1405-PK-112
Spare WindSonic Connector suitable for WindSonic M with serial and analogue outputs. 1405-PK-112 consists of 12-Way Connector Head, Part Number 020-04990, and 7 piece Metal Back Shell, Part Number 020-04991, 3 x Solder bucket 5 Pack, Part Number 020-04469...
BATT/12/SLA/3.2
Sealed Lead Acid (SLA) Battery. Storage capacity 3.2Ah, Output 12 V. Dimensions 67mm x 134mm x 64mm. Weight 1.2Kg...
E2-05XX-ACT
5m Anthracite adaptor cable with HC2 probe connection, tin-plated with flying leads. Cable includes a voltage regulator for 5-24vDC or 5-16vAC supply. Operating range: maximum 70 C...
BATT/12/SLA/7
Sealed Lead Acid (SLA) Battery. Storage capacity 7Ah, Output 12 V. Dimensions 65mm x 151mm x 97.5mm. Weight 2.8Kg...
BATT/12/SLA/12
Sealed Lead Acid (SLA) Battery. Storage capacity 12Ah, Output 12 V. Dimensions 97.5mm x 151mm x 98mm. Weight 4.0Kg...
BATT/12/SLA/17
Sealed Lead Acid (SLA) Battery. Storage capacity 17Ah, Output 12 V. Dimensions 167mm x 181mm x 76mm. Weight 6.1Kg...
BATT/12/SLA/24
Sealed lead acid battery. Storage capacity 24Ah, Output 12 V. Dimensions 125mm x 166mm x 175mm. Weight 8.65Kg...
BATT/12/SLA/38
Sealed Lead Acid (SLA) battery. Storage capacity 38Ah, Output 12 V. Dimensions 170mm x 170mm x 197mm. Weight 13.8Kg...
8803900150
Polyamide protective tip for the RHT Climate transmitters with side openings that allow the flow from environment to the sensor element. This tip is supplied as standard on RHT Climate units. IP30 Rated...
ANT-EXT-15CM-SMAMRA-SMAF
15cm Antenna extension cable, right angled SMA Male to SMA Female..
DSC-USB-FQ
DSC-USB-FQ High Speed Load Cell Digitiser Module. The DSC-USB-FQ is a USB load cell interface designed to convert load cell inputs into a digital USB Serial output. High speed analysis, 4,800 samples per second. It is housed in a rugged plastic enclosure (71 x 51 x 20mm) rated to IP50..
8803900130
High Density Polyethylene (PTFE) protective tip for the RHT Climate Transmitters. Produced in porous material, protects the sensor element from dust and other solid particles. Due to the reduced contact with the environment, the response time will be higher than when using Polyamide tips. IP40 Rated...
E3-02XX-ACT
2m white adaptor cable with HC2 probe connection, tin-plated with flying leads. Cable includes a voltage regulator for 5-24vDC or 5-16vAC supply. Operating range: maximum 70 C...
E3-05XX-ACT
5m White adaptor cable with HC2 probe connection, tin-plated with flying leads. Cable includes a voltage regulator for 5-24vDC or 5-16vAC supply. Operating range: maximum 70 C...
Bluetooth Interface Module
The Bluetooth Interface Module allows the SGR and ORT Torque Transducers to connect to a nearby Bluetooth device allowing the sensors to be connected to and Android device. The connected Android device can then be used as the monitoring device with real-time readings. The device can also set filters and..
CAB4CORESCR
4 core screened cable (coloured red, blue, green and yellow), 7 x 0.2mm strands, with PVC insulation. 100m Reel...
Ethernet Interface Module ENET-01
The Ethernet Interface Module connects the SGR and ORT Torque Transducers to a Local Area Network allow the sensors to be connected from anywhere connection on the LAN. If the network has access to the Internet, devices can be connected from anywhere with access. The Torqview software, the Advanced Torque..
17154367
The replacement lithium thionyl chloride (Li/SOCL2) 3.6V battery is for the Tango TX1 gas detector..
6343489
Stainless Steel, M20 cable gland kit for armoured cable...
888260-1
Propane Calibration Warning Level Function Check Filter. Gas Concentration: 110-270LEL.m Propane..
98.0035
Plastic Carrying Case. Suitable for use with MiniAir20, MC20 and HygroAir sensors and accessories. Carrying case includes a foam inlay with compartments for MC20 operating display, up to 3 handle mounted sensors, mobile printer, extension rods, replacement snap heads and HygroAir sensor and extension rod with cable...
AC1211
Mains adaptor for the HygroLab C1, 240vAC to 12vDC...
AC3006
Interface cable for connecting HygroFlex, HygroPalm and HygroLog instruments to a USB port on a PC. Instrument will require to be supplied with power. Requires HW5, or HW4, software installed on the PC...
CDI-CALIB
Printed Manufacturers Calibration Certificate for CDI flow meters. Traceable to NIST standards...
