SC200A
SC200A Split core, self powered, AC current sensor. Current range 0-200 Amps, output 0-5vDC. Accuracy ±1% of reading from 10% to 100% of full scale. Dimensions 3.3" x 3.0" x 1.25" with a 1" square window and 8ft signal cable. Operating temperature -20 to +55°C...
Subsea Pressure Sensor
Keller series 33 subsea transmitter, ranges up to 1,360 Bar, 1/4" BSP male thread, 4-20mA Output, total error band 0.15% and RS485 Output total error band 0.1%FS. Subsea housing, external case pressure 400 Bar, with 5 pole subcon connector BH5MSS-316...
TEE
Tee Piece Air Pressure (Pack of 10) for PA-DPS units...
Tinytag PB-6005 PT100 Probe
Tinytag General Purpose PT100 Temperature Probe with moulded handle and connector (IP68 rated) for use with the TGP-4104 and TV-4104 data logger. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -50 to 300°C with a 25 second response time in water...
Tinytag PB-7002 PT1000 Probe
Tinytag Cyrogenic PT1000 Temperature Probe with moulded handle and connector (IP68 rated) for use with the TGP-4205 and TV-4204 data logger. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m or 3.0m cable. Temperature range -200 to +100°C with a 15 second response time in..
UA-MB30-SS
303 Stainless Steel straight mounting bracket for the ToughSonic 14 and TSPC-30S2 ultrasonic level sensors...
WP-40TH
WP-40TH Sample Holder with a water jacket for temperature control. Sample Holder is a brass, nickel-plated and is 112mm in diameter with an external depth of 95mm...
MPM4730[0-1MPA]-E-R4-22-M12-C2-G
MPM4730 Programmable Pressure Transmitter with 0-10 Bar basic range. 2 Wire, 4-20mA output plus RS485 serial comms. 4 Pin M12 electrical connection with ¼" BSP process connection. Programmed pressure range available from 0-2 Bar up to 0-10 Bar...
MRU Motion Reference Unit
Designed to meet off shore marine and hydrographic requirements, the MRU series offers accurate Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions from a compact, cost effective sensor. Heave accuracy is 5% or 5cm, while pitch & roll is just 0.03° after post processing. Outputs..
1416-PK-013
WindUltra 8-Pin M12 Connector with 10m of cable. Suitable for connecting the WindUltra sensor to Power and Serial Output...
17131038-5
Replacement Extended Range Li-ion Battery Pack for MX6 gas detector, MSHA/AUS Certified battery pack...
1957-PK-153
Maximet Marine 8-Pin M12 Connector with 10m of cable. Suitable for the GMX560 Weather Station for Power and Serial Communications...
5200-07C-BR
Set of two blocking rings for resealing pipework when flow meters are removed. Suitable for CDI-5200-07C flow meters..
812-009
M12 - U-bolt with a 116mm arc diameter. Order 4 per mounting kit...
CTX300-511
CTX300 gas detector for R143A Refrigerant Gas. Range 0-2000ppm. Power supply 15-32vDC with a 4-20mA output. IP66 Polycarbonate housing, dimensions 130 x 136 x 69mm...
GS-44E
GEN II radio transmitter with wired connections for up to 4 voltage/current inputs. Selectable Ranges 0-100mV, 0-1vDC, 0-10vDC, 0-20mA, 4-20mA plus EU scaling configured using DARCA software. The GS-44E has an input for an external 9vDC regulated power supply. No connections available for sensor supply when the external supply is..
MIEX64124
MiniAir 64EX Mini vane anemometer. Sensing head 22mm diameter x 28mm, probe length 175mm. Air velocity range 0-40m/s with a 4-20mA output. Accuracy ±1% of full scale, ±3% of reading. Power supply 9-24vDC Sensor is supplied with 20m cable to zener barrier housing. Operating range -10 to +80°C. Plastic sensing..
PB-6005-3M
Standard PT100 Temperature Probe with moulded handle and connector (IP68 rated) for use with the TGP-4104 and TV-4104 data logger. The stainless steel probe is 150mm long and 5mm in diameter with a 3m cable. Temperature range -50 to 300°C with a 25 second response time in water...
Tinytag PB-6006 PT100 Probe
Tinytag High Temperature PT100 Probe with stainless steel probe and overbraided fibre glass cable, it is ideally suited to high temperature monitoring applications. The stainless steel probe is 150mm long and 5mm in diameter with overbraided cable available in 1.5m and 3m lengths. Temperature range -50 to 600°C with a..
Tinytag PB-6007 PT100 Probe
Tinytag oven Temperature Probe with pointed stainless steel probe and PTFE cable, it is ideally suited to oven temperature monitoring applications. The stainless steel probe is 150mm long and 5mm in diameter with PTFE cable available in 1.5m, 3m and 5m lengths. Temperature range -50 to 250°C with a 20..
Tinytag PB-7003 PT1000 Probe
Tinytag Freezer PT1000 Probe with stainless steel probe with Silicone outer sheath and SPT Insulated cable, it is ideally suited to low temperature monitoring applications. The stainless steel probe is 50mm long and 6mm in diameter with 1.5m, 3m or 5m lengths. Temperature range -80 to 100°C with a 20..
Tinytag PB-7005 PT1000 Probe
Tinytag Cryogenic PT1000 Probe is a designed with a flat, flexible cable that can pass through a fridge or freezer door seal without leaving a gap. The probe is an IP67 waterproof probe using a high specification resin, with unique manufacturing techniques that allow both the sheath and the cables..
UA-MB30-SS90
303 Stainless Steel 90° mounting bracket for the ToughSonic 14 and TSPC-30S2 ultrasonic level sensors...
MSD
2GB MicroSD Card, for PyroMini -BRT and -CRT, and PM180 models, for storage and transfer of logged data. Includes SD Card adapter...
