Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Products

Home / Products

PT916-4

PT916 temperature sensor with a closed end 1/8 inch diameter, 4" long Stainless Steel tube and 3 feet (0.9m) Teflon insulated leads. Temperature Range: -50 to 75 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 3.0 Seconds in stirred oil bath...
View Product

PT916-6

PT916 temperature sensor with a closed end 1/8 inch diameter, 6" long Stainless Steel tube and 3 feet (0.9m) Teflon insulated leads. Temperature Range: -50 to 75 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 3.0 Seconds in stirred oil bath...
View Product

PT933

PT933 temperature sensor is a closed end stainless steel tube, 3/16" diameter. by 1" long, with 20 foot cable. Cable is parallel bonded 24 gage, PVC insulated leads. Temperature Range: -50 to 105 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C...
View Product

PT960

PT960 rugged Stainless Steel temperature sensor. Probe dimensions: 6mm diameter, 50mm long and 6.1m TPE jacketed cable. Ideal for immersion, HVAC and soil burial applications. Temperature Range: -40 to 100 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 6.0 Seconds in..
View Product

PUCABLE

Polyurethane waterproof cable, price per metre...
View Product
WindUltra Mount for 1 Inch Pole

1416-PK-021

WindUltra Pole Mount 1 Inch Adaptor, Black Poly Carbonate construction. The pole mount adaptor allows you to connect a WIndUltra sensor to be mounted on a pole with external diameter of 25-26mm...
View Product

1733-PK-077

MetConnect Tipping Rain Bucket can wired to pins 7 and 8 of the M12 Connector for Analogue 1/2 or PRT inputs on the MetConnect Hub Box under the mounting bracket...
View Product

6797942

19" Cable Plate with Brush for MX52. 2 Plates max. per cabinet..
View Product
Six Lead Set for MultiCal Thermocouple Simulators

816-100

Thermocouple lead set. This set comprises of six leads, one for each thermocouple type K, J, T, R/S, N and E...
View Product
TxRail-USB Programmable Transmitter

8806037306

TxRail-USB DIN Rail mounted temperature transmitter with programmable 4-20mA and 0-10vDC Output. Suitable for PT100, Thermocouple (Type J, K, T, E, N, R or S), NTC and 0-50mV with configurable measurement ranges. Transmitter generates a 2-wire loop powered 4-20mA output or a 0-10V output. USB micro-B port allows direct PC..
View Product

8811100001

DigiRail-2A, Dual Universal Analogue Input. The unit provides a dual channel input for Thermocouples, PT100, mV, V and mA inputs with a RS485 ModBus output. The units provide a internal CJC for thermocouples and both input channels and the RS485 port are fully isolated up to 1,000V. Units are DIN..
View Product

8813099050

IrLINK-3-USB Infrared Interface for USB and LogChart Software..
View Product
Aquaprobe AP-7000

AP-7000 Aquaprobe Package

The AP-7000 water monitoring probe includes a self cleaning mechanism to clear all of the monitoring probes for bio-fouling and brushes each probe multiple times per cycle. The AP-7000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-7000 features..
View Product
CA-12/32 Marine Stays Kit

CA-12/32

2 x 1.2m Polished Stainless Steel Pole Sections/ Cut to Required Length, 2 Hinged Pushpit Clamps to fit 25-32mm Rail. Marine Stays Kit suitable for Rutland 914i, 500 and ideal for Rutland 1200 series Windchargers...
View Product

CA-12/39

2 x 1.35m Polished Stainless Steel Pole Sections/ Cut to Required Length, 2 Hinged Pushpit Clamps to fit 25-32mm Rail. Marine Stays Kit suitable for Rutland 914i , 500 and ideal for Rutland 1200 series Windchargers...
View Product
CA-12/43 Stays Accessories Kit

CA-12/43

Hardware for a single solid stays kit. Kit includes: 1 Hinged Pushpit Clamps to fit 25-32mm Rail incl. rubber insert; 2 End caps for 1 stay and fixings. Choose 2 of these to custom make your stays kit with your own lengths of 22mm diameter..
View Product

ENC-SP-FIXING-KIT

Bespoke enclosure and solar panel fixing kit. To fix the steel enclosure to the tripod, with the solar panel mounted on top of the enclosure at 10 degrees from horizontal. Suitable for up to 20 Watt Solar Panels...
View Product

ENCL-WMT-EXSML-BATT

Small weatherproof ABS enclosure fitted with a 1.2AH 12V lead acid battery and cable gland for external sensors. Sensor wired to relevant data logger as required...
View Product

ENCL-WMT-EXSML-DEPTH

Small ABS Compensation Box. Provides a venting point for a depth sensor close to the monitoring location, whilst offering a connection for a longer cable back to monitoring equipment. Enclosure is IP67 rated to prevent water ingress but not air tight...
View Product
Fixed Mounting Bracket FBS

FBS

Fixed 'L' Shaped Mounting Bracket for PyroCouple or PyroMini Temperature Sensors. Provides a rigid support for the sensor and fine adjustment in a single plane...
View Product
HC2-C05 HygroClip 2 Mini Probe

HC2-C05

HygroClip 2 Mini Probe HC2-C05, cable mounted probe for temperature and humidity measurements. Range 0-100%RH and -40 to +85°C. The brass, nickel-plated probe has a diameter of 5mm and is attached by 2m of cable to a 7 pin UART interface. Output is 0-1V and is freely scaleable. Ideal for..
View Product
LEO2 Swivel

LEO2-SWIVEL-1/4″BSP

Swivel adapter for Leo 2 Manometers with 7/16" UNF Female to 1/4" BSP Male Thread. Supplied with Inlet...
View Product
LEO2-SWIVELL-1/4NPT

LEO2-SWIVEL-1/4″NPT

Swivel adapter for Leo 2 Manometers with 7/16" UNF Female to 1/4" NPT Male Thread. Supplied with Inlet...
View Product

LOADBUTM6X1.0

Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 12.5mm Diameter, 6mm Button and M6 x 1.0 Male Right-hand Thread, 9mm thread length...
View Product

PT916-4

PT916 temperature sensor with a closed end 1/8 inch diameter, 4" long Stainless Steel tube and 3 feet (0.9m) Teflon insulated leads. Temperature Range: -50 to 75 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 3.0 Seconds in stirred oil bath...
View Product

PT916-6

PT916 temperature sensor with a closed end 1/8 inch diameter, 6" long Stainless Steel tube and 3 feet (0.9m) Teflon insulated leads. Temperature Range: -50 to 75 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 3.0 Seconds in stirred oil bath...
View Product

PT933

PT933 temperature sensor is a closed end stainless steel tube, 3/16" diameter. by 1" long, with 20 foot cable. Cable is parallel bonded 24 gage, PVC insulated leads. Temperature Range: -50 to 105 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C...
View Product

PT960

PT960 rugged Stainless Steel temperature sensor. Probe dimensions: 6mm diameter, 50mm long and 6.1m TPE jacketed cable. Ideal for immersion, HVAC and soil burial applications. Temperature Range: -40 to 100 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 6.0 Seconds in..
View Product

PUCABLE

Polyurethane waterproof cable, price per metre...
View Product
WindUltra Mount for 1 Inch Pole

1416-PK-021

WindUltra Pole Mount 1 Inch Adaptor, Black Poly Carbonate construction. The pole mount adaptor allows you to connect a WIndUltra sensor to be mounted on a pole with external diameter of 25-26mm...
View Product

1733-PK-077

MetConnect Tipping Rain Bucket can wired to pins 7 and 8 of the M12 Connector for Analogue 1/2 or PRT inputs on the MetConnect Hub Box under the mounting bracket...
View Product

6797942

19" Cable Plate with Brush for MX52. 2 Plates max. per cabinet..
View Product
Six Lead Set for MultiCal Thermocouple Simulators

816-100

Thermocouple lead set. This set comprises of six leads, one for each thermocouple type K, J, T, R/S, N and E...
View Product
TxRail-USB Programmable Transmitter

8806037306

TxRail-USB DIN Rail mounted temperature transmitter with programmable 4-20mA and 0-10vDC Output. Suitable for PT100, Thermocouple (Type J, K, T, E, N, R or S), NTC and 0-50mV with configurable measurement ranges. Transmitter generates a 2-wire loop powered 4-20mA output or a 0-10V output. USB micro-B port allows direct PC..
View Product

8811100001

DigiRail-2A, Dual Universal Analogue Input. The unit provides a dual channel input for Thermocouples, PT100, mV, V and mA inputs with a RS485 ModBus output. The units provide a internal CJC for thermocouples and both input channels and the RS485 port are fully isolated up to 1,000V. Units are DIN..
View Product

8813099050

IrLINK-3-USB Infrared Interface for USB and LogChart Software..
View Product
Aquaprobe AP-7000

AP-7000 Aquaprobe Package

The AP-7000 water monitoring probe includes a self cleaning mechanism to clear all of the monitoring probes for bio-fouling and brushes each probe multiple times per cycle. The AP-7000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-7000 features..
View Product
CA-12/32 Marine Stays Kit

CA-12/32

2 x 1.2m Polished Stainless Steel Pole Sections/ Cut to Required Length, 2 Hinged Pushpit Clamps to fit 25-32mm Rail. Marine Stays Kit suitable for Rutland 914i, 500 and ideal for Rutland 1200 series Windchargers...
View Product

CA-12/39

2 x 1.35m Polished Stainless Steel Pole Sections/ Cut to Required Length, 2 Hinged Pushpit Clamps to fit 25-32mm Rail. Marine Stays Kit suitable for Rutland 914i , 500 and ideal for Rutland 1200 series Windchargers...
View Product
CA-12/43 Stays Accessories Kit

CA-12/43

Hardware for a single solid stays kit. Kit includes: 1 Hinged Pushpit Clamps to fit 25-32mm Rail incl. rubber insert; 2 End caps for 1 stay and fixings. Choose 2 of these to custom make your stays kit with your own lengths of 22mm diameter..
View Product

ENC-SP-FIXING-KIT

Bespoke enclosure and solar panel fixing kit. To fix the steel enclosure to the tripod, with the solar panel mounted on top of the enclosure at 10 degrees from horizontal. Suitable for up to 20 Watt Solar Panels...
View Product

ENCL-WMT-EXSML-BATT

Small weatherproof ABS enclosure fitted with a 1.2AH 12V lead acid battery and cable gland for external sensors. Sensor wired to relevant data logger as required...
View Product

ENCL-WMT-EXSML-DEPTH

Small ABS Compensation Box. Provides a venting point for a depth sensor close to the monitoring location, whilst offering a connection for a longer cable back to monitoring equipment. Enclosure is IP67 rated to prevent water ingress but not air tight...
View Product
Fixed Mounting Bracket FBS

FBS

Fixed 'L' Shaped Mounting Bracket for PyroCouple or PyroMini Temperature Sensors. Provides a rigid support for the sensor and fine adjustment in a single plane...
View Product
HC2-C05 HygroClip 2 Mini Probe

HC2-C05

HygroClip 2 Mini Probe HC2-C05, cable mounted probe for temperature and humidity measurements. Range 0-100%RH and -40 to +85°C. The brass, nickel-plated probe has a diameter of 5mm and is attached by 2m of cable to a 7 pin UART interface. Output is 0-1V and is freely scaleable. Ideal for..
View Product
LEO2 Swivel

LEO2-SWIVEL-1/4″BSP

Swivel adapter for Leo 2 Manometers with 7/16" UNF Female to 1/4" BSP Male Thread. Supplied with Inlet...
View Product
LEO2-SWIVELL-1/4NPT

LEO2-SWIVEL-1/4″NPT

Swivel adapter for Leo 2 Manometers with 7/16" UNF Female to 1/4" NPT Male Thread. Supplied with Inlet...
View Product

LOADBUTM6X1.0

Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 12.5mm Diameter, 6mm Button and M6 x 1.0 Male Right-hand Thread, 9mm thread length...
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000