FS5108CV-8
Gas flow switch with PVC wires, 1/2 inch NPT female connection, stainless steel body with viton seals. SPDT switch 0.3 amps at 120 VAC, operating temperature -40 to 150 deg C. Adjustable flow range set point at 1 to 325 litres per minute..
FTR DIN Rail Mounted Power Supply – 24vDC at 3 Watts
The FTR switch mode power supply provides a fixed stabilised output of 24vDC with a maximum power output of 3 Watts from a 85-250vAC power supply. The FTR power supply provides an isolated power supply and is suitable for powering instruments such as 4-20mA field transmitters and other devices requiring..
Fuel Level Float Switch
Fuel level float switch, overhead suspension type, with 5 metres of cable, contact rated at up to 3 amps, 250 VAC, suitable for clean or dirty water, fuel oil, tank levels, channels etc...
G2A10I09LMA
Range 10-190, Size 1 inch BSPT (20.7 Bar) Aluminium body...
GEN II Wireless Energy Monitoring System
The GENII wireless energy monitoring system is able to cover a wide range of parameters. Transmitters are available for direct connections to ND-350 Power meters, U6 Gas meters, various heat meters, flow meters and other energy monitoring devices. A system can be customised to your requirements, with battery or externally..
GMX560 Marine Weather Station for Wind, Temp, RH & Pressure
The MaxiMet GMX560 Marine is similar to the GMX500 with an improved environmental protection, IP68, 6-axis compass and M12 Connection. Allowing it to survive harsh weather conditions encountered by buoys and unmanned surface vessels, including short-term immersion and compensation for tilt with pitch and roll data. The combined instrument is..
GSKINKIT-2615C
gSKIN U-Value Kit for measurement of u-value, heat flux and 2 temperature readings. Range ±300W/m² with a resolution of 0.22W/m². Sensor size 30mm x 30mm. Data logger has a logging frequency of 50Hz to every 12 hours and storage for up to 2 million readings. Kit consists of MSR Logger,..
HBS/1/733
Surface mount 3 wire PT100 sensor, with adhesive patch, with 3 metres of PVC cable...
HF132-WB1XD1XX
HygroFlex HF1 Transmitter, HF132-WB1XD1XX, for relative humidity and temperature measurement with display in a wall mounted enclosure. Standard Temperature Range: 0-50°C and Humidity 0-100%RH with Accuracy <±2%RH. 3-Wire Transmitter with 4-20mA Outputs...
HF3A-D1X0000210100
Wall Mounted 3/4-Wire HygroFlex HF3A Advanced Humidity and Temperature Transmitter with RS485 Modbus and 4-20mA Outputs. 0-50°C Temperature and 0-100% RH Relative Humidity. Enclosure with Horizontal Mounting and 1 x M12 electrical connection. Fitted with integrated probe...
HITEMP140-PT-5-TSK
Submersible Datalogger with a vented PTFE thermal barrier and a 24 inch Flexible Probe in a low profile 316 stainless steel enclosure. Temperature Range: -200 to +260 C from a 100 ohms Platinum RTD with a resolution of 0.01 C. Internal Memory 32,700, sample rate 1 second up to 24..
HP32-S-SET
HygroPalm 32 handheld relative humidity and temperature instrument with a single probe input. Psychrometric calculations of Dew point, wet-bulb temperature, mixing ratio, enthalpy, water vapor content and water vapor density. Includes HC2A-S Probe, HW5-CODE, micro USB cable, soft case...
HPP-110
9V PP3 Power Supply cable for HPS-120 radio modems. Allows the HPS120 transceiver to be powered by a standard 9V PP3 battery. Battery not included...
HPX-200BAR
HPX High Pressure Calibrator, Range 0 to 700 Bar, Accuracy 0.05% (10 to 40°C). HPX calibrator is supplied with: Hydraulic Oil; Carry Case; Spare Battery; Port Adaptor ¼ inch to ⅜ inch BSP; Port Adaptor ¼ inch to ½ inch BSP; Allen Key(s); K114A USB Interface Cable; Test Certificate and..
HT5
HT5 High Temperature Thickness Meter Probe for MT Series Thickness Meters...
I1-VAC-1
Smappee Power Box. Includes Voltage terminal to collect power supply voltage readings. Suitable for power supplied any electricity network worldwide. single, split or 3-phase. Range 90-284vAC, 50/60Hz, Dimensions: 55 x 55 x 26.6mm, Weight: 44g. Operating Temp 25 to 75°C @ 0-95%RH Non-Condensing...
ICA Series Miniature Analogue Strain Gauge Voltage & Current Signal Amplifiers.
The ICA series of In-Cell/Miniature Amplifiers are designed for applications where it is not possible to fit a larger amplifier due to space constraints, or where a direct amplified output is required from a sensor. The amplifiers will provide a standard industrial output from the mV/V output of load cells..
LEO-REC-CAPO-300MBAR
LEO Record CAPO Digital Manometer with digital display and data logger for low pressure and temperature. Range 0-300mBar, relative to external pressure, with a 0.2%FS accuracy. Internal memory for up to 57,000 readings and internal battery for up to 2 years operation. Pressure connection: Stainless Steel ¼" BSP male connection...
LEO-SUBSEA-4000M-ED
Subsea housing, stainless steel, for Keller Leo Record, with machined ports for 1/4BSP male connection. Assembly suitable for immersion in 4000M of seawater. Internal dimensions 86mm ID x 110mm long. 1/4 BSP through on end cap. With machined port 7/16NF port for subcon connector. Includes subcon bulkhead connector. Data from..
LEO5 Digital Manometer with Data Logger
The Keller LEO 5 is a combined pressure and temperature indicator and data logger available for pressure ranges up to 1000 Bar and featuring an IP65 rated stainless steel enclosure. The robust housing combines contemporary microcontroller-based electronics and capacitive-touch controls, operated through the environmentally-sealed safety glass front panel. The large..
LEO5-1-30BAR-¼BSP
LEO 5 High Resolution Manometer with Peak and Recording Function for up to 56,000 readings. Range -1 to 30 Bar with accuracy of 0.05%FS. Standard mode is at 2Hz, peak reading mode at 1kHz. Pressure connection 1/4 inch BSP male connection, compensated temperature 0 to 50°C, internal battery for up..
Leveline Packages
The LeveLine packages include a 10m water level sensor, 10m cable (or deployment code) to the surface and LL-PC-Kit. Units are ideal starter kit for monitoring rivers, docks or coastal water levels in a single package. Simply records water depths up to 10m, either with a logger receivable after logging,..
Leveline-Mini Water Level Sensor
The LeveLine-Mini is a precise water level and temperature sensor designed for diverse groundwater and surface water applications. Encased in a sealed unit, it integrates both temperature and level sensing capabilities. The LeveLine-Mini Absolute employs a durable piezoresistive ceramic pressure sensor, ensuring long-term stability and delivering an accuracy of 0.05%FS..
LevelSlick Specialist Liquid Level Sensor
The LevelSlick (7010/7014 series) is a specialist, solid-state capacitive liquid level sensor specifically engineered to measure challenging, high-viscosity, and foul liquids that typically cause standard sensors to fail. Featuring a non-stick, cavity-free PTFE/FEP coated probe and a robust 316 stainless steel housing with fully sealed IP68 electronics, it prevents residue..
