MTN/VM330D
MTN/VM330D High Performance Vibration Meter Kit. Meter will provide readings for vibrations, acceleration and displacement. The kit consists of a compact vibration meter, dual-output general purpose sensor, magnetic base and spike, a coiled cable with 4-pin Lumberg connector at each end, foam-lined protective carry case, universal battery chargers and calibration..
Multi-Point Air Velocity Probes & PA267 Differential Pressure Sensor.
A multi-point air velocity probes system using the PA267 differential pressure sensor and AV-EP or AV-MPS air velocity probes. This system can be used to ensure that recommended flow rates for public buildings and industrial plant are achieved. Suitable for flow ranges of 0 - 40m/s...
MX16 Easy Duo Gas Detectors with Control Panel
The MX16 Easy Duo is a combined MX16 Gas Controller and Single Gas Detector for a simple factory configured gas detection system. The 'Easy Duo' set includes an MX16 Controller pre-configured with an OLCT10N to detect Oxygen, Carbon Monoxide, Carbon Dioxide, Methane (0-4.4%Vol or 0-5%Vol) Hydrogen gas. The MX16 Controller..
MX16-N-001-0-0-0
Easy Duo MX16 Gas Detection Controller with OLCT10N for CH4 (Methane) fitted with 10m cable. Range 0-5% Volume. 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x 266..
N1040i Universal Process Indicator
The N1040i Universal indicator is a compact universal display suitable for most common Thermocouple, PT100 RTD and linear 4-20mA, Voltage and mV inputs. The unit is housed in a 1/16 DIN enclosure with a very simple configuration interface to allow programming. The N1040i has optional RS485 interface, two optional alarm..
N1040I-RA
N1040i Universal Process Indicator with one alarm relay (SPDT) and one 4-20mA output. Suitable for PT100, Thermocouples, 0/4-20mA, 0-50mV and 0-5/10V inputs. Programmable via front keypad and bright LED display. Power Supply: 100-240vAC, 48 to 240vDC...
N321S Electronic Thermostat For Solar Heating
The N321S Electronic Thermostat is designed for solar water heating control. The display has the same options as the N321 but includes a differential controller that compares two different sensors, ensure water is only cycled from the solar collector to the storage tank when it is significantly higher than the..
OLC(T)10 EXPLO Gas Detectors for Explosive Gases
The OLC(T)10 Flammable gas detectors are designed for commercial applications and units are available for safe area and hazardous area applications. These detectors are ideal for the continuous monitoring of flammable gases present in car parks or boiler rooms. the OLC10 TWIN units can be connected in a single line..
OLCT10N-AP-001
OLCT10N-AP-001 Poison Resistant Gas Detector for Methane (CH4), Range 0-5% Volume. Output: RS485 Modbus RTU. Power Supply: 12-30vDC, Consumption 50mA typ. Operating temperature: -20 to +55°C. Life span: 48 Months. Plastic housing, 118 x 157 x 60mm, IP65. Non-Hazardous Area Only...
OMC-154
Calibration Certificate for OMC-150 and OMC-160 windspeed Calibration certificate for wind speed sensor, by V.U.B. (university of Brussels) 10-point calibration up to 40 m/s..
Omega Water Meters for Cold Water.
Full bore, Helix Woltmann type meter suitable for cold water. The Omega-WE-SDC is a super dry dial type meter with a 360° rotating display. Pipe diameters from 2" (50mm) up to 20" (500mm) with a PN16 flanged connection and a flow rate ranges of 40m³/h up to 5,000m³/h. Unit is..
OMEGA-WE-SDC400
OMEGA Helix Woltmann Type Bulk Water Meter. Pipe diameter 400mm with PN16 flanged connections, flow range: Qmin 20m³/hr; Qn 1600m³/hr; Qmax 2000m³/hr. Epoxy coated cast Iron body suitable for up to water up to 30°C. All OMEGA Flowmeters come prepared for a pulse output of Ltr/pulse. Additional pulse output options..
OMK610-NP
OMK610 Squirrel oven data logger system. Maximum of 50 minutes at 250C. Complete kit consisting of OQ610 Squirrel data logger. Complete with TB610 thermal barrier, USB connection cable, light weight carry case, getting started guide and Paintview configuration and data analysis software. Probes are not include in this kit...
OMNI-MC-7825G
MC-7825G Grain Moisture Meter with insertion probe measurement. LCD Display, range 7-30% in an operating range of 0-50°C...
OMNI-TUF-200F-2-5-ADAR
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with Medium (M1) transducers for pipe sizes 2 inch (DN50) to 28 inch (DN700), complete with 5 metres of shielded cable. Outputs, RS232, 4-20mA for flow rate and Pulse for flow total. Power supply 8-36vDC and 240vAC...
P100 Cylinder Linear Position Sensor
The P100 sensor is an affordable, durable, high accuracy linear position sensors specifically designed for use in hydraulic and pneumatic cylinders where long life and cost are important. The P100 linear sensor is particularly suitable for OEM customers who require good performance in hard environments such as industrial machinery. It..
PA-DPS-90W
PA-DPS Differential Air Pressure Switch in an IP65 enclosure. Range 20-300 pascals with a Silver Cadmium Oxide (AgCdO) contacts suitable for up to 5A (0.8A)/230vAC or 2A @ 30vDC. 6mm id pressure connections. Dimensions 81mm diameter x 52mm high. Units come complete with duct fixing kit (consisting of 2 x..
PA267-50
PA267 Differential Pressure Transmitter in an IP65 enclosure. Power supply 10-30vDC, range 0-50 pascals with a 4-20mA output and accuracy of 1%FS. STOCK ITEM limited availability, contact us for availability...
PD33XEI Series Differential Pressure Transmitter for Hazardous Applications
PD33XEI Series Differential Pressure Transmitter for hazardous applications. Differential pressure range 0-1 to 0-30 Bar DP. Output options 4-20mA or 0-10V with RS485 digital connection available for configuration or higher precision outputs. EX-Classification ia ICC T4...T6...
Portable Flow Meter for Open Channel Flow Measurement
This unit utilises the MiniWater6 Mini probe and a LogBox data logger to provide a versatile and accurate portable measurement and logging device for the measurement of water flows in open channels, tanks and chambers. The measurement range up to 10m/s. Optional sensors for temperature, distance, level and rainfall...
PR36XW EI
PR36XW EI intrinsically safe submersible level transmitter..
PR41X Low Range Pressure Transmitter.
The PR41X series are designed for measuring very low pressure values in the mBar or µBar ranges. The Series 41X capacitive pressure transmitter from Keller combines a ceramic measurement cell for low pressure ranges with the µP electronics of the digital series 30 transmitter. The pressure values from the signals..
PRO75D-MID
MID Certified PRO75D Energy Meter. 75mm wide DIN Rail mounting, LCD display, suitable for single phase networks measuring voltage 230vAC 50Hz, current range 0-100 amps, comes with a pulse output. MID approved suitable for billing purposes accuracy class B (EN50470.03). Suitable for measuring the kWh generated by the solar panels..
QI-300-V-485
QI-300-V-485 single phase RMS current transformer, input range ±300 Amps, power supply 12-30vDC. Accuracy 0.5%FS. Bandwidth 20-1000Hz. RS485 Modbus output, and 0-10vDC output...
