Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Products

Home / Products

CAP-K-G1.5-3

Air Temperature probe with clamp 1.5m PTFE coated, triple insulated cable. Suitable for use with all substrate materials..
View Product

CDOM-CAL-600

600ml bottle of CDOM calibration solution. (For point 2 CDOM calibration)...
View Product

CEM-20

The CEM20 is the Channel Expansion Module for DT80 and DT85 data loggers Series 2 and above. This allows a further 60 single ended inputs (voltage, current or Thermocouple) or 20 fully differential inputs (PT100 or bridge) to be added to the DT80 or DT85. One full analogue input channel..
View Product

CHL-CAL

500ml Bottle of 1000 ppm Chloride Stock Solution for Dilution...
View Product

CHL-CAL-10

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration...
View Product

CHL-CAL-100

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution...
View Product

CRYO-IFC300

Cryotemp USB Download interface. Supplied with software, manual, docking station and USB connection cable...
View Product

DBBSS/TSF Torque & Tension Load Cell

Stainless Steel combined Torque and Axial Forces Load Cell. Ranges 1kN to 250kN, output 1.5mV/V to 3.0mV/V (refer to datasheet), accuracy 0.05%, sealed to IP65...
View Product
DFK - Duct Fixing Kit

DFK

Duct Fixing Kit (DFK). Kit includes 2m of 6mm i/d plastic tubing, 2 x pitot tubes and 4 fixing screws. The pitot tubes are cut at a 45° angle to allow it them to take static and dynamic air flow pressures...
View Product

DO-25

25ml DO Filling Solution for Galvanic DO Probes...
View Product

DO7441-H

Dissolved Oxygen sensor with a Lead anode and a HDPE membrane for low range applications. Range 0-100% saturation with a 4-20mA output. Sensors are fitted with a standard of 3m cable...
View Product

DP-AK

Accessory Kit for DPT and PS Sensors/Switches. Two PC Plastic Duct Connectors (24 x 24 x 85mm) and 4 Mounting Screws. 2m PVC Plastic Pressure Measurement Hose (Diameter 4/7mm). The plastic duct connectors are straight cut to take pressure inside areas, chambers or rooms...
View Product

Dual Output Position Sensor

The 1356 Series Dual Output Position Sensor is a non-contact, solid-state inductive position sensor designed to measure both linear and rotary (±45°) movement in harsh, high-vibration environments. Utilising a two-part construction, comprising a sealed sensor unit and an independent activator target, it eliminates internal moving parts, mechanical linkages, and contact..
View Product

DustIQ Soiling Monitoring System

The DustIQ Soiling Monitoring System is a professional-grade solution designed for accurate measurement of PV module soiling in solar power plants. Using unique Optical Soiling Measurement (OSM) technology, it continuously reports the Soiling Ratio (SR), Transmission Loss (TL), and module temperature every minute, day or night. Constructed from the same..
View Product
EasyLog CC Series Protective Bag EL-CC-BAG

EL-CC-BAG

Pack of 5 Waterproof Bags for EL-CC and EL-PDF Series Temperature Loggers. Provides continued IP67 rating for EL-CC series cold chain loggers after original case is opened. Bag Dimensions are 12 x 7cm. EL-CC-BAG will not allow humidity readings for loggers...
View Product

EL-P-TP

Basic, 1 meter long, type 2 thermistor probe with a stainless steel tip for use with all of the EasyLog TP data loggers...
View Product

EL-PROBE-EXTENDER-1.5M

1.5m Thermistor Probe Extension Cable. Male 3.5mm Jack to Female 3.5m Socket with Gold Plated Connections to limit signal loss. Suitable for use with EL-P-TP, EL-P-TP+ and EL-P-VAC Thermistor Probes..
View Product

EX-5

AQUAPLUS 5m Extension Cable. Connectors are suitable for 10m submersion..
View Product

FLU-CAL

500ml Bottle of 1000 ppm Fluoride Stock Solution for Dilution...
View Product

FLU-CAL-0.5

500ml Bottle of 0.5 ppm Fluoride Stock Solution for Direct Calibration...
View Product

FLU-CAL-5

500ml Bottle of 5 ppm Fluoride Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 0.5ppm solution...
View Product

FSCEIN-CAL

1L bottle containing 0.5g Fluorescein powder. (Add 1L of deionised water for 500mg/L stock detailed in probe manual and main page)...
View Product

FXT9/160

MSR145WD External FlexConnect Temperature Sensor. Range: -40 to +125°C, Accuracy ±0.1°C (-25 to 55°C), ±0.3°C (-40 to +125°C). Sensor is fitted with cable and FlexConnect connector. The sensor connects to the FlexConnect Box and MSR145WD data logger and will be automatically detected...
View Product

G2S05I09LMA

Range 3-38,1/2 inch BSPT (103 Bar), Stainless Steel..
View Product

CAP-K-G1.5-3

Air Temperature probe with clamp 1.5m PTFE coated, triple insulated cable. Suitable for use with all substrate materials..
View Product

CDOM-CAL-600

600ml bottle of CDOM calibration solution. (For point 2 CDOM calibration)...
View Product

CEM-20

The CEM20 is the Channel Expansion Module for DT80 and DT85 data loggers Series 2 and above. This allows a further 60 single ended inputs (voltage, current or Thermocouple) or 20 fully differential inputs (PT100 or bridge) to be added to the DT80 or DT85. One full analogue input channel..
View Product

CHL-CAL

500ml Bottle of 1000 ppm Chloride Stock Solution for Dilution...
View Product

CHL-CAL-10

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration...
View Product

CHL-CAL-100

500ml Bottle of 10 ppm Chloride Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution...
View Product

CRYO-IFC300

Cryotemp USB Download interface. Supplied with software, manual, docking station and USB connection cable...
View Product

DBBSS/TSF Torque & Tension Load Cell

Stainless Steel combined Torque and Axial Forces Load Cell. Ranges 1kN to 250kN, output 1.5mV/V to 3.0mV/V (refer to datasheet), accuracy 0.05%, sealed to IP65...
View Product
DFK - Duct Fixing Kit

DFK

Duct Fixing Kit (DFK). Kit includes 2m of 6mm i/d plastic tubing, 2 x pitot tubes and 4 fixing screws. The pitot tubes are cut at a 45° angle to allow it them to take static and dynamic air flow pressures...
View Product

DO-25

25ml DO Filling Solution for Galvanic DO Probes...
View Product

DO7441-H

Dissolved Oxygen sensor with a Lead anode and a HDPE membrane for low range applications. Range 0-100% saturation with a 4-20mA output. Sensors are fitted with a standard of 3m cable...
View Product

DP-AK

Accessory Kit for DPT and PS Sensors/Switches. Two PC Plastic Duct Connectors (24 x 24 x 85mm) and 4 Mounting Screws. 2m PVC Plastic Pressure Measurement Hose (Diameter 4/7mm). The plastic duct connectors are straight cut to take pressure inside areas, chambers or rooms...
View Product

Dual Output Position Sensor

The 1356 Series Dual Output Position Sensor is a non-contact, solid-state inductive position sensor designed to measure both linear and rotary (±45°) movement in harsh, high-vibration environments. Utilising a two-part construction, comprising a sealed sensor unit and an independent activator target, it eliminates internal moving parts, mechanical linkages, and contact..
View Product

DustIQ Soiling Monitoring System

The DustIQ Soiling Monitoring System is a professional-grade solution designed for accurate measurement of PV module soiling in solar power plants. Using unique Optical Soiling Measurement (OSM) technology, it continuously reports the Soiling Ratio (SR), Transmission Loss (TL), and module temperature every minute, day or night. Constructed from the same..
View Product
EasyLog CC Series Protective Bag EL-CC-BAG

EL-CC-BAG

Pack of 5 Waterproof Bags for EL-CC and EL-PDF Series Temperature Loggers. Provides continued IP67 rating for EL-CC series cold chain loggers after original case is opened. Bag Dimensions are 12 x 7cm. EL-CC-BAG will not allow humidity readings for loggers...
View Product

EL-P-TP

Basic, 1 meter long, type 2 thermistor probe with a stainless steel tip for use with all of the EasyLog TP data loggers...
View Product

EL-PROBE-EXTENDER-1.5M

1.5m Thermistor Probe Extension Cable. Male 3.5mm Jack to Female 3.5m Socket with Gold Plated Connections to limit signal loss. Suitable for use with EL-P-TP, EL-P-TP+ and EL-P-VAC Thermistor Probes..
View Product

EX-5

AQUAPLUS 5m Extension Cable. Connectors are suitable for 10m submersion..
View Product

FLU-CAL

500ml Bottle of 1000 ppm Fluoride Stock Solution for Dilution...
View Product

FLU-CAL-0.5

500ml Bottle of 0.5 ppm Fluoride Stock Solution for Direct Calibration...
View Product

FLU-CAL-5

500ml Bottle of 5 ppm Fluoride Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 0.5ppm solution...
View Product

FSCEIN-CAL

1L bottle containing 0.5g Fluorescein powder. (Add 1L of deionised water for 500mg/L stock detailed in probe manual and main page)...
View Product

FXT9/160

MSR145WD External FlexConnect Temperature Sensor. Range: -40 to +125°C, Accuracy ±0.1°C (-25 to 55°C), ±0.3°C (-40 to +125°C). Sensor is fitted with cable and FlexConnect connector. The sensor connects to the FlexConnect Box and MSR145WD data logger and will be automatically detected...
View Product

G2S05I09LMA

Range 3-38,1/2 inch BSPT (103 Bar), Stainless Steel..
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000