gSKIN U-Value Kit for measurement of u-value, heat flux and 2 temperature readings. Range ±300W/m² with a resolution of 0.22W/m². Sensor size 30mm x 30mm. Data logger has a logging frequency of 50Hz to every 12 hours and storage for up to 2 million readings. Kit consists of MSR Logger, ...
Submersible Datalogger with a vented PTFE thermal barrier and a 24 inch Flexible Probe in a low profile 316 stainless steel enclosure. Temperature Range: -200 to +260 C from a 100 ohms Platinum RTD with a resolution of 0.01 C. Internal Memory 32,700, sample rate 1 second up to 24 ...
HygroPalm 32 handheld relative humidity and temperature instrument with a single probe input. Psychrometric calculations of Dew point, wet-bulb temperature, mixing ratio, enthalpy, water vapor content and water vapor density. Includes HC2A-S Probe, HW5-CODE, micro USB cable, soft case. ...
9V PP3 Power Supply cable for HPS-120 radio modems. Allows the HPS120 transceiver to be powered by a standard 9V PP3 battery. Battery not included. ...
HPX High Pressure Calibrator, Range 0 to 700 Bar, Accuracy 0.05% (10 to 40°C). HPX calibrator is supplied with: Hydraulic Oil; Carry Case; Spare Battery; Port Adaptor ¼ inch to ⅜ inch BSP; Port Adaptor ¼ inch to ½ inch BSP; Allen Key(s); K114A USB Interface Cable; Test Certificate and ...
Smappee Power Box. Includes Voltage terminal to collect power supply voltage readings. Suitable for power supplied any electricity network worldwide. single, split or 3-phase. Range 90-284vAC, 50/60Hz, Dimensions: 55 x 55 x 26.6mm, Weight: 44g. Operating Temp 25 to 75°C @ 0-95%RH Non-Condensing. ...
ICA Series Miniature Analogue Strain Gauge Voltage & Current Signal Amplifiers.
The ICA series of In-Cell/Miniature Amplifiers are designed for applications where it is not possible to fit a larger amplifier due to space constraints, or where a direct amplified output is required from a sensor. The amplifiers will provide a standard industrial output from the mV/V output of load cells ...
LEO Record CAPO Digital Manometer with digital display and data logger for low pressure and temperature. Range 0-300mBar, relative to external pressure, with a 0.2%FS accuracy. Internal memory for up to 57,000 readings and internal battery for up to 2 years operation. Pressure connection: Stainless Steel ¼" BSP male connection. ...
Subsea housing, stainless steel, for Keller Leo Record, with machined ports for 1/4BSP male connection. Assembly suitable for immersion in 4000M of seawater. Internal dimensions 86mm ID x 110mm long. 1/4 BSP through on end cap. With machined port 7/16NF port for subcon connector. Includes subcon bulkhead connector. Data from ...
The Keller LEO 5 is a combined pressure and temperature indicator and data logger available for pressure ranges up to 1000 bar and featuring an IP66-rated stainless steel enclosure. The robust housing combines contemporary microcontroller-based electronics and capacitive-touch controls, operated through the environmentally-sealed safety glass front panel. The large backlit ...
LEO 5 High Resolution Manometer with Peak and Recording Function for up to 56,000 readings. Range -1 to 30 Bar with accuracy of 0.05%FS. Standard mode is at 2Hz, peak reading mode at 5kHz. Pressure connection 1/4 inch BSP male connection, compensated temperature 0 to 50 C, internal battery for ...
The LeveLine-Mini is a precise water level and temperature sensor designed for diverse groundwater and surface water applications. Encased in a sealed unit, it integrates both temperature and level sensing capabilities. The LeveLine-Mini Absolute employs a durable piezoresistive ceramic pressure sensor, ensuring long-term stability and delivering an accuracy of 0.05%FS ...
LPMS-B2 9-Axis IMU AHRS Motion Sensor with Bluetooth 2.1 & 4.1 Connectivity
The LPMS-B2 Motion Sensor is a miniature inertial measurement unit (IMU and Attitude and Heading Reference System (AHRS) with wireless Bluetooth Classic 2.1 and Bluetooth Low Energy 4.1 connectivity. The unit is very versatile, performing accurate, high speed orientation and displacement measurements using three different MEMS sensors (3-axis gyroscope, 3-axis ...
ToughSonic CHEM 35 Ultrasonic Level Sensor. Optimal range 305mm to 7.6m, max range 10.7m. Power Supply 10-30vDC with programmable outputs between 0-10vDC and 4-20mA, plus NPN & PNP switch outputs (configurable as sinking or sourcing) and RS232 serial interface. PVDF (Kynar) IP68 housing with 2" NPT/BSP universal lower thread, 1" ...
The 59070 magnetic reed switch is a small barrel sensor with an M8 x 1.25 thread activated by a permanent magnet. Switching distance 12-20mm with SPST normally open or closed contacts. The sensor draws no current in the non-activated state, making it ideal for battery power applications. The sensor is ...
The MCV2 converts an RS232 to RS485/RS422 signal with galvanic isolation between serial channels. The MCV2 is ideal for long distance communications and can be used in electrically noisy environments. The units include removeable terminal blocks and are DIN Rail mountable. Power supply 10-30vDC. ...
The Meteorological TFT Wind Display has been designed to operate with the WindObserver and WindSonic wind sensors, using the wind sensors NMEA output..The display will provide the power supply for the wind sensor and can be "daisy chained" to a second wind display, or other logging equipment, to transfer wind ...
gSKIN U-Value Kit for measurement of u-value, heat flux and 2 temperature readings. Range ±300W/m² with a resolution of 0.22W/m². Sensor size 30mm x 30mm. Data logger has a logging frequency of 50Hz to every 12 hours and storage for up to 2 million readings. Kit consists of MSR Logger, DLOG-4231; Sensor, GSKIN-X0677C; 2 external temperature probes (1m & 5m cables); carry case; and Mounting tape (MOUNT-1235). Data logger is configured for the calibration settings ...
Submersible Datalogger with a vented PTFE thermal barrier and a 24 inch Flexible Probe in a low profile 316 stainless steel enclosure. Temperature Range: -200 to +260 C from a 100 ohms Platinum RTD with a resolution of 0.01 C. Internal Memory 32,700, sample rate 1 second up to 24 hours and 1 year battery life. Operating Environment -40 to +140 C (short-term -200 to +250 C), 0 to 100%RH. Dimensions Body: 109 x 50.8mm ...
HygroPalm 32 handheld relative humidity and temperature instrument with a single probe input. Psychrometric calculations of Dew point, wet-bulb temperature, mixing ratio, enthalpy, water vapor content and water vapor density. Includes HC2A-S Probe, HW5-CODE, micro USB cable, soft case. ...
9V PP3 Power Supply cable for HPS-120 radio modems. Allows the HPS120 transceiver to be powered by a standard 9V PP3 battery. Battery not included. ...
HPX High Pressure Calibrator, Range 0 to 700 Bar, Accuracy 0.05% (10 to 40°C). HPX calibrator is supplied with: Hydraulic Oil; Carry Case; Spare Battery; Port Adaptor ¼ inch to ⅜ inch BSP; Port Adaptor ¼ inch to ½ inch BSP; Allen Key(s); K114A USB Interface Cable; Test Certificate and Operating instructions. ...
Smappee Power Box. Includes Voltage terminal to collect power supply voltage readings. Suitable for power supplied any electricity network worldwide. single, split or 3-phase. Range 90-284vAC, 50/60Hz, Dimensions: 55 x 55 x 26.6mm, Weight: 44g. Operating Temp 25 to 75°C @ 0-95%RH Non-Condensing. ...
ICA Series Miniature Analogue Strain Gauge Voltage & Current Signal Amplifiers.
The ICA series of In-Cell/Miniature Amplifiers are designed for applications where it is not possible to fit a larger amplifier due to space constraints, or where a direct amplified output is required from a sensor. The amplifiers will provide a standard industrial output from the mV/V output of load cells that is easier to connect to data loggers and other monitoring equipment. Options include 4-20mA, voltage and bipolar ±10V outputs calibrated and scaled as requested ...
LEO Record CAPO Digital Manometer with digital display and data logger for low pressure and temperature. Range 0-300mBar, relative to external pressure, with a 0.2%FS accuracy. Internal memory for up to 57,000 readings and internal battery for up to 2 years operation. Pressure connection: Stainless Steel ¼" BSP male connection. Rear mating socket for configuration and downloading logged data via K114A. ...
Subsea housing, stainless steel, for Keller Leo Record, with machined ports for 1/4BSP male connection. Assembly suitable for immersion in 4000M of seawater. Internal dimensions 86mm ID x 110mm long. 1/4 BSP through on end cap. With machined port 7/16NF port for subcon connector. Includes subcon bulkhead connector. Data from Leo Record can be downloaded without opening the housing (download cable LEO-SUBSEA-DNLD-CABLE required). ...
The Keller LEO 5 is a combined pressure and temperature indicator and data logger available for pressure ranges up to 1000 bar and featuring an IP66-rated stainless steel enclosure. The robust housing combines contemporary microcontroller-based electronics and capacitive-touch controls, operated through the environmentally-sealed safety glass front panel. The large backlit LCD display ensures readability in any lighting conditions. The LEO 5 combines the notable features of the LEO Record and LEX 1 digital pressure gauges, ...
LEO 5 High Resolution Manometer with Peak and Recording Function for up to 56,000 readings. Range -1 to 30 Bar with accuracy of 0.05%FS. Standard mode is at 2Hz, peak reading mode at 5kHz. Pressure connection 1/4 inch BSP male connection, compensated temperature 0 to 50 C, internal battery for up to 1,600 hours operation (160 hours in peak mode), backlit 5 digit display. IP66-rated stainless steel casing with sealed safety glass front panel and ...
The LeveLine-Mini is a precise water level and temperature sensor designed for diverse groundwater and surface water applications. Encased in a sealed unit, it integrates both temperature and level sensing capabilities. The LeveLine-Mini Absolute employs a durable piezoresistive ceramic pressure sensor, ensuring long-term stability and delivering an accuracy of 0.05%FS across various available level ranges, all of which are temperature compensated from -20 to 80°C. Offered with multiple cable configurations and absolute or gauge options, ...
LPMS-B2 9-Axis IMU AHRS Motion Sensor with Bluetooth 2.1 & 4.1 Connectivity
The LPMS-B2 Motion Sensor is a miniature inertial measurement unit (IMU and Attitude and Heading Reference System (AHRS) with wireless Bluetooth Classic 2.1 and Bluetooth Low Energy 4.1 connectivity. The unit is very versatile, performing accurate, high speed orientation and displacement measurements using three different MEMS sensors (3-axis gyroscope, 3-axis accelerometer and 3-axis magnetometer). The temperature, barometric pressure and humidity sensors allow accurate altitude and humidity measurements and the integral Kalman filters provide full orientation ...
LPMS-UTTL3: 9-Axis IMU /AHRS/Motion Sensor with UART TTL and USB connectivity. Accelerometer: 3 axes, ±20/±40/±80/±160m/s² (16 bits); Gyroscope: 3 axes, ±125/±245/±500/±1000/±2000°/s (16 bits); Magnetometer: 3 axes, ±4/±8/±12/±16 gauss (16 bits); Barometric Pressure: 300 to 1100hPa. Data output format: Raw Data; Euler Angle; Quaternion @ up to 400Hz. Power supply 5 to 18vDC (TTL), 5vDC (USB). Dimensions: 34 x 34.5 x 15.7mm, weight: 17.6g. The LPMS-UTTL2 includes a DB9 serial port for UART TTL output and ...
ToughSonic CHEM 35 Ultrasonic Level Sensor. Optimal range 305mm to 7.6m, max range 10.7m. Power Supply 10-30vDC with programmable outputs between 0-10vDC and 4-20mA, plus NPN & PNP switch outputs (configurable as sinking or sourcing) and RS232 serial interface. PVDF (Kynar) IP68 housing with 2" NPT/BSP universal lower thread, 1" NPT upper thread and 2m cable. Operating temperature -40 to +70°C, 0-100%RH. Dimensions 77mm diameter x 143mm long. ...
The 59070 magnetic reed switch is a small barrel sensor with an M8 x 1.25 thread activated by a permanent magnet. Switching distance 12-20mm with SPST normally open or closed contacts. The sensor draws no current in the non-activated state, making it ideal for battery power applications. The sensor is also well suited to high moisture and contaminated environments. The reed contacts allow for millions of operations and will work through materials such as wood, ...
The MCV2 converts an RS232 to RS485/RS422 signal with galvanic isolation between serial channels. The MCV2 is ideal for long distance communications and can be used in electrically noisy environments. The units include removeable terminal blocks and are DIN Rail mountable. Power supply 10-30vDC. ...
The Meteorological TFT Wind Display has been designed to operate with the WindObserver and WindSonic wind sensors, using the wind sensors NMEA output..The display will provide the power supply for the wind sensor and can be "daisy chained" to a second wind display, or other logging equipment, to transfer wind sensor information. The display is user configurable and can provide wind speed in mph, m/s, knots, Km/h and Beaufort. Power supply can be configured to ...
gSKIN U-Value Kit for measurement of u-value, heat flux and 2 temperature readings. Range ±300W/m² with a resolution of 0.22W/m². Sensor size 30mm x 30mm. Data logger has a logging frequency of 50Hz to every 12 hours and storage for up to 2 million readings. Kit consists of MSR Logger, ...
Submersible Datalogger with a vented PTFE thermal barrier and a 24 inch Flexible Probe in a low profile 316 stainless steel enclosure. Temperature Range: -200 to +260 C from a 100 ohms Platinum RTD with a resolution of 0.01 C. Internal Memory 32,700, sample rate 1 second up to 24 ...
HygroPalm 32 handheld relative humidity and temperature instrument with a single probe input. Psychrometric calculations of Dew point, wet-bulb temperature, mixing ratio, enthalpy, water vapor content and water vapor density. Includes HC2A-S Probe, HW5-CODE, micro USB cable, soft case. ...
9V PP3 Power Supply cable for HPS-120 radio modems. Allows the HPS120 transceiver to be powered by a standard 9V PP3 battery. Battery not included. ...
HPX High Pressure Calibrator, Range 0 to 700 Bar, Accuracy 0.05% (10 to 40°C). HPX calibrator is supplied with: Hydraulic Oil; Carry Case; Spare Battery; Port Adaptor ¼ inch to ⅜ inch BSP; Port Adaptor ¼ inch to ½ inch BSP; Allen Key(s); K114A USB Interface Cable; Test Certificate and ...
Smappee Power Box. Includes Voltage terminal to collect power supply voltage readings. Suitable for power supplied any electricity network worldwide. single, split or 3-phase. Range 90-284vAC, 50/60Hz, Dimensions: 55 x 55 x 26.6mm, Weight: 44g. Operating Temp 25 to 75°C @ 0-95%RH Non-Condensing. ...
ICA Series Miniature Analogue Strain Gauge Voltage & Current Signal Amplifiers.
The ICA series of In-Cell/Miniature Amplifiers are designed for applications where it is not possible to fit a larger amplifier due to space constraints, or where a direct amplified output is required from a sensor. The amplifiers will provide a standard industrial output from the mV/V output of load cells ...
LEO Record CAPO Digital Manometer with digital display and data logger for low pressure and temperature. Range 0-300mBar, relative to external pressure, with a 0.2%FS accuracy. Internal memory for up to 57,000 readings and internal battery for up to 2 years operation. Pressure connection: Stainless Steel ¼" BSP male connection. ...
Subsea housing, stainless steel, for Keller Leo Record, with machined ports for 1/4BSP male connection. Assembly suitable for immersion in 4000M of seawater. Internal dimensions 86mm ID x 110mm long. 1/4 BSP through on end cap. With machined port 7/16NF port for subcon connector. Includes subcon bulkhead connector. Data from ...
The Keller LEO 5 is a combined pressure and temperature indicator and data logger available for pressure ranges up to 1000 bar and featuring an IP66-rated stainless steel enclosure. The robust housing combines contemporary microcontroller-based electronics and capacitive-touch controls, operated through the environmentally-sealed safety glass front panel. The large backlit ...
LEO 5 High Resolution Manometer with Peak and Recording Function for up to 56,000 readings. Range -1 to 30 Bar with accuracy of 0.05%FS. Standard mode is at 2Hz, peak reading mode at 5kHz. Pressure connection 1/4 inch BSP male connection, compensated temperature 0 to 50 C, internal battery for ...
The LeveLine-Mini is a precise water level and temperature sensor designed for diverse groundwater and surface water applications. Encased in a sealed unit, it integrates both temperature and level sensing capabilities. The LeveLine-Mini Absolute employs a durable piezoresistive ceramic pressure sensor, ensuring long-term stability and delivering an accuracy of 0.05%FS ...
LPMS-B2 9-Axis IMU AHRS Motion Sensor with Bluetooth 2.1 & 4.1 Connectivity
The LPMS-B2 Motion Sensor is a miniature inertial measurement unit (IMU and Attitude and Heading Reference System (AHRS) with wireless Bluetooth Classic 2.1 and Bluetooth Low Energy 4.1 connectivity. The unit is very versatile, performing accurate, high speed orientation and displacement measurements using three different MEMS sensors (3-axis gyroscope, 3-axis ...
ToughSonic CHEM 35 Ultrasonic Level Sensor. Optimal range 305mm to 7.6m, max range 10.7m. Power Supply 10-30vDC with programmable outputs between 0-10vDC and 4-20mA, plus NPN & PNP switch outputs (configurable as sinking or sourcing) and RS232 serial interface. PVDF (Kynar) IP68 housing with 2" NPT/BSP universal lower thread, 1" ...
The 59070 magnetic reed switch is a small barrel sensor with an M8 x 1.25 thread activated by a permanent magnet. Switching distance 12-20mm with SPST normally open or closed contacts. The sensor draws no current in the non-activated state, making it ideal for battery power applications. The sensor is ...
The MCV2 converts an RS232 to RS485/RS422 signal with galvanic isolation between serial channels. The MCV2 is ideal for long distance communications and can be used in electrically noisy environments. The units include removeable terminal blocks and are DIN Rail mountable. Power supply 10-30vDC. ...
The Meteorological TFT Wind Display has been designed to operate with the WindObserver and WindSonic wind sensors, using the wind sensors NMEA output..The display will provide the power supply for the wind sensor and can be "daisy chained" to a second wind display, or other logging equipment, to transfer wind ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
