 9 pin RS232 connecter wired through to the MIDGII miniature mating connector, with flying leads for the external MIDGII DC supply. The cable has the SLC2232 PCB fitted inline to make the RS422 to RS232 conversion..

SLC2JUSB

Pre-built interface cable that connects MIDG II (via mating connector) to a PC USB port. >1.22m long. No external power source needed...

SCS Calibration for Vane and Thermoelectric Anemometers

Omni Instruments can provide SCS certificates for all of the MiniAir and ThermoAir ranges of anemometers. We can provide initial calibrations on brand new devices and also a recalibration service for any MiniAir and ThermoAir units returned to us for recalibration. Calibration can be done with air velocities of 0-50m/s, although the maximum speed will be dependant on the individual probes. Calibrations are completed according to ISO17025 by our calibration house. ...

LOADBUTM16X2.0

Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 32mm Diameter, 10mm Button and M16 x 2.0 Male Right-hand Thread, 16mm thread length. ...

SENSUS-G16P

2 inch Diaphragm Gas Meter with Pulse Output, Pulser: 1 imp/0.1 m³ ~ Reed Switch, Qmax 25m³/h ...

SER-9510

A service kit for the Tinytag Talk 2 and Tinytalk data loggers. This pack contains a replacement battery, desiccant pack and a service instruction sheet. ...

SER-9512

A service kit for the Tinytag Transit (TG-0050). This kit contains a replacement battery and a service instruction sheet. ...

SER-9540

XP-Tinytag Plus Re-ed Service kit, includes 8 x AA Batteries, seal and silica gel pack ...

Serial Line Voltage Level Converters, RS232, RS422, and TTL

The Microbotics serial converters offer full duplex serial line level conversion that supports connections to RS232, RS422, and TTL devices. Use of these converters allows a device with an RS232 port to obtain higher data rates and longer cable lengths. In addition, the small size of the Microbotics RS232-RS422 converters allows them to be wired directly into a harness. ...

Series 23 & 25 Pressure Transmitter

Series 23 piezoresistive pressure transmitters with a standard " BSP pressure port or Series 25 with a " flush diaphragm for more specialised applications. Pressure ranges 200mBar up to 1000 Bar with sealed or vented gauge, absolute or differential pressure references. Outputs are 2- or 3- wire 4/0-20mA or 0-10vDC ...

Series 23Y

Series 23Y Temperature Compensated Pressure Transmitter. Standard compensated range of 0 to 50°C, -10 to +80°C available on request. Covers ranges of 0.2 to 2 Bar with a floating mounted sensor with internal O-Ring ...

Series 35X Flush Diaphragm Pressure Transmitter

Series 35X Piezoresistive Pressure Transmitter with Flush Diaphragm. RS485 interface with programmable Analogue output and RS485 Modbus RTU Comms. ...

Series 6 Miniature Pressure Transducer

Series 6, miniature pressure transducer, gauge or absolute. Ranges up to 600 Bar, operating temperatures up to 100 C, low power consumption , 0.5 - 5mA. Output 600 - 1,000mV full scale at 4mA excitation. Pressure connection 1/4 inch BSP male thread. Unit tested for function only, with no calibration data supplied. ...

Series 8 miniature pressure transducer

Series 8, miniature pressure transducer, gauge or absolute. Ranges up to 1000 Bar, operating temperatures up to 150 deg C, low power consumption , 2 - 4 mA. Up to 900mV O/P at 4mA excitation. ...

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque. A speed sensor for monitoring in dynamic applications, enabling direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the bridge output signal and measure the torque applied to the shaft. Using the full bridge helps to diminish errors from any off-axis forces and increases ...

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque with an external electronics box. An integrated speed sensor enable the direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the bridge output signal and measure the torque applied to the shaft. Using the full bridge helps to diminish errors from any off-axis forces ...

BN4-4FMA10K-SS

¼" BSP female to ¼" NPT male adaptor. Converts a ¼" BSP to ¼" NPT thread. Stainless Steel 316 constructions and rated to 10,000 psi. Suitable for use with the LEO digital manometers and other pressure sensor. ...

ENCL-SV600

Small ABS Enclosure, sealed to IP 65, suitable for housing one SV300 or SV600 AC Voltage Sensors. When purchased with AC Voltage Sensor, the sensor will be mounted and wired with supplied transformer. Enclosure is fitted with glands for access. ...

SGW1-2044-IA-MB-DF1

Modbus ASCII/RTU to DF1 Converter, 2 RS232 ports. Industrial Applications. ...

SharpEye Flame Detector.

The SharpEye Flame Detectors are compliant with European standard EN54-10. These units are also SIL2 and EX approved for Zone 1 hazardous areas. The SharpEye detectors are specifically designed for all fire types and can use one of several sensors, either in UV, IR or a combination of both. ...

SKYWATCH-BL-500

Skywatch Bluetooth anemometer for smartphone, measures wind speed (3-150 km/h, accuracy ±3%), wind direction, temperature (-25 to +60°C, accuracy ±3°C) humidity (0-100%, accuracy ±3%), barometric pressure (300-110 hPa, accuracy ±0.2 hPa) and UV index (0-15, accuracy ±1). In stainless steel case. Works with Android 4.4 and newer and IOS 8.4 and newer. Information display in real time on your smartphone. ...

SLC10422-TTL

SLC10422-TTL single channel serial converter with RS422/TTL. ...

SLC22232

Dual Channel Serial Line Voltage Level Converter RS232 to/from RS422. Dimensions 1.53 x 0.628 inches). Provides two bi-directional channels, each of which converts RS232 signals from a computer to/from RS422 or TTL format for a variety of digital devices. ...

SLC2J09ADS

PC Interface Cable for Air Data System. Pre-built interface cable that connects ADS Series Air Data System (via mating connector) to a RS232 serial port. >48 inch (1.22m) long, has pre-tinned pigtails for 10-32 VDC external power supply. ...

SLC2J09SF

PC Interface Kit. Cable assembly comprising of 9 pin RS232 connecter wired through to the MIDGII miniature mating connector, with flying leads for the external MIDGII DC supply. The cable has the SLC2232 PCB fitted inline to make the RS422 to RS232 conversion ...

SLC2JUSB

Pre-built interface cable that connects MIDG II (via mating connector) to a PC USB port. >1.22m long. No external power source needed. ...

SCS Calibration for Vane and Thermoelectric Anemometers

Omni Instruments can provide SCS certificates for all of the MiniAir and ThermoAir ranges of anemometers. We can provide initial calibrations on brand new devices and also a recalibration service for any MiniAir and ThermoAir units returned to us for recalibration. Calibration can be done with air velocities of 0-50m/s,..

LOADBUTM16X2.0

Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 32mm Diameter, 10mm Button and M16 x 2.0 Male Right-hand Thread, 16mm thread length...

SENSUS-G16P

2 inch Diaphragm Gas Meter with Pulse Output, Pulser: 1 imp/0.1 m³ ~ Reed Switch, Qmax 25m³/h..

SER-9510

A service kit for the Tinytag Talk 2 and Tinytalk data loggers. This pack contains a replacement battery, desiccant pack and a service instruction sheet...

SER-9512

A service kit for the Tinytag Transit (TG-0050). This kit contains a replacement battery and a service instruction sheet...

SER-9540

XP-Tinytag Plus Re-ed Service kit, includes 8 x AA Batteries, seal and silica gel pack..

Serial Line Voltage Level Converters, RS232, RS422, and TTL

The Microbotics serial converters offer full duplex serial line level conversion that supports connections to RS232, RS422, and TTL devices. Use of these converters allows a device with an RS232 port to obtain higher data rates and longer cable lengths. In addition, the small size of the Microbotics RS232-RS422 converters..

Series 23 & 25 Pressure Transmitter

Series 23 piezoresistive pressure transmitters with a standard " BSP pressure port or Series 25 with a " flush diaphragm for more specialised applications. Pressure ranges 200mBar up to 1000 Bar with sealed or vented gauge, absolute or differential pressure references. Outputs are 2- or 3- wire 4/0-20mA or 0-10vDC..

Series 23Y

Series 23Y Temperature Compensated Pressure Transmitter. Standard compensated range of 0 to 50°C, -10 to +80°C available on request. Covers ranges of 0.2 to 2 Bar with a floating mounted sensor with internal O-Ring..

Series 35X Flush Diaphragm Pressure Transmitter

Series 35X Piezoresistive Pressure Transmitter with Flush Diaphragm. RS485 interface with programmable Analogue output and RS485 Modbus RTU Comms...

Series 6 Miniature Pressure Transducer

Series 6, miniature pressure transducer, gauge or absolute. Ranges up to 600 Bar, operating temperatures up to 100 C, low power consumption , 0.5 - 5mA. Output 600 - 1,000mV full scale at 4mA excitation. Pressure connection 1/4 inch BSP male thread. Unit tested for function only, with no calibration..

Series 8 miniature pressure transducer

Series 8, miniature pressure transducer, gauge or absolute. Ranges up to 1000 Bar, operating temperatures up to 150 deg C, low power consumption , 2 - 4 mA. Up to 900mV O/P at 4mA excitation...

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque. A speed sensor for monitoring in dynamic applications, enabling direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the..

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque with an external electronics box. An integrated speed sensor enable the direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to..

BN4-4FMA10K-SS

¼" BSP female to ¼" NPT male adaptor. Converts a ¼" BSP to ¼" NPT thread. Stainless Steel 316 constructions and rated to 10,000 psi. Suitable for use with the LEO digital manometers and other pressure sensor...

ENCL-SV600

Small ABS Enclosure, sealed to IP 65, suitable for housing one SV300 or SV600 AC Voltage Sensors. When purchased with AC Voltage Sensor, the sensor will be mounted and wired with supplied transformer. Enclosure is fitted with glands for access...

SGW1-2044-IA-MB-DF1

Modbus ASCII/RTU to DF1 Converter, 2 RS232 ports. Industrial Applications...

SharpEye Flame Detector.

The SharpEye Flame Detectors are compliant with European standard EN54-10. These units are also SIL2 and EX approved for Zone 1 hazardous areas. The SharpEye detectors are specifically designed for all fire types and can use one of several sensors, either in UV, IR or a combination of both...

SKYWATCH-BL-500

Skywatch Bluetooth anemometer for smartphone, measures wind speed (3-150 km/h, accuracy ±3%), wind direction, temperature (-25 to +60°C, accuracy ±3°C) humidity (0-100%, accuracy ±3%), barometric pressure (300-110 hPa, accuracy ±0.2 hPa) and UV index (0-15, accuracy ±1). In stainless steel case. Works with Android 4.4 and newer and IOS 8.4..

SLC10422-TTL

SLC10422-TTL single channel serial converter with RS422/TTL...

SLC22232

Dual Channel Serial Line Voltage Level Converter RS232 to/from RS422. Dimensions 1.53 x 0.628 inches). Provides two bi-directional channels, each of which converts RS232 signals from a computer to/from RS422 or TTL format for a variety of digital devices...

SLC2J09ADS

PC Interface Cable for Air Data System. Pre-built interface cable that connects ADS Series Air Data System (via mating connector) to a RS232 serial port. >48 inch (1.22m) long, has pre-tinned pigtails for 10-32 VDC external power supply...

SLC2J09SF

PC Interface Kit. Cable assembly comprising of 9 pin RS232 connecter wired through to the MIDGII miniature mating connector, with flying leads for the external MIDGII DC supply. The cable has the SLC2232 PCB fitted inline to make the RS422 to RS232 conversion..

SLC2JUSB

Pre-built interface cable that connects MIDG II (via mating connector) to a PC USB port. >1.22m long. No external power source needed...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Products

SCS Calibration for Vane and Thermoelectric Anemometers

LOADBUTM16X2.0

SENSUS-G16P

SER-9510

SER-9512

SER-9540

Serial Line Voltage Level Converters, RS232, RS422, and TTL

Series 23 & 25 Pressure Transmitter

Series 23Y

Series 35X Flush Diaphragm Pressure Transmitter

Series 6 Miniature Pressure Transducer

Series 8 miniature pressure transducer

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

BN4-4FMA10K-SS

ENCL-SV600

SGW1-2044-IA-MB-DF1

SharpEye Flame Detector.

SKYWATCH-BL-500

SLC10422-TTL

SLC22232

SLC2J09ADS

SLC2J09SF

SLC2JUSB

SCS Calibration for Vane and Thermoelectric Anemometers

LOADBUTM16X2.0

SENSUS-G16P

SER-9510

SER-9512

SER-9540

Serial Line Voltage Level Converters, RS232, RS422, and TTL

Series 23 & 25 Pressure Transmitter

Series 23Y

Series 35X Flush Diaphragm Pressure Transmitter

Series 6 Miniature Pressure Transducer

Series 8 miniature pressure transducer

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

BN4-4FMA10K-SS

ENCL-SV600

SGW1-2044-IA-MB-DF1

SharpEye Flame Detector.

SKYWATCH-BL-500

SLC10422-TTL

SLC22232

SLC2J09ADS

SLC2J09SF

SLC2JUSB

SCS Calibration for Vane and Thermoelectric Anemometers

LOADBUTM16X2.0

SENSUS-G16P

SER-9510

SER-9512

SER-9540

Serial Line Voltage Level Converters, RS232, RS422, and TTL

Series 23 & 25 Pressure Transmitter

Series 23Y

Series 35X Flush Diaphragm Pressure Transmitter

Series 6 Miniature Pressure Transducer

Series 8 miniature pressure transducer

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

BN4-4FMA10K-SS

ENCL-SV600

SGW1-2044-IA-MB-DF1

SharpEye Flame Detector.

SKYWATCH-BL-500

SLC10422-TTL

SLC22232

SLC2J09ADS

SLC2J09SF

SLC2JUSB

Contact us

8:30 AM to 5 PM Monday to Thursday8:30 AM to 3 PM on Friday.

We are here to help

Enquire now

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.